Fasteners > Nuts (ET04) - (5192 Products)
Brand: Rocky Mountain Twist / Part #: 953HS32ST
Item #: 96299508
Brand: Rocky Mountain Twist
Model #: 953HS32STProduct Specifications
Type
Stub
Drill Bit Size (Decimal Inch)
0.1160
Drill Bit Size (Wire)
#32
Drill Point Angle
135
Shank Type
Threaded
Tool Material
High Speed Steel
Point Type
Split
Overall Length (Decimal Inch)
0.5000
Cutting Direction
Right Hand
Flute Type
Spiral
Flute Length (Inch)
5/16
Series
P3
Maximum Drilling Depth (Decimal Inch)
0.3125
Shank Thread Size
1/4-28
Standards
NAS 965 Type B
Coolant Through
No
Flute By Diameter Ratio
2xD
Drill Bit Finish/Coating
Oxide
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8″-11 × 13/16″ Table Slot × 1 3/8″ Width T-Nut
Item #: SG5041483
Brand: Te-Co
Model #: 41483
| Product Specifications | |
|---|---|
| Type | Standard T-Slot Nut |
| Material | Case Hardened |
| Tap Type | Blind Tapped |
| Base Size | 13/16″ |
| Thread Size | 5/8″-11 |
| Overall Length | 1 1/2″ |
| Slot Width | 1-3/8″ |
| Flange Height | 9/16″ |
| Overall Height | 1″ |
| Table Slot | 13/16″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2X1-1/4X3 3FL 0.125CR EM
Item #: HS1048420
Brand: Helical Solutions
Model #: 48420
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Radius (RE) | 1/8″ |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Length Group | 2.5D |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.5″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 1.75″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.02″ Dia. × 0.03″ LOC × 1/8″ Shank Size × 2-1/2″ OAL, 4 Flute, Carbide, TiAlN, Ballnose Endmill
Item #: GE90803120C3
Brand: Harvey Tool
Model #: 803120-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.02″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.1″ |
| Depth of Cut Maximum (APMX) | 0.03″ |
| Corner Radius (RE) | 0.01″ |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | 5D |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | TiAlN |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3M DENT BALL PMMA/WAX 2FL CRN
Item #: ER4519841
Brand: EMUGE-FRANKEN
Model #: 2608R.300316
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3 mm |
| Application | | Roughing | Finishing | |
| Connection Diameter Machine Side (DCONMS) | 3 mm |
| Tool Type | PMMA/PEEK/Wax |
| Overall Length (OAL) | 38 mm |
| End Shape | Ball Nose |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | CrN |
| Decimal Equivalent | 0.1181″ |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Shank Type | HA |
| Series/List # | 2608R |
| Usable Length (LU) | 2.55 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Seco / Part #: 10124486
Item #: 40067134
Brand: Seco
Model #: 10124486Product Specifications
Screw Type
Insert Screw
Indexable Tool Type
Milling Cutter
Industry Standard Number
C55011-T15P
Thread Size (mm)
M5
Toolholder Style Compatibility
R217/220.82; R220.81
Hardware Compatibility
Insert Screw
Drive Type
Torx Plus
Head Type
Countersunk
Overall Length (Decimal Inch)
0.4130
Series
T15P
Tool Material
Steel
Torx Size
15IP
Head Size
1/4
Key/Driver Compatibility
15 IP
Point Type
Flat
Right Hand Thread Length (Decimal Inch)
0.2200
Tightening Torque
44.3
Insert Size
16
Insert Screw
C55011
Complete Insert Compatibility
SN.U1306; XO.X1605
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8″-11 × 3/4″ Table Slot × 1 1/4″ Width T-Nut
Item #: SG5041482
Brand: Te-Co
Model #: 41482
| Product Specifications | |
|---|---|
| Type | Standard T-Slot Nut |
| Material | Case Hardened |
| Tap Type | Blind Tapped |
| Base Size | 3/4″ |
| Thread Size | 5/8″-11 |
| Overall Length | 1 1/8″ |
| Slot Width | 1-1/4″ |
| Flange Height | 1/2″ |
| Overall Height | 3/4″ |
| Table Slot | 3/4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3″ Diameter × 10″ OAL, Carbon Steel, 85 Series-For Closed Holes
Item #: MJ7485C3000
Brand: Brush Research
Model #: 85C3000
| Product Specifications | |
|---|---|
| Type | 85 Series-For Closed Holes |
| Bristle Diameter | 0.012″ |
| Diameter | 3″ |
| Bore Diameter | 3″ |
| Stem Diameter | 0.292″ |
| Maximum RPM | 2,000 |
| Abrasive Material | Carbon Steel |
| Series | 85 Series-For Closed Holes |
| Overall Length | 10″ |
| Brush Diameter | 3″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2X1 5/8X4 7FL 0.060CR_A
Item #: HS1081981
Brand: Helical Solutions
Model #: 81981
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Radius (RE) | 0.06″ |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Length Group | 3D |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.5″ |
| Coating | APLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 7 |
| Shank Length (LS) | 2.375″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
T-Slot Nut - 1/2″-13 Thread Size, 3/4″ Table Slot
Item #: SG5041413
Brand: Te-Co
Model #: 41413
| Product Specifications | |
|---|---|
| Type | Standard T-Slot Nut |
| Base Size | 3/4″ |
| Tap Type | Blind Tapped |
| Overall Length | 1 1/4″ |
| Thread Size | 1/2″-13 |
| Flange Height | 15/32″ |
| Slot Width | 1-1/4″ |
| Table Slot | 3/4″ |
| Overall Height | 3/4″ |
| Metric Table Slot | 20 mm |
| Material | Case Hardened |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4″-10 × 13/16″ Table Slot × 1 3/8″ Width T-Nut
Item #: SG5041484
Brand: Te-Co
Model #: 41484
| Product Specifications | |
|---|---|
| Type | Standard T-Slot Nut |
| Material | Case Hardened |
| Tap Type | Blind Tapped |
| Base Size | 13/16″ |
| Thread Size | 3/4″-10 |
| Overall Length | 1 1/2″ |
| Slot Width | 1-3/8″ |
| Flange Height | 9/16″ |
| Overall Height | 1″ |
| Table Slot | 13/16″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
2-25/32″ × 7/16″ × 1″ - HSS- Staggered Tooth Keyseat Cutter - 16T - TiAlN
Item #: KE10952002606
Brand: Keo
Model #: 952-002-606
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 2-25/32″ |
| Coating | TiAlN |
| Cutting Width (CW) | 7/16″ |
| Cutting Direction (HAND) | Neutral |
| Hub Diameter (DHUB) | 1.438″ |
| Cutting Edge Material | HSS |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Flute Type | Staggered |
| Number of Teeth | 16 |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Micro 100 / Part #: 40221
Item #: 85903730
Brand: Micro 100
Model #: 40221Product Specifications
Coolant Hose Fitting Type
Plug
Connection Type
Male to Female
System Size
0.750 in
Body Material
Brass
Thread Standard
NPT
Thread Size
3/8-18 NPT
Connection Style
Threaded
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
T-Slot Nut - M16-2.00 Thread Size, 18 mm Table Slot
Item #: SG5061409
Brand: Te-Co
Model #: 61409
| Product Specifications | |
|---|---|
| Type | Standard T-Slot Nut |
| Base Size | 3/4″ |
| Tap Type | Blind Tapped |
| Overall Length | 32 mm |
| Thread Size | M16-2.00 |
| Flange Height | 11 mm |
| Slot Width | 29 mm |
| Table Slot | 3/4″ |
| Overall Height | 19 mm |
| Metric Table Slot | 18 mm |
| Material | Case Hardened |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/8X1 T-SLOT NUT TE-CO
Item #: SG5041423
Brand: Te-Co
Model #: 41423
| Product Specifications | |
|---|---|
| Type | Standard T-Slot Nut |
| Base Size | 1″ |
| Tap Type | Blind Tapped |
| Overall Length | 1 3/4″ |
| Thread Size | 7/8″-9 |
| Flange Height | 5/8″ |
| Slot Width | 1-5/8″ |
| Table Slot | 1″ |
| Overall Height | 1″ |
| Metric Table Slot | 26 mm |
| Material | Case Hardened |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Swivel Flange Nut - 5/8″-11 Thread Size
Item #: SG5042005
Brand: Te-Co
Model #: 42005
| Product Specifications | |
|---|---|
| Type | Swivel Flange Nut |
| Flange Diameter | 1 3/8″ |
| Thread Size | 5/8″-11 |
| Overall Height | 29/32″ |
| Material | Steel |
| Washer Thickness | 1/4″ |
| Material Grade | 12L14 |
| Width Across Flats | 1 1/16″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
16″ Bore Diameter × 12″ Hone Length × 34″ Overall Length, 1000/1200 Grit, Levigated Alumina - Heavy Duty Flex-Hone
Item #: MJ73GBD1600LA
Brand: Brush Research
Model #: GBD1600LA
| Product Specifications | |
|---|---|
| Type | Heavy Duty Flex-Hone |
| Hone Length | 12″ |
| Abrasive Material | Levigated Alumina |
| Overall Length | 34″ |
| Grit | 1000/1200 |
| Specification | Final Polish |
| Bore Diameter | 16″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Swivel Flange Nut - 1/2″-13 Thread Size
Item #: SG5042004
Brand: Te-Co
Model #: 42004
| Product Specifications | |
|---|---|
| Type | Swivel Flange Nut |
| Flange Diameter | 1 1/8″ |
| Thread Size | 1/2″-13 |
| Overall Height | 23/32″ |
| Material | Steel |
| Washer Thickness | 7/32″ |
| Material Grade | 12L14 |
| Width Across Flats | 7/8″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
T-Slot Nut - 3/4″-10 Thread Size, 1″ Table Slot
Item #: SG5041421
Brand: Te-Co
Model #: 41421
| Product Specifications | |
|---|---|
| Type | Standard T-Slot Nut |
| Base Size | 1″ |
| Tap Type | Blind Tapped |
| Overall Length | 1 3/4″ |
| Thread Size | 3/4″-10 |
| Flange Height | 3/4″ |
| Slot Width | 1-3/4″ |
| Table Slot | 1″ |
| Overall Height | 1-1/2″ |
| Metric Table Slot | 26 mm |
| Material | Case Hardened |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
T-Slot Nut - 3/4″-10 Thread Size, 1″ Table Slot
Item #: SG5041420
Brand: Te-Co
Model #: 41420
| Product Specifications | |
|---|---|
| Type | Standard T-Slot Nut |
| Base Size | 1″ |
| Tap Type | Blind Tapped |
| Overall Length | 1 3/4″ |
| Thread Size | 3/4″-10 |
| Flange Height | 5/8″ |
| Slot Width | 1-5/8″ |
| Table Slot | 1″ |
| Overall Height | 1″ |
| Metric Table Slot | 26 mm |
| Material | Case Hardened |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It