BES Up To 2022 $100-$250 Products - (25001 Products)
Proto® Tether-Ready 5 Piece Double Box Ratcheting Metric Wrench Set - 6 & 12 Point
Item #: KP4275615
Manufacturer: Proto
Mfg #: J1190MA-TT
Technical Specifications:
•Brand Name: Proto
•Finish: Full Polish
•Model Number: J1190MA-TT
•Number of Pieces: 5
•Point Size: 6 & 12
Description:
•Full polish finish provides corrosion resistance and easy-to-clean surfaces
•Shorter length for access to confined workspaces.
•The wrench self-aligns with the fastener.
•6-point box end allows for a large wrench to fastener contact area which helps prevent fastener rounding.
•12 point box end allows for fine indexing.
•Fits 4, 6 and 12 point fasteners.
Shipping Info:
•Actual Weight - 1.7200
•Dimensions - Height: 2.60 Length: 11.7 Width: 3.10
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CIMPERIAL® 1017 Undyed - 5 Gallon
Item #: LL5100835P
Manufacturer: Cimcool
Mfg #: 00835-P
Technical Specifications:
•Brand Name: Cimcool
•Hazard Code: HAZ58
•Size: 5 Gallon
Description:
Shipping Info:
•HAZ 58
•UPS Ground - No Additional Shipping Charges
•UPS Air-No Additional Shipping Charges
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 44.7000
•Dimensions - Height: 16.0 Length: 12.5 Width: 12.5
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
12 x 1 x 5" - 6SFIN Grade - Scotch-Brite™ Light Deburring Wheel
Item #: TM2301669
Manufacturer: 3M
Mfg #: 0004801101
Technical Specifications:
*Arbor Hole: 5
*Brand Name: 3M
*Face Width: 1
*Grit: 6SFIN
*Material: Silicon Carbide
*Maximum RPM: 3,000
*Size: 12
*Standard Pack: 1
*Trade Name: Scotch-Brite™
*Type: Light Deburring Wheel
Description:
*Scotch-Brite™ Light Deburring Wheel
*For finishing applications; can also be used for light deburring
*Produces a bright and consistent finish with tight scratch pattern
*Very soft and conformable
Shipping Info:
*Actual Weight - 2.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT40 IR08-100-EX base holder
Item #: SG814092608100A
Manufacturer: Prime Tool
Mfg #: T00BT40926
Technical Specifications:
*Base Coupling OD: 0.472 / 12mm
*Base Coupling Size: IR08
*Brand Name: Prime Tool
*Gage Length: 3.937 / 100mm
*Pull Stud Thread: M16 x 2
*Shank: BT40
*Weight: 2.40345 lbs
Description:
*Taper Angle Tolerace: AT3+
*Case Hardened: HRC 58±2
*Seat Runout: 0.003mm
*Balance: G6.3, 25,000 RPM
Shipping Info:
*Actual Weight - 2.4034
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT30 IR08-100-EX base holder
Item #: SG813092608100A
Manufacturer: Prime Tool
Mfg #: T00BT30926
Technical Specifications:
*Base Coupling OD: 0.472 / 12mm
*Base Coupling Size: IR08
*Brand Name: Prime Tool
*Gage Length: 3.937 / 100mm
*Pull Stud Thread: M12 x 1.75
*Shank: BT30
*Weight: 1.08045 lbs
Description:
*Taper Angle Tolerace: AT3+
*Case Hardened: HRC 58±2
*Seat Runout: 0.003mm
*Balance: G6.3, 25,000 RPM
Shipping Info:
*Actual Weight - 1.0804
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 IR08-4"-EX base holder
Item #: SG814092608102A
Manufacturer: Prime Tool
Mfg #: T00CA40926
Technical Specifications:
*Base Coupling OD: 0.472 / 12mm
*Base Coupling Size: IR08
*Brand Name: Prime Tool
*Gage Length: 4.00 / 101.6mm
*Pull Stud Thread: 5/8-11
*Shank: CAT40
*Weight: 2.27 lbs
Description:
*Taper Angle Tolerace: AT3+
*Case Hardened: HRC 58±2
*Seat Runout: 0.003mm
*Balance: G6.3, 25,000 RPM
Shipping Info:
*Actual Weight - 2.7000
*Dimensions - Height: 3.00 Length: 8.10 Width: 2.90
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT30 IR11-100-EX base holder
Item #: SG813092611100A
Manufacturer: Prime Tool
Mfg #: T00BT30926
Technical Specifications:
*Base Coupling OD: 0.748 / 19mm
*Base Coupling Size: IR11
*Brand Name: Prime Tool
*Gage Length: 3.937 / 100mm
*Pull Stud Thread: M12 x 1.75
*Shank: BT30
*Weight: 1.08045 lbs
Description:
*Taper Angle Tolerace: AT3+
*Case Hardened: HRC 58±2
*Seat Runout: 0.003mm
*Balance: G6.3, 25,000 RPM
Shipping Info:
*Actual Weight - 1.0804
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT40 IR11-100-EX base holder
Item #: SG814092611100A
Manufacturer: Prime Tool
Mfg #: T00BT40926
Technical Specifications:
*Base Coupling OD: 0.748 / 19mm
*Base Coupling Size: IR11
*Brand Name: Prime Tool
*Gage Length: 3.937 / 100mm
*Pull Stud Thread: M16 x 2
*Shank: BT40
*Weight: 2.27115 lbs
Description:
*Taper Angle Tolerace: AT3+
*Case Hardened: HRC 58±2
*Seat Runout: 0.003mm
*Balance: G6.3, 25,000 RPM
Shipping Info:
*Actual Weight - 2.2711
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 IR11-4"-EX base holder
Item #: SG814092611102A
Manufacturer: Prime Tool
Mfg #: T00CA40926
Technical Specifications:
*Base Coupling OD: 0.748 / 19mm
*Base Coupling Size: IR11
*Brand Name: Prime Tool
*Gage Length: 4.00 / 101.6mm
*Pull Stud Thread: 5/8-11
*Shank: CAT40
*Weight: 2.35935 lbs
Description:
*Taper Angle Tolerace: AT3+
*Case Hardened: HRC 58±2
*Seat Runout: 0.003mm
*Balance: G6.3, 25,000 RPM
Shipping Info:
*Actual Weight - 2.6000
*Dimensions - Height: 2.80 Length: 8.00 Width: 2.90
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
No. 7R Universal Parting Blade Tool Holder - Series CA
Item #: GG3040007R
Manufacturer: Aloris
Mfg #: CA-7R
Technical Specifications:
*Brand Name: Aloris
*Centerline Height: 1-1/16
*Cutting Tool Recess: 1/4
*Depth: 1/4
*Height: 2-1/8
*Maximum Cutting Tool Size: 7/8
*Series: CA
*Tool Holder Capacity: 7/8
Description:
*No. 7R Reversible Universal Parting Blade Tool Holder
*For bevel and T-type blades
*Enables you to cut-off close to chuck
*Absencse of vibration prevents breaking blades
*Advantage of rear cut-off use
Shipping Info:
*Actual Weight - 4.1250
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
No. 10 Knurling; Turning & Facing Toolholder - Series CA
Item #: GG3040010
Manufacturer: Aloris
Mfg #: CA-10
Technical Specifications:
*Brand Name: Aloris
*Centerline Height: 1-7/16
*Depth: 3-3/4
*Dimension E: 1
*Height: 2-1/2
*Maximum Cutting Tool Size: 3/4
*Series: CA
*Tool Holder Capacity: 1/2 to 1
Description:
*No. 10 Knurling, Turning & Facing Holder
*Supplied with a set of high speed precision ground and lapped medium diamond knurls
Shipping Info:
*Actual Weight - 4.3750
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1/4 x 4 - Air Hardening Flat Stock
Item #: LY561615
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: A-2
*Thick: 1/4
*Width: 4
Description:
*A-2 Air Hardening Ground Flat Stock 36" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - 10.3100
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-3/8 RHS / RHC HSS 118 Degree Split Point Silver & Deming Reduced Shank Drill - Black & Gold
Item #: CL70C17086
Brand: Cle-Line
Model #: C17086
| Product Specifications | |
|---|---|
| Tool Diameter | 1-3/8″ |
| Helix Angle | CW |
| Angle | 118 Degrees |
| Measurement Type | Inch |
| Coating | Black & Gold |
| Flute Count (NOF) | 2 |
| Shank Size (SS) | 1/2″ |
| Overall Length (OAL) | 6″ |
| Cutting Edge Material | HSS |
| Point Shape | Split |
| Decimal Equivalent | 2 |
| Shank Type | Reduced |
| Flute Length | 3-1/8″ |
| Tool Type | Drill |
| Flute Type | Spiral |
| Series/List # | 1877 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
AXMG45-2020-L12 5/8″ 2FL
Item #: CR1016866
Brand: Melin Tool Co
Model #: 16866
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Corner Radius (RE) | 0.01″ |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Tool Type | High Performance |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Decimal Equivalent | 0.625″ |
| Overall Length (OAL) | 6″ |
| Series/List # | AXMG45 |
| Cutting Edge Material | Carbide |
| Package Height | .98600 |
| Flute Count (NOF) | 2 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
19785 3/4X3/4X1-1/2X4
Item #: CR1019785
Brand: Melin Tool Co
Model #: 19785
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Point Angle (SIG) | 82 Degrees |
| Usable Length (LU) | 1-1/2″ |
| Cutting Edge Material | Carbide |
| Flute Count (NOF) | 4 |
| Style | General Purpose |
| Overall Length (OAL) | 4″ |
| Series/List # | CCMG-DP |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
19774 3/4X3/4X1-1/2X4
Item #: CR1019774
Brand: Melin Tool Co
Model #: 19774
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Point Angle (SIG) | 60 Degrees |
| Usable Length (LU) | 1-1/2″ |
| Cutting Edge Material | Carbide |
| Flute Count (NOF) | 4 |
| Style | General Purpose |
| Overall Length (OAL) | 4″ |
| Series/List # | CCMG-DP |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
16594 3/4X3/4X1-1/2X4
Item #: CR1016594
Brand: Melin Tool Co
Model #: 16594
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Point Angle (SIG) | 82 Degrees |
| Usable Length (LU) | 1-1/2″ |
| Cutting Edge Material | Carbide |
| Flute Count (NOF) | 2 |
| Style | General Purpose |
| Overall Length (OAL) | 4″ |
| Series/List # | AMG-DP |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
15703 5/8X5/8X3/4X6 2FL
Item #: CR1015703
Brand: Melin Tool Co
Model #: 15703
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Usable Length (LU) | 3/4″ |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Corner Radius (RE) | 0.01″ |
| Depth of Cut Maximum (APMX) | 3-3/8″ |
| Tool Type | High Performance |
| Overall Length (OAL) | 6″ |
| Decimal Equivalent | 0.625″ |
| Cutting Edge Material | Carbide |
| Series/List # | AXMG45 |
| Flute Count (NOF) | 2 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
11575 3/4X3/4X5/8X4
Item #: CR1011575
Brand: Melin Tool Co
Model #: 11575
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Point Angle (SIG) | 60 Degrees |
| Usable Length (LU) | 3/8″ |
| Cutting Edge Material | Carbide |
| Flute Count (NOF) | 2 |
| Style | General Purpose |
| Overall Length (OAL) | 4″ |
| Series/List # | CMG2 |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
11644 3/4X3/4X1-1/2X4
Item #: CR1011644
Brand: Melin Tool Co
Model #: 11644
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Point Angle (SIG) | 90 Degrees |
| Usable Length (LU) | 1-1/2″ |
| Cutting Edge Material | Carbide |
| Flute Count (NOF) | 4 |
| Style | General Purpose |
| Overall Length (OAL) | 4″ |
| Series/List # | CCMG-DP |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It