Abrasives > Coated & Non-Woven Abrasives (ET04) - (34482 Products)
Abrasives > Coated & Non-Woven Abrasives (ET04)
Corner Radius End Mill: 1.50 mm Dia, 1.50 mm LOC, 30 deg Helix, Hardmax Coated, Corner Radius End, Centercutting Series HLRS
Item #: 09995572
Brand: US Union Tool
Model #: 2931510
Product Specifications
| Mill Diameter (mm) | 1.50 |
| Number Of Flutes | 2 |
| Length of Cut (mm) | 1.50 |
| End Mill Material | Solid Carbide |
| Coating/Finish | Hardmax |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.05 |
| Overall Length (mm) | 50 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.2500 |
| Length Type | Long |
| Extended Reach | Yes |
| Shank Diameter (mm) | 6 |
| Mill Diameter Tolerance | -0.015 |
| Shank Diameter Tolerance | -0.005 |
| UNSPSC Code | 27112803 |
| Material Grade | Super MG |
| Series | HLRS |
$71.38
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 1; Flute Type: Spiral; Number Of Flutes: 6; End Mill Material: Solid Carbide; Length of Cut (Inch): 1; Coating/Finish: AlCr
Item #: 56542699
Brand: Emuge
Model #: 3941L.100090
Product Specifications
| Mill Diameter (Fractional Inch) | 1 |
| Flute Type | Spiral |
| Number Of Flutes | 6 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 1 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Corner Radius (Decimal Inch) | 0.0900 |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 1 |
| Shank Type | Straight |
| Length Type | Stub |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 35/38 |
| Shank Diameter Tolerance | h6 |
| UNSPSC Code | 27112803 |
| Mill Diameter (Fractional Inch) | 1 |
| Flute Type | Spiral |
| Number Of Flutes | 6 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 1 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Corner Radius (Decimal Inch) | 0.0900 |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 1 |
| Shank Type | Straight |
| Length Type | Stub |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 35/38 |
| Shank Diameter Tolerance | h6 |
| UNSPSC Code | 27112803 |
| MSC Part # | 56542699 |
| Mfr Part # | 3941L.100090 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$399.65
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 5/8; Flute Type: Chipbreaker; Number Of Flutes: 5; End Mill Material: Solid Carbide; Length of Cut (Inch): 1-7/8; Coating/Finish: EXO
Item #: 41196544
Brand: OSG
Model #: VGM5-2189
Product Specifications
| Mill Diameter (Fractional Inch) | 5/8 |
| Flute Type | Chipbreaker |
| Number Of Flutes | 5 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 1-7/8 |
| Coating/Finish | EXO |
| Centercutting | Yes |
| End Type | Square |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 5/8 |
| Mill Diameter (Decimal Inch) | 0.6250 |
| Length of Cut (Decimal Inch) | 1.8750 |
| Shank Type | Straight-Cylindrical |
| Length Type | Regular |
| Shank Diameter (Decimal Inch) | 0.6250 |
| Chipbreaker | Yes |
| Variable Helix | No |
| Variable Index | Yes |
| Helix Angle | 40 |
| Cutting Direction | Right Hand |
| Series | VGM5-NIK |
| Mill Diameter Tolerance | +0 / -0.0015 |
| UNSPSC Code | 27112803 |
$185.99
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 1/2" Dia, 3" LOC, 2 Flute, Solid Carbide
Item #: 66015991
Brand: Cleveland
Model #: C81059
Product Specifications
| Mill Diameter (mm) | 12.70 |
| Mill Diameter (Decimal Inch) | 0.5000 |
| Mill Diameter (Inch) | 1/2 |
| Number Of Flutes | 2 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 3.0000 |
| Length of Cut (Inch) | 3 |
| Length of Cut (mm) | 76.20 |
| Shank Diameter (mm) | 12.70 |
| Shank Diameter (Inch) | 1/2 |
| Shank Diameter (Decimal Inch) | 0.5000 |
| Overall Length (mm) | 152.40 |
| Overall Length (Decimal Inch) | 6.0000 |
| Overall Length (Inch) | 6 |
| Single Or Double End | Single |
| Coating/Finish Family | TiAlN |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 30 |
| Primary Workpiece Material | High-Temp Alloy; Stainless Steel; Cast Iron; Steel |
| Primary Workpiece Material Code | P; S; K; M |
| Coating/Finish | TiAlN |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Straight |
| Material Grade | Sub Micrograin |
| Length Type | Extra Long |
| Series | CEM-SE-2-TA |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
| Mill Diameter (mm) | 12.70 |
| Mill Diameter (Decimal Inch) | 0.5000 |
| Mill Diameter (Inch) | 1/2 |
| Number Of Flutes | 2 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 3.0000 |
| Length of Cut (Inch) | 3 |
| Length of Cut (mm) | 76.20 |
| Shank Diameter (mm) | 12.70 |
| Shank Diameter (Inch) | 1/2 |
| Shank Diameter (Decimal Inch) | 0.5000 |
| Overall Length (mm) | 152.40 |
| Overall Length (Decimal Inch) | 6.0000 |
| Overall Length (Inch) | 6 |
| Single Or Double End | Single |
| Coating/Finish Family | TiAlN |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 30 |
| Primary Workpiece Material | High-Temp Alloy; Stainless Steel; Cast Iron; Steel |
| Primary Workpiece Material Code | P; S; K; M |
| Coating/Finish | TiAlN |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Straight |
| Material Grade | Sub Micrograin |
| Length Type | Extra Long |
| Series | CEM-SE-2-TA |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
| MSC Part # | 66015991 |
| Mfr Part # | C81059 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$175.99
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 16.00 mm Dia, 36.00 mm LOC, 0.50 mm Radius, 3 Flute, Solid Carbide
Item #: 09995184
Brand: WNT
Model #: 5358316205
Product Specifications
| Mill Diameter (mm) | 16.00 |
| Number Of Flutes | 3 |
| Length of Cut (mm) | 36.0000 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | DLC |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.50 |
| Overall Length (mm) | 92.0000 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 16.0000 |
| Neck Diameter (mm) | 15.000 |
| UNSPSC Code | 27112803 |
$150.34
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Tapered End Mills; Mill Diameter (Decimal Inch): 0.1875; Length of Cut (Inch): 1-1/4; End Mill Material: Solid Carbide
Item #: 60278074
Brand: Titan USA
Model #: TC85015
Product Specifications
| Mill Diameter (Decimal Inch) | 0.1875 |
| Length of Cut (Inch) | 1-1/4 |
| End Mill Material | Solid Carbide |
| Overall Length (Decimal Inch) | 4.0000 |
| Overall Length (Inch) | 4 |
| Centercutting | Yes |
| Shank Diameter (Decimal Inch) | 0.5000 |
| Shank Diameter (Inch) | 1/2 |
| Helix Angle | 30 |
| Flute Direction | Right Hand |
| Series | General Purpose End Mills - Carbide - 3 Flute - Square - 30 deg Helix - Tapered |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.2500 |
| Coating/Finish | Bright/Uncoated |
| Number Of Flutes | 3 |
| UNSPSC Code | 27112803 |
| Mill Diameter (Decimal Inch) | 0.1875 |
| Length of Cut (Inch) | 1-1/4 |
| End Mill Material | Solid Carbide |
| Overall Length (Decimal Inch) | 4.0000 |
| Overall Length (Inch) | 4 |
| Centercutting | Yes |
| Shank Diameter (Decimal Inch) | 0.5000 |
| Shank Diameter (Inch) | 1/2 |
| Helix Angle | 30 |
| Flute Direction | Right Hand |
| Series | General Purpose End Mills - Carbide - 3 Flute - Square - 30 deg Helix - Tapered |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.2500 |
| Coating/Finish | Bright/Uncoated |
| Number Of Flutes | 3 |
| UNSPSC Code | 27112803 |
| MSC Part # | 60278074 |
| Mfr Part # | TC85015 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$79.84
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 1" Dia, 1-1/2" LOC, 3.17 mm Radius, 4 Flute, Solid Carbide
Item #: 65100679
Brand: Cleveland
Model #: C80088
Product Specifications
| Mill Diameter (Inch) | 1 |
| Mill Diameter (Decimal Inch) | 1.0000 |
| Mill Diameter (mm) | 25.40 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 38.10 |
| Length of Cut (Inch) | 1-1/2 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Chipbreaker | No |
| Coating/Finish | AP/MAX |
| Overall Length (Inch) | 4 |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.1250 |
| Variable Index | Yes |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 3.17 |
| Overall Length (mm) | 101.60 |
| Coolant Through | No |
| Overall Length (Decimal Inch) | 4.0000 |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.5000 |
| Length Type | Stub |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Finishing |
| Shank Diameter (Decimal Inch) | 1.0000 |
| Shank Diameter (Inch) | 1 |
| Shank Diameter (mm) | 25.40 |
| Primary Workpiece Material | High-Temperature Alloy; Stainless Steel; Steel |
| UNSPSC Code | 27112803 |
| Primary Workpiece Material Code | P; S; M |
| Secondary Workpiece Material | Hard Material |
| Secondary Workpiece Material Code | H |
| Material Grade | Submicron |
| Series | CEM-V-4R-TA |
| Mill Diameter (Inch) | 1 |
| Mill Diameter (Decimal Inch) | 1.0000 |
| Mill Diameter (mm) | 25.40 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 38.10 |
| Length of Cut (Inch) | 1-1/2 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Chipbreaker | No |
| Coating/Finish | AP/MAX |
| Overall Length (Inch) | 4 |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.1250 |
| Variable Index | Yes |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 3.17 |
| Overall Length (mm) | 101.60 |
| Coolant Through | No |
| Overall Length (Decimal Inch) | 4.0000 |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.5000 |
| Length Type | Stub |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Finishing |
| Shank Diameter (Decimal Inch) | 1.0000 |
| Shank Diameter (Inch) | 1 |
| Shank Diameter (mm) | 25.40 |
| Primary Workpiece Material | High-Temperature Alloy; Stainless Steel; Steel |
| UNSPSC Code | 27112803 |
| Primary Workpiece Material Code | P; S; M |
| Secondary Workpiece Material | Hard Material |
| Secondary Workpiece Material Code | H |
| Material Grade | Submicron |
| Series | CEM-V-4R-TA |
| MSC Part # | 65100679 |
| Mfr Part # | C80088 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$458.34
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 1/4" Dia, 1-1/4" LOC, 3 Flute, Solid Carbide
Item #: 17647686
Brand: OSG
Model #: 86300609
Product Specifications
| Mill Diameter (Decimal Inch) | 0.2500 |
| Mill Diameter (Inch) | 1/4 |
| Number Of Flutes | 3 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 1.2500 |
| Length of Cut (Inch) | 1-1/4 |
| Shank Diameter (Inch) | 1/4 |
| Shank Diameter (Decimal Inch) | 0.2500 |
| Overall Length (Decimal Inch) | 3.0000 |
| Overall Length (Inch) | 3 |
| Single Or Double End | Single |
| Coating/Finish Family | DLC |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 40 |
| Primary Workpiece Material | Aluminum & Non-Ferrous |
| Primary Workpiece Material Code | N |
| Coating/Finish | DLC |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Material Grade | Micrograin |
| Series | 8630 |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
$43.98
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 3/16" Dia, 5/8" LOC, 2 Flute, Solid Carbide
Item #: 60205283
Brand: Titan USA
Model #: TC30701
Product Specifications
| Mill Diameter (Decimal Inch) | 0.1875 |
| Mill Diameter (Inch) | 3/16 |
| Number Of Flutes | 2 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.6250 |
| Length of Cut (Inch) | 5/8 |
| Shank Diameter (Inch) | 3/16 |
| Shank Diameter (Decimal Inch) | 0.1875 |
| Overall Length (Decimal Inch) | 2.0000 |
| Overall Length (Inch) | 2 |
| Single Or Double End | Single |
| Coating/Finish Family | Bright/Uncoated |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 0 |
| Primary Workpiece Material | High-Temp Alloy; Stainless Steel; Steel |
| Primary Workpiece Material Code | P; S; M |
| Coating/Finish | Bright/Uncoated |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Straight |
| Material Grade | Solid Carbide |
| Series | General Purpose End Mills - Carbide - 2 Flute - Square - Straight Flute |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
| Mill Diameter (Decimal Inch) | 0.1875 |
| Mill Diameter (Inch) | 3/16 |
| Number Of Flutes | 2 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.6250 |
| Length of Cut (Inch) | 5/8 |
| Shank Diameter (Inch) | 3/16 |
| Shank Diameter (Decimal Inch) | 0.1875 |
| Overall Length (Decimal Inch) | 2.0000 |
| Overall Length (Inch) | 2 |
| Single Or Double End | Single |
| Coating/Finish Family | Bright/Uncoated |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 0 |
| Primary Workpiece Material | High-Temp Alloy; Stainless Steel; Steel |
| Primary Workpiece Material Code | P; S; M |
| Coating/Finish | Bright/Uncoated |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Straight |
| Material Grade | Solid Carbide |
| Series | General Purpose End Mills - Carbide - 2 Flute - Square - Straight Flute |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
| MSC Part # | 60205283 |
| Mfr Part # | TC30701 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$12.92
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 0.0300" Dia, 0.0450" LOC, 3 Flute, Solid Carbide
Item #: 39412978
Brand: Harvey Tool
Model #: 982130
Product Specifications
| Mill Diameter (Decimal Inch) | 0.0300 |
| Number Of Flutes | 3 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.0450 |
| Shank Diameter (Inch) | 1/8 |
| Shank Diameter (Decimal Inch) | 0.1250 |
| Overall Length (Decimal Inch) | 2.5000 |
| Overall Length (Inch) | 2-1/2 |
| Single Or Double End | Single |
| Coating/Finish Family | Bright/Uncoated |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | Yes |
| Coolant Through | No |
| Helix Angle | 30 |
| Primary Workpiece Material | Aluminum & Non-Ferrous; Stainless Steel; Cast Iron; CFRP Materials; Steel |
| Primary Workpiece Material Code | P; C; K; M; N |
| Coating/Finish | Bright/Uncoated |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Reach Length (Inch) | 5/16 |
| Reach Length (Decimal Inch) | 0.3120 |
| Length Of Cut Range (Decimal Inch) | 0.0000 - 0.1000 |
| Series | Miniature End Mills - Square - Long Reach, Stub Flute |
| System Of Measurement | Decimal Inch |
| UNSPSC Code | 27112803 |
$40.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 1" Dia, 3" LOC, 4 Flute, High Speed Steel
Item #: 67146233
Brand: Cleveland
Model #: C75075
Product Specifications
| Mill Diameter (mm) | 25.40 |
| Mill Diameter (Decimal Inch) | 1.0000 |
| Mill Diameter (Inch) | 1 |
| Number Of Flutes | 4 |
| End Mill Material | High Speed Steel |
| Length of Cut (Decimal Inch) | 3.0000 |
| Length of Cut (Inch) | 3 |
| Length of Cut (mm) | 76.20 |
| Shank Diameter (mm) | 25.40 |
| Shank Diameter (Inch) | 1 |
| Shank Diameter (Decimal Inch) | 1.0000 |
| Overall Length (mm) | 139.70 |
| Overall Length (Decimal Inch) | 5.5000 |
| Overall Length (Inch) | 5-1/2 |
| Single Or Double End | Single |
| Coating/Finish Family | TiCN |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 30 |
| Primary Workpiece Material | Aluminum & Non-Ferrous; Cast Iron; Steel |
| Primary Workpiece Material Code | P; K; N |
| Coating/Finish | TiCN |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Weldon Flat |
| Material Grade | High-Speed Steel |
| Length Type | Regular |
| Series | HG-4C-TC |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
| Mill Diameter (mm) | 25.40 |
| Mill Diameter (Decimal Inch) | 1.0000 |
| Mill Diameter (Inch) | 1 |
| Number Of Flutes | 4 |
| End Mill Material | High Speed Steel |
| Length of Cut (Decimal Inch) | 3.0000 |
| Length of Cut (Inch) | 3 |
| Length of Cut (mm) | 76.20 |
| Shank Diameter (mm) | 25.40 |
| Shank Diameter (Inch) | 1 |
| Shank Diameter (Decimal Inch) | 1.0000 |
| Overall Length (mm) | 139.70 |
| Overall Length (Decimal Inch) | 5.5000 |
| Overall Length (Inch) | 5-1/2 |
| Single Or Double End | Single |
| Coating/Finish Family | TiCN |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 30 |
| Primary Workpiece Material | Aluminum & Non-Ferrous; Cast Iron; Steel |
| Primary Workpiece Material Code | P; K; N |
| Coating/Finish | TiCN |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Weldon Flat |
| Material Grade | High-Speed Steel |
| Length Type | Regular |
| Series | HG-4C-TC |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
| MSC Part # | 67146233 |
| Mfr Part # | C75075 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$186.08
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 3/4" Dia, 1-1/2" LOC, 5 Flute, Solid Carbide
Item #: 67133157
Brand: Cleveland
Model #: C60590
Product Specifications
| Mill Diameter (mm) | 19.05 |
| Mill Diameter (Decimal Inch) | 0.7500 |
| Mill Diameter (Inch) | 3/4 |
| Number Of Flutes | 5 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 1.5000 |
| Length of Cut (Inch) | 1-1/2 |
| Length of Cut (mm) | 38.10 |
| Shank Diameter (mm) | 19.05 |
| Shank Diameter (Inch) | 3/4 |
| Shank Diameter (Decimal Inch) | 0.7500 |
| Overall Length (mm) | 101.60 |
| Overall Length (Decimal Inch) | 4.0000 |
| Overall Length (Inch) | 4 |
| Single Or Double End | Single |
| Coating/Finish Family | Bright/Uncoated |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 38 |
| Primary Workpiece Material | Stainless Steel; Cast Iron; Steel |
| Primary Workpiece Material Code | P; K; M |
| Coating/Finish | Bright/Uncoated |
| Variable Helix | No |
| Variable Index | Yes |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Straight |
| Material Grade | Sub Micrograin |
| Length Type | Regular |
| Series | CEM-V2-5R |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
| Mill Diameter (mm) | 19.05 |
| Mill Diameter (Decimal Inch) | 0.7500 |
| Mill Diameter (Inch) | 3/4 |
| Number Of Flutes | 5 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 1.5000 |
| Length of Cut (Inch) | 1-1/2 |
| Length of Cut (mm) | 38.10 |
| Shank Diameter (mm) | 19.05 |
| Shank Diameter (Inch) | 3/4 |
| Shank Diameter (Decimal Inch) | 0.7500 |
| Overall Length (mm) | 101.60 |
| Overall Length (Decimal Inch) | 4.0000 |
| Overall Length (Inch) | 4 |
| Single Or Double End | Single |
| Coating/Finish Family | Bright/Uncoated |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 38 |
| Primary Workpiece Material | Stainless Steel; Cast Iron; Steel |
| Primary Workpiece Material Code | P; K; M |
| Coating/Finish | Bright/Uncoated |
| Variable Helix | No |
| Variable Index | Yes |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Straight |
| Material Grade | Sub Micrograin |
| Length Type | Regular |
| Series | CEM-V2-5R |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
| MSC Part # | 67133157 |
| Mfr Part # | C60590 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$241.21
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 3/4" Dia, 1" LOC, 0.1200" Radius, 5 Flute, Solid Carbide
Item #: 09667049
Brand: Walter-Prototyp
Model #: 8417928
Product Specifications
| Mill Diameter (Inch) | 3/4 |
| Number Of Flutes | 5 |
| Length of Cut (Inch) | 1 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | nACo |
| Overall Length (Inch) | 6 |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.1200 |
| Cutting Direction | Right Hand |
| Coolant Through | No |
| Chipbreaker | No |
| Extended Reach | Yes |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Roughing & Finishing |
| Shank Diameter (Inch) | 3/4 |
| Reach Length (Decimal Inch) | 4.3071 |
| Shank Diameter Tolerance | h6 |
| Primary Workpiece Material | Superalloys & Titanium |
| UNSPSC Code | 27112803 |
| Primary Workpiece Material Code | S |
| Secondary Workpiece Material | Stainless Steel; Steel |
| Secondary Workpiece Material Code | P; M |
| Series | MA377.A-5-R-C |
| Proprietary Coating Designation | WJ30EM |
| Manufacturers Catalog Number | MA377.19.1A5L305D-WJ30EM |
$409.67
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 11/64" Dia, 4 Flute, Solid Carbide
Item #: 55273361
Brand: Internal Tool
Model #: 41-1721
Product Specifications
| Mill Diameter (Decimal Inch) | 0.1720 |
| Mill Diameter (Inch) | 11/64 |
| Number Of Flutes | 4 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.3800 |
| Shank Diameter (Inch) | 3/16 |
| Shank Diameter (Decimal Inch) | 0.1870 |
| Overall Length (Decimal Inch) | 2.0000 |
| Overall Length (Inch) | 2 |
| Single Or Double End | Single |
| Coating/Finish Family | Bright/Uncoated |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 30 |
| Primary Workpiece Material | Aluminum & Non-Ferrous; High-Temp Alloy; Stainless Steel; Cast Iron; Steel; Hardened Materials |
| Primary Workpiece Material Code | P; S; H; K; M; N |
| Coating/Finish | Bright/Uncoated |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Straight |
| Material Grade | Micrograin |
| Length Type | Regular |
| Mill Diameter Tolerance | +0.0000/-0.0020 in |
| Series | 41 |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
| Mill Diameter (Decimal Inch) | 0.1720 |
| Mill Diameter (Inch) | 11/64 |
| Number Of Flutes | 4 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.3800 |
| Shank Diameter (Inch) | 3/16 |
| Shank Diameter (Decimal Inch) | 0.1870 |
| Overall Length (Decimal Inch) | 2.0000 |
| Overall Length (Inch) | 2 |
| Single Or Double End | Single |
| Coating/Finish Family | Bright/Uncoated |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 30 |
| Primary Workpiece Material | Aluminum & Non-Ferrous; High-Temp Alloy; Stainless Steel; Cast Iron; Steel; Hardened Materials |
| Primary Workpiece Material Code | P; S; H; K; M; N |
| Coating/Finish | Bright/Uncoated |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Straight |
| Material Grade | Micrograin |
| Length Type | Regular |
| Mill Diameter Tolerance | +0.0000/-0.0020 in |
| Series | 41 |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
| MSC Part # | 55273361 |
| Mfr Part # | 41-1721 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$19.45
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill Head: 4 Flutes
Item #: 18722983
Brand: M.A. Ford
Model #: 27762516B
Product Specifications
| Number Of Flutes | 4 |
| End Mill Material | Solid Carbide |
| Flute Direction | Right Hand |
| Variable Index | Yes |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| End Type | Corner Radius |
| Flute Type | Helical |
| Minimum Helix Angle | 38 |
| Maximum Helix Angle | 41 |
| UNSPSC Code | 27112803 |
$194.67
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 1.50 mm Dia, 1.50 mm LOC, 30 deg Helix, Hardmax Coated, Corner Radius End, Centercutting Series HLRS
Item #: 09993692
Brand: US Union Tool
Model #: 2931517
Product Specifications
| Mill Diameter (mm) | 1.50 |
| Number Of Flutes | 2 |
| Length of Cut (mm) | 1.50 |
| End Mill Material | Solid Carbide |
| Coating/Finish | Hardmax |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.10 |
| Overall Length (mm) | 55 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.2500 |
| Length Type | Long |
| Extended Reach | Yes |
| Shank Diameter (mm) | 6 |
| Mill Diameter Tolerance | -0.015 |
| Shank Diameter Tolerance | -0.005 |
| UNSPSC Code | 27112803 |
| Material Grade | Super MG |
| Series | HLRS |
$71.38
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 1.20 mm Dia, 0.96 mm LOC, 30 deg Helix, Hardmax Coated, Corner Radius End, Centercutting Series HLRS
Item #: 09628991
Brand: US Union Tool
Model #: 2938035
Product Specifications
| Mill Diameter (mm) | 1.20 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 0.96 |
| End Mill Material | Solid Carbide |
| Coating/Finish | Hardmax |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.30 |
| Overall Length (mm) | 50 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.6250 |
| Length Type | Long |
| Extended Reach | Yes |
| Shank Diameter (mm) | 4.00 |
| Mill Diameter Tolerance | -0.015 |
| Shank Diameter Tolerance | -0.005 |
| UNSPSC Code | 27112803 |
| Material Grade | Super MG |
| Series | HLRS |
$85.65
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 1/2; Flute Type: Spiral; Number Of Flutes: 6; End Mill Material: Solid Carbide; Length of Cut (Inch): 2; Coating/Finish: AlCr
Item #: 57074551
Brand: Emuge
Model #: 3943L.050090
Product Specifications
| Mill Diameter (Fractional Inch) | 1/2 |
| Flute Type | Spiral |
| Number Of Flutes | 6 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 2 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Corner Radius (Decimal Inch) | 0.0900 |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 1/2 |
| Shank Type | Straight |
| Length Type | Extra Long |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 35/38 |
| Shank Diameter Tolerance | h6 |
| UNSPSC Code | 27112803 |
$154.27
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 1/64" Dia, 3 Flute, Solid Carbide
Item #: 60228251
Brand: Titan USA
Model #: TC30802
Product Specifications
| Mill Diameter (Decimal Inch) | 0.0150 |
| Mill Diameter (Inch) | 1/64 |
| Number Of Flutes | 3 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.0230 |
| Shank Diameter (Inch) | 1/8 |
| Shank Diameter (Decimal Inch) | 0.1250 |
| Overall Length (Decimal Inch) | 1.5000 |
| Overall Length (Inch) | 1-1/2 |
| Single Or Double End | Single |
| Coating/Finish Family | Bright/Uncoated |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 30 |
| Primary Workpiece Material | Aluminum & Non-Ferrous; High-Temp Alloy; Stainless Steel; Cast Iron; Steel |
| Primary Workpiece Material Code | P; S; K; M; N |
| Coating/Finish | Bright/Uncoated |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Material Grade | Solid Carbide |
| Series | Micro End Mills - 3 Flute - Square - 30 deg Helix - Stub & Regular Flute |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
| Mill Diameter (Decimal Inch) | 0.0150 |
| Mill Diameter (Inch) | 1/64 |
| Number Of Flutes | 3 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.0230 |
| Shank Diameter (Inch) | 1/8 |
| Shank Diameter (Decimal Inch) | 0.1250 |
| Overall Length (Decimal Inch) | 1.5000 |
| Overall Length (Inch) | 1-1/2 |
| Single Or Double End | Single |
| Coating/Finish Family | Bright/Uncoated |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 30 |
| Primary Workpiece Material | Aluminum & Non-Ferrous; High-Temp Alloy; Stainless Steel; Cast Iron; Steel |
| Primary Workpiece Material Code | P; S; K; M; N |
| Coating/Finish | Bright/Uncoated |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Material Grade | Solid Carbide |
| Series | Micro End Mills - 3 Flute - Square - 30 deg Helix - Stub & Regular Flute |
| System Of Measurement | Fractional Inch |
| UNSPSC Code | 27112803 |
| MSC Part # | 60228251 |
| Mfr Part # | TC30802 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$22.03
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 25.00 mm Dia, 63.0000 mm LOC, 4 Flute, Solid Carbide
Item #: 51375764
Brand: Walter-Prototyp
Model #: 8002072
Product Specifications
| Mill Diameter (mm) | 25.00 |
| Number Of Flutes | 4 |
| End Mill Material | Solid Carbide |
| Length of Cut (mm) | 63.0000 |
| Shank Diameter (mm) | 25.0000 |
| Overall Length (mm) | 121.0000 |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Helix Angle | 38 |
| Primary Workpiece Material | Steel |
| Primary Workpiece Material Code | P |
| Secondary Workpiece Material | Non-Ferrous Metal; Stainless Steel; Cast Iron; Super Alloys & Titanium |
| Secondary Workpiece Material Code | S; K; M; N |
| Coating/Finish | TiAlN/THL |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Weldon Flat |
| Material Grade | Solid Carbide |
| Length Type | Standard |
| Neck Diameter (mm) | 23.750 |
| Reach Length (mm) | 63.00 |
| Shank Diameter Tolerance | h5 |
| Series | MC230 |
| UNSPSC Code | 27112803 |
$386.10
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It