Abrasives > Points & Burrs (ET04) - (24662 Products)
Abrasives > Points & Burrs (ET04)
Atrax - 5/8" Cut Diam, 1/4" Shank Diam, Flame Head Double Cut Burr - Carbide, Radius End, 1-7/16" LOC, 3-3/16" OAL
Item #: 85288249
Brand: Atrax
Exact Tooling IR#: 04
Features and Benefits
Double cut burrs are designed with right and left hand flutes combined to produce smooth and fine finishes. They produce small chips and give excellent control of the burr and grinder. They can be used on steel, stainless steel, high temp alloys and cast iron.
| Product Specifications | |
|---|---|
| Head Shape | Flame |
| Industry Specification | SH-6 |
| Tooth Style | Double Cut |
| Cutting Diameter (Inch) | 5/8 |
| Shank Diameter (Inch) | 1/4 |
| Head Material | Carbide |
| End Style | Radius |
| Length of Cut (Inch) | 1-7/16 |
| Overall Length (Inch) | 3-3/16 |
$107.74
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Made in USA - 11mm Cut Diam, 0.2362" Shank Diam, Cylinder with End Cut Head Single Cut Burr - Carbide, 25mm LOC, 70mm OAL
Item #: 51991982
Brand: Made in USA
Exact Tooling IR#: 04
Features and Benefits
Single cut burrs are designed with right hand spiral flutes that are designed for rapid stock removal, leaving a rougher finish than double cut burrs. They can be used on steel, stainless steel, cast iron and non-ferrous materials.
| Product Specifications | |
|---|---|
| Head Shape | Cylinder w/End Cut |
| Industry Specification | SB-4MMSC |
| Tooth Style | Single Cut |
| Cutting Diameter (mm) | 11.00 |
| Shank Diameter (Decimal Inch) | 0.2362 |
| Head Material | Carbide |
| Coating | Uncoated |
| Head Coating | None |
| Length of Cut (mm) | 25.0 |
| Length of Cut (Decimal Inch) | 0.9843 |
| Maximum RPM (General) | 25000 |
| Overall Length (mm) | 70 |
$29.75
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Made in USA - 1/4" Cut Diam, 1/4" Shank Diam, Cylinder Head Double Cut Burr - Carbide, 5/8" LOC, 2" OAL
Item #: 51999282
Brand: Made in USA
Exact Tooling IR#: 04
Features and Benefits
Double cut burrs are designed with right and left hand flutes combined to produce smooth and fine finishes. They produce small chips and give excellent control of the burr and grinder. They can be used on steel, stainless steel, high temp alloys and cast iron.
| Product Specifications | |
|---|---|
| Head Shape | Cylinder |
| Industry Specification | 88C4XC |
| Tooth Style | Double Cut |
| Cutting Diameter (Inch) | 1/4 |
| Shank Diameter (Inch) | 1/4 |
| Head Material | Carbide |
| Coating | AlTiN |
| Head Coating | Aluminum Titanium Nitride |
| Length of Cut (Inch) | 5/8 |
| Length of Cut (Decimal Inch) | 5/8 |
| Overall Length (Inch) | 2 |
$25.49
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Made in USA - 6mm Cut Diam, 0.0925" Shank Diam, Tree with Radius Head Double Cut Burr - Carbide, 14mm LOC, 52mm OAL
Item #: 52000460
Brand: Made in USA
Exact Tooling IR#: 04
Features and Benefits
Double cut burrs are designed with right and left hand flutes combined to produce smooth and fine finishes. They produce small chips and give excellent control of the burr and grinder. They can be used on steel, stainless steel, high temp alloys and cast iron.
| Product Specifications | |
|---|---|
| Head Shape | Tree w/Radius |
| Industry Specification | 251XC060 |
| Tooth Style | Double Cut |
| Cutting Diameter (mm) | 6.00 |
| Shank Diameter (Decimal Inch) | 0.0925 |
| Head Material | Carbide |
| Coating | TiN |
| Head Coating | Titanium Nitride |
| Length of Cut (mm) | 14.0 |
| Length of Cut (Decimal Inch) | 0.5512 |
| Overall Length (mm) | 52 |
$27.63
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Made in USA - 1/2" Cut Diam, 1/4" Shank Diam, Tree Head Double Cut Burr - Carbide, 3/4" LOC, 2-1/2" OAL
Item #: 51936003
Brand: Made in USA
Exact Tooling IR#: 04
Features and Benefits
Double cut burrs are designed with right and left hand flutes combined to produce smooth and fine finishes. They produce small chips and give excellent control of the burr and grinder. They can be used on steel, stainless steel, high temp alloys and cast iron.
| Product Specifications | |
|---|---|
| Head Shape | Tree |
| Industry Specification | SG-13DC |
| Tooth Style | Double Cut |
| Cutting Diameter (Inch) | 1/2 |
| Shank Diameter (Inch) | 1/4 |
| Head Material | Carbide |
| Coating | ZrN |
| Head Coating | Zirconium Nitride |
| Length of Cut (Inch) | 3/4 |
| Length of Cut (Decimal Inch) | 3/4 |
| Maximum RPM (General) | 25000 |
| Overall Length (Inch) | 2-1/2 |
$36.33
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Made in USA - 1/4" Cut Diam, 1/4" Shank Diam, Cone Head Diamond Cut Burr - Carbide, 1/2" LOC, 6-3/4" OAL
Item #: 51930865
Brand: Made in USA
Exact Tooling IR#: 04
Features and Benefits
Diamond cut burrs are designed to effectively cut across pattern on heat treated and tough-to-machine alloy steels at high speeds. They crush chips into small pieces in ordor for greater control and a smoother operation.
| Product Specifications | |
|---|---|
| Head Shape | Cone |
| Industry Specification | SM-1L6DM |
| Tooth Style | Diamond Cut |
| Cutting Diameter (Inch) | 1/4 |
| Shank Diameter (Inch) | 1/4 |
| Head Material | Carbide |
| Coating | AlTiN |
| Head Coating | Aluminum Titanium Nitride |
| Length of Cut (Inch) | 1/2 |
| Length of Cut (Decimal Inch) | 1/2 |
| Overall Length (Inch) | 6-3/4 |
| Included Angle | 14 |
$35.39
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Made in USA - 6mm Cut Diam, 0.2362" Shank Diam, Cone Head Double Cut Burr - Carbide, 16mm LOC, 50mm OAL
Item #: 52001583
Brand: Made in USA
Exact Tooling IR#: 04
Features and Benefits
Double cut burrs are designed with right and left hand flutes combined to produce smooth and fine finishes. They produce small chips and give excellent control of the burr and grinder. They can be used on steel, stainless steel, high temp alloys and cast iron.
| Product Specifications | |
|---|---|
| Head Shape | Cone |
| Industry Specification | 88MD5 |
| Tooth Style | Double Cut |
| Cutting Diameter (mm) | 6.00 |
| Shank Diameter (Decimal Inch) | 0.2362 |
| Head Material | Carbide |
| Coating | AlTiN |
| Head Coating | Aluminum Titanium Nitride |
| Length of Cut (mm) | 16.0 |
| Length of Cut (Decimal Inch) | 0.6299 |
| Overall Length (mm) | 50 |
$25.49
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Made in USA - 3/4" Cut Diam, 1/4" Shank Diam, Cone Head Single Cut Burr - Carbide, 11/16" LOC, 2-7/16" OAL
Item #: 51983344
Brand: Made in USA
Exact Tooling IR#: 04
Features and Benefits
Single cut burrs are designed with right hand spiral flutes that are designed for rapid stock removal, leaving a rougher finish than double cut burrs. They can be used on steel, stainless steel, cast iron and non-ferrous materials.
| Product Specifications | |
|---|---|
| Head Shape | Cone |
| Industry Specification | SJ-7SC |
| Tooth Style | Single Cut |
| Cutting Diameter (Inch) | 3/4 |
| Shank Diameter (Inch) | 1/4 |
| Head Material | Carbide |
| Coating | Uncoated |
| Head Coating | None |
| Length of Cut (Inch) | 11/16 |
| Length of Cut (Decimal Inch) | 11/16 |
| Maximum RPM (General) | 20000 |
| Overall Length (Inch) | 2-7/16 |
| Included Angle | 60 |
$45.23
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Made in USA - 9.5mm Cut Diam, 0.2362" Shank Diam, Cylinder with End Cut Head Diamond Cut Burr - Carbide, 19mm LOC, 64mm OAL
Item #: 51923563
Brand: Made in USA
Exact Tooling IR#: 04
Features and Benefits
Diamond cut burrs are designed to effectively cut across pattern on heat treated and tough-to-machine alloy steels at high speeds. They crush chips into small pieces in ordor for greater control and a smoother operation.
| Product Specifications | |
|---|---|
| Head Shape | Cylinder w/End Cut |
| Industry Specification | SB-3MMDM |
| Tooth Style | Diamond Cut |
| Cutting Diameter (mm) | 9.50 |
| Shank Diameter (Decimal Inch) | 0.2362 |
| Head Material | Carbide |
| Coating | AlTiN |
| Head Coating | Aluminum Titanium Nitride |
| Length of Cut (mm) | 19.0 |
| Length of Cut (Decimal Inch) | 0.7480 |
| Overall Length (mm) | 64 |
$26.17
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Made in USA - 19mm Cut Diam, 0.2362" Shank Diam, Cone Head Chipbreaker Cut Burr - Carbide, 9.5mm LOC, 54.5mm OAL
Item #: 51994085
Brand: Made in USA
Exact Tooling IR#: 04
Features and Benefits
Chipbreaker cut burrs are designed to provide better control and reduce chipping. They are used on hard materials like steel and cast iron.
| Product Specifications | |
|---|---|
| Head Shape | Cone |
| Industry Specification | SK-7MMCB |
| Tooth Style | Chipbreaker Cut |
| Cutting Diameter (mm) | 19.00 |
| Shank Diameter (Decimal Inch) | 0.2362 |
| Head Material | Carbide |
| Coating | Uncoated |
| Head Coating | None |
| Length of Cut (mm) | 9.5 |
| Length of Cut (Decimal Inch) | 0.3740 |
| Overall Length (mm) | 55 |
| Included Angle | 90 |
$41.88
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SGS Pro - 1/2" Cut Diam, 1/4" Shank Diam, Cone Head Double Cut Burr - Tungsten Carbide, Point End, 1/2" LOC, 2-1/8" OAL
Item #: 41754417
Brand: SGS Pro
Exact Tooling IR#: 04
Features and Benefits
Double cut burrs are designed with right and left hand flutes combined to produce smooth and fine finishes. They produce small chips and give excellent control of the burr and grinder. They can be used on steel, stainless steel, high temp alloys and cast iron.
| Product Specifications | |
|---|---|
| Head Shape | Cone |
| Industry Specification | SM-5G |
| Tooth Style | Double Cut |
| Cutting Diameter (Inch) | 1/2 |
| Shank Diameter (Inch) | 1/4 |
| Head Material | Tungsten Carbide |
| Coating | AlTiN |
| Head Coating | Titanium Aluminum Nitride |
| End Style | Point |
| Length of Cut (Inch) | 1/2 |
| Maximum RPM | 55000 |
| Maximum RPM (General) | 55000 |
| Overall Length (Inch) | 2-1/8 |
$52.47
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Made in USA - 1/2" Cut Diam, 0.2362" Shank Diam, Cylinder Head Chipbreaker Cut Burr - Carbide, 25mm LOC, 70mm OAL
Item #: 44484491
Brand: Made in USA
Exact Tooling IR#: 04
Features and Benefits
Chipbreaker cut burrs are designed to provide better control and reduce chipping. They are used on hard materials like steel and cast iron.
| Product Specifications | |
|---|---|
| Head Shape | Cylinder |
| Industry Specification | SA-5MMCB |
| Tooth Style | Chipbreaker Cut |
| Cutting Diameter (Inch) | 1/2 |
| Shank Diameter (Decimal Inch) | 0.2362 |
| Head Material | Carbide |
| Coating | ZrN |
| Head Coating | Zirconium Nitride |
| Length of Cut (mm) | 25.0 |
| Length of Cut (Decimal Inch) | 0.9843 |
| Overall Length (mm) | 70 |
$41.83
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Made in USA - 1/2" Cut Diam, 1/4" Shank Diam, Tree with Radius Head Double Cut Burr - Carbide, 3/4" LOC, 2-1/2" OAL
Item #: 51948651
Brand: Made in USA
Exact Tooling IR#: 04
Features and Benefits
Double cut burrs are designed with right and left hand flutes combined to produce smooth and fine finishes. They produce small chips and give excellent control of the burr and grinder. They can be used on steel, stainless steel, high temp alloys and cast iron.
| Product Specifications | |
|---|---|
| Head Shape | Tree w/Radius |
| Industry Specification | SF-13DC |
| Tooth Style | Double Cut |
| Cutting Diameter (Inch) | 1/2 |
| Shank Diameter (Inch) | 1/4 |
| Head Material | Carbide |
| Coating | ZrN |
| Head Coating | Zirconium Nitride |
| Length of Cut (Inch) | 3/4 |
| Length of Cut (Decimal Inch) | 3/4 |
| Maximum RPM (General) | 25000 |
| Overall Length (Inch) | 2-1/2 |
$36.33
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
M.A. Ford - 1/4" Cut Diam, 1/8" Shank Diam, Cylinder with End Cut Head Double Cut Burr - Carbide, End Cut End, 3/16" LOC, 1-11/16" OAL
Item #: 58267683
Brand: M.A. Ford
Exact Tooling IR#: 04
Features and Benefits
Double cut burrs are designed with right and left hand flutes combined to produce smooth and fine finishes. They produce small chips and give excellent control of the burr and grinder. They can be used on steel, stainless steel, high temp alloys and cast iron.
| Product Specifications | |
|---|---|
| Head Shape | Cylinder w/End Cut |
| Industry Specification | SB-51-D |
| Tooth Style | Double Cut |
| Cutting Diameter (Inch) | 1/4 |
| Shank Diameter (Inch) | 1/8 |
| Head Material | Carbide |
| Coating | Uncoated |
| End Style | End Cut |
| Length of Cut (Inch) | 3/16 |
| Overall Length (Inch) | 1-11/16 |
$25.80
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SGS Pro - 1/2" Cut Diam, 1/4" Shank Diam, Cone Head Double Cut Burr - Tungsten Carbide, Point End, 1/2" LOC, 2-1/8" OAL
Item #: 41754425
Brand: SGS Pro
Exact Tooling IR#: 04
Features and Benefits
Double cut burrs are designed with right and left hand flutes combined to produce smooth and fine finishes. They produce small chips and give excellent control of the burr and grinder. They can be used on steel, stainless steel, high temp alloys and cast iron.
| Product Specifications | |
|---|---|
| Head Shape | Cone |
| Industry Specification | SM-5G |
| Tooth Style | Double Cut |
| Cutting Diameter (Inch) | 1/2 |
| Shank Diameter (Inch) | 1/4 |
| Head Material | Tungsten Carbide |
| Coating | Uncoated |
| Head Coating | None |
| End Style | Point |
| Length of Cut (Inch) | 1/2 |
| Maximum RPM | 55000 |
| Maximum RPM (General) | 55000 |
| Overall Length (Inch) | 2-1/8 |
$46.84
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Made in USA - 16mm Cut Diam, 0.2362" Shank Diam, Cone Head Aluma Cut Burr - Carbide, 8mm LOC, 53mm OAL
Item #: 51991149
Brand: Made in USA
Exact Tooling IR#: 04
Features and Benefits
Aluma cut burrs finish on aluminum, plastics, rubber steel and soft materials at high speeds. They are designed for minimal chip removal.
| Product Specifications | |
|---|---|
| Head Shape | Cone |
| Industry Specification | SK-6MMFM |
| Tooth Style | Aluma Cut |
| Cutting Diameter (mm) | 16.00 |
| Shank Diameter (Decimal Inch) | 0.2362 |
| Head Material | Carbide |
| Coating | Uncoated |
| Head Coating | None |
| Length of Cut (mm) | 8.0 |
| Length of Cut (Decimal Inch) | 0.3150 |
| Maximum RPM (General) | 20000 |
| Overall Length (mm) | 53 |
| Included Angle | 90 |
$40.19
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Made in USA - 9.5mm Cut Diam, 0.2362" Shank Diam, Inverted Cone Head Chipbreaker Cut Burr - Carbide, 9.5mm LOC, 54.5mm OAL
Item #: 51920080
Brand: Made in USA
Exact Tooling IR#: 04
Features and Benefits
Chipbreaker cut burrs are designed to provide better control and reduce chipping. They are used on hard materials like steel and cast iron.
| Product Specifications | |
|---|---|
| Head Shape | Inverted Cone |
| Industry Specification | SN-2MMCB |
| Tooth Style | Chipbreaker Cut |
| Cutting Diameter (mm) | 9.50 |
| Shank Diameter (Decimal Inch) | 0.2362 |
| Head Material | Carbide |
| Coating | ZrN |
| Head Coating | Zirconium Nitride |
| Length of Cut (mm) | 9.5 |
| Length of Cut (Decimal Inch) | 0.3740 |
| Overall Length (mm) | 55 |
| Included Angle | 13 |
$32.94
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Made in USA - 9.5mm Cut Diam, 0.2362" Shank Diam, Cone Head Aluma Cut Burr - Carbide, 27mm LOC, 72mm OAL
Item #: 51958569
Brand: Made in USA
Exact Tooling IR#: 04
Features and Benefits
Aluma cut burrs finish on aluminum, plastics, rubber steel and soft materials at high speeds. They are designed for minimal chip removal.
| Product Specifications | |
|---|---|
| Head Shape | Cone |
| Industry Specification | SL-3MMFM |
| Tooth Style | Aluma Cut |
| Cutting Diameter (mm) | 9.50 |
| Shank Diameter (Decimal Inch) | 0.2362 |
| Head Material | Carbide |
| Coating | ZrN |
| Head Coating | Zirconium Nitride |
| Length of Cut (mm) | 27.0 |
| Length of Cut (Decimal Inch) | 1.0630 |
| Overall Length (mm) | 72 |
| Included Angle | 14 |
$41.88
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Made in USA - 1/2" Cut Diam, 1/4" Shank Diam, Inverted Cone Head Diamond Cut Burr - Carbide, 1/2" LOC, 2-1/4" OAL
Item #: 51987444
Brand: Made in USA
Exact Tooling IR#: 04
Features and Benefits
Diamond cut burrs are designed to effectively cut across pattern on heat treated and tough-to-machine alloy steels at high speeds. They crush chips into small pieces in ordor for greater control and a smoother operation.
| Product Specifications | |
|---|---|
| Head Shape | Inverted Cone |
| Industry Specification | SN-4DM |
| Tooth Style | Diamond Cut |
| Cutting Diameter (Inch) | 1/2 |
| Shank Diameter (Inch) | 1/4 |
| Head Material | Carbide |
| Coating | Uncoated |
| Head Coating | None |
| Length of Cut (Inch) | 1/2 |
| Length of Cut (Decimal Inch) | 1/2 |
| Maximum RPM (General) | 25000 |
| Overall Length (Inch) | 2-1/4 |
| Included Angle | 28 |
$32.09
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Made in USA - 1/2" Cut Diam, 1/4" Shank Diam, Tree Head Single Cut Burr - Carbide, 3/4" LOC, 2-1/2" OAL
Item #: 51935443
Brand: Made in USA
Exact Tooling IR#: 04
Features and Benefits
Single cut burrs are designed with right hand spiral flutes that are designed for rapid stock removal, leaving a rougher finish than double cut burrs. They can be used on steel, stainless steel, cast iron and non-ferrous materials.
| Product Specifications | |
|---|---|
| Head Shape | Tree |
| Industry Specification | SG-13SC |
| Tooth Style | Single Cut |
| Cutting Diameter (Inch) | 1/2 |
| Shank Diameter (Inch) | 1/4 |
| Head Material | Carbide |
| Coating | ZrN |
| Head Coating | Zirconium Nitride |
| Length of Cut (Inch) | 3/4 |
| Length of Cut (Decimal Inch) | 3/4 |
| Maximum RPM (General) | 25000 |
| Overall Length (Inch) | 2-1/2 |
$40.19
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It