‎.058-2FL-SE-REG-AlTiN

Item #: MW21250200630B
Brand: Monster Tool Company
Model #: 250-200630B

Product Specifications
Cutting Diameter (DC)	0.058″
Applicable Material	\| Stainless Steel \| Cast Iron \|
Connection Diameter Machine Side (DCONMS)	1/8″
Application	\| Slotting \| Profiling \| Plunging \|
Depth of Cut Maximum (APMX)	0.174″
Grade	C-2 Sub-Micron
Overall Length (OAL)	‎1-1/2″
Length Group	Regular
Cutting Edge Material	Solid Tungsten Carbide
Decimal Equivalent	0.058″
Coating	AlTiN
Series/List #	250
Flute Count (NOF)	2
Cutting Direction (HAND)	Right Hand
Flute Helix Angle (FHA)	30 Degrees
Single / Double End	Single End
End Shape	Square
Center Cutting	Yes

$23.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

.0877 ST FL RHC REAMER

Item #: MW205000000877
Brand: Monster Tool Company
Model #: 500-0000877

Product Specifications
Cutting Diameter (DC)	0.0877″
Coating	Bright
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \| Aluminum / Non-Ferrous Materials \|
Cutting Edge Material	Solid Tungsten Carbide
Usable Length (LU)	1/2″
Measurement Type	Inch
Cutting Edge Length (L)	1/2″
Series/List #	500
Connection Diameter Machine Side (DCONMS)	0.0877″
Tool Type	Reamer
Flute Count (NOF)	4
Decimal Equivalent	0.0877″
Overall Length (OAL)	2″
End Shape	45° Chamfered End
Neck Length (LN)	3/8″
Cutting Diameter Tolerance	‎+0.0002 / -0.0000
Cutting Direction (HAND)	Right Hand
Single / Double End	Single End
Grade	C-2 Sub-Micron
Length Group	Regular

$38.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

.3034 ST FL RHC REAMER

Item #: MW205000003034
Brand: Monster Tool Company
Model #: 500-0003034

Product Specifications
Cutting Diameter (DC)	0.3034″
Coating	Bright
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \| Aluminum / Non-Ferrous Materials \|
Cutting Edge Material	Solid Tungsten Carbide
Usable Length (LU)	‎1-1/8″
Measurement Type	Inch
Cutting Edge Length (L)	‎1-1/8″
Series/List #	500
Connection Diameter Machine Side (DCONMS)	0.3034″
Decimal Equivalent	0.3034″
Flute Count (NOF)	6
End Shape	45° Chamfered End
Overall Length (OAL)	‎3-1/4″
Cutting Diameter Tolerance	‎+0.0003 / -0.0000
Neck Length (LN)	3/4″
Single / Double End	Single End
Cutting Direction (HAND)	Right Hand
Length Group	Regular
Grade	C-2 Sub-Micron

$82.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

.050x.125 INT. GRIND TOOL

Item #: MW17312708050
Brand: Monster Tool Company
Model #: 312-708050

Product Specifications
Cutting Diameter (DC)	0.05″
Usable Length (LU)	1/8″
Depth of Cut Maximum (APMX)	1/8″
Tool Type	Grind Tool
Overall Length (OAL)	‎1-1/2″
Series/List #	312
Flute Count (NOF)	Diamond Cut
Cutting Direction (HAND)	Right Hand
Connection Diameter Machine Side (DCONMS)	1/8″
Decimal Equivalent	0.05″
Coating	Bright
Length Group	Regular
Cutting Edge Material	Solid Tungsten Carbide
Neck Length (LN)	1/4″
End Shape	End Cut
Single / Double End	Single End
Grade	C-2 Sub-Micron

$32.04

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

.0510 ST FL RHC REAMER

Item #: MW205000000510
Brand: Monster Tool Company
Model #: 500-0000510

Product Specifications
Cutting Diameter (DC)	0.051″
Coating	Bright
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \| Aluminum / Non-Ferrous Materials \|
Cutting Edge Material	Solid Tungsten Carbide
Usable Length (LU)	3/8″
Measurement Type	Inch
Cutting Edge Length (L)	3/8″
Series/List #	500
Connection Diameter Machine Side (DCONMS)	0.051″
Tool Type	Reamer
Flute Count (NOF)	4
Decimal Equivalent	0.051″
Overall Length (OAL)	‎1-1/2″
End Shape	45° Chamfered End
Neck Length (LN)	3/8″
Cutting Diameter Tolerance	‎+0.0002 / -0.0000
Cutting Direction (HAND)	Right Hand
Single / Double End	Single End
Grade	C-2 Sub-Micron
Length Group	Regular

$22.16

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Crosby - Turnbuckles; Type: Jaw & Jaw ; Working Load Limit (Lb.): 10000 ; Thread Diameter (Inch): 1 ; Take Up (Inch): 12 ; Body Length (Inch): 6-3/32 ; Closed Length (Inch): 27-11/64

Item #: 65972150
Brand: Crosby
Model #: TB001CR11

Product Specifications

Turnbuckles; Type: Jaw & Jaw ; Working Load Limit (Lb.): 10000 ; Thread Diameter (Inch): 1 ; Take Up (Inch): 12 ; Body Length (Inch): 6-3/32 ; Closed Length (Inch): 27-11/64

Type Jaw & Jaw

Working Load Limit (Lb.) 10000

Thread Diameter (Inch) 1

Take Up (Inch) 12

Body Length (Inch) 6-3/32

Closed Length (Inch) 27-11/64

Open Length (Inch) 39-3/16

Body Neck Length (Inch) 12-3/16

Body Material Galvanized Steel

Fittings Material Steel

$515.09

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.4166M

Item #: 94570561
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-2.4166M

Product Specifications

Material Solid Carbide

Tolerance (Decimal Inch) +0.00002/-0.00002

Blank Number Wire Size #7

Inner Diameter (Decimal Inch) 2.4166

Calibrated No

Traceability Certification Included No

Standards B47.1 Gage Standards; ASME B89.1.6

Go/No Go Master

$253.46

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

.0440 ST FL RHC REAMER

Item #: MW205000000440
Brand: Monster Tool Company
Model #: 500-0000440

Product Specifications
Cutting Diameter (DC)	0.044″
Cutting Edge Material	Solid Tungsten Carbide
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \| Aluminum / Non-Ferrous Materials \|
Measurement Type	Inch
Usable Length (LU)	3/8″
Series/List #	500
Cutting Edge Length (L)	3/8″
Tool Type	Reamer
Connection Diameter Machine Side (DCONMS)	0.0375″
Decimal Equivalent	0.044″
Flute Count (NOF)	4
End Shape	45° Chamfered End
Overall Length (OAL)	‎1-1/2″
Cutting Diameter Tolerance	‎+0.0002 / -0.0000
Cutting Direction (HAND)	Right Hand
Single / Double End	Single End
Grade	C-2 Sub-Micron
Length Group	Regular
Coating	Bright

$22.16

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Brand: Helical Solutions / Part #: 87366

Item #: 89837553
Brand: Helical Solutions
Model #: 87366

Product Specifications

Mill Diameter (Inch) 3/8

Corner Radius (Decimal Inch) 0.0600

Coating/Finish Aplus

End Mill Material Solid Carbide

Number Of Flutes 5

Single Or Double End Single

Overall Length (Inch) 3

Length of Cut (Inch) 1-1/4

Cutting Direction Right Hand

Mill Diameter (Decimal Inch) 0.3750

Flute Direction Right Hand

Overall Length (Decimal Inch) 3.0000

Chipbreaker Yes

End Type Corner Radius

Length Of Cut (Decimal Inch - 4 Decimals) 1.2500

Extended Reach No

Shank Type Round

Centercutting Yes

Variable Index Yes

Variable Helix No

Shank Diameter (Decimal Inch) 0.3750

Shank Diameter (Inch) 3/8

Series End Mills for Steels - 5 Flute - Corner Radius - Chipbreaker Rougher - Variable Pitch

$72.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Brand: ESP Pro / Part #: PRO-311D254C-13

Item #: 48651111
Brand: ESP Pro
Model #: PRO-311D254C-13

Product Specifications

Gauge Type Pressure Dual Scale

Scale Type Dual

Accuracy (%) 1.00%

Dial Type Analog

Thread Type NPT

Bourdon Tube Material Stainless Steel

Type of Liquid Filler No-Fill

Mount Type Bottom

Wetted Parts Material Stainless Steel

Dial Diameter (Inch) 2-1/2

Minimum Pressure (psi) 0.00

Maximum Pressure (Psi - 2 Decimals) 30.00

Minimum Hg 0

Maximum Hg 30

Liquid Filled No

Thread Size 1/4 in NPT

Gauge Connection Size 0.25

Minimum Working Temperature (Deg F) -4

Maximum Working Temperature (F) 150.000

$81.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CM - 15,200 Lb Load Limit, 1-1/4" Thread Diam, 18" Take Up, Forged Steel Turnbuckle Body Turnbuckle

Item #: 81059883
Brand: CM
Model #: 2018JJ

Features and Benefits

The turnbuckle body houses the threaded end fittings. Adjustments to the turnbuckle body affect the tension of the connected cables.

Product Specifications

15,200 Lb Load Limit, 1-1/4" Thread Diam, 18" Take Up, Forged Steel Turnbuckle Body Turnbuckle -

Type Turnbuckle Body

Working Load Limit (Lb.) 15200

Thread Diameter (Inch) 1-1/4

Take Up (Inch) 18

Body Material Forged Steel

Body Finish/Coating Galvanized

$375.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CM - 15,200 Lb Load Limit, 1-1/4" Thread Diam, 12" Take Up, Forged Steel Turnbuckle Body Turnbuckle

Item #: 44341766
Brand: CM
Model #: 2012JJ

Features and Benefits

The turnbuckle body houses the threaded end fittings. Adjustments to the turnbuckle body affect the tension of the connected cables.

Product Specifications

15,200 Lb Load Limit, 1-1/4" Thread Diam, 12" Take Up, Forged Steel Turnbuckle Body Turnbuckle -

Type Turnbuckle Body

Working Load Limit (Lb.) 15200

Thread Diameter (Inch) 1-1/4

Take Up (Inch) 12

Body Material Forged Steel

Body Finish/Coating Galvanized

$301.83

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Cargo Control - Turnbuckles Type: Jaw & Jaw Working Load Limit (Lb.): 5200

Item #: 19454230
Brand: US Cargo Control
Model #: JJTBGV34X6

Features and Benefits

Jaw and jaw types have a pin-secured jaw on both ends. This design is ideal for preventing slip in anchor points that cannot fit a standard eye connector.

Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.

Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.

Product Specifications

Turnbuckles; Type: Jaw & Jaw ; Working Load Limit (Lb.): 5200 ; Thread Diameter (Inch): 3/4 ; Body Length (Inch): 6 ; Closed Length (Inch): 16.609375 ; Open Length (Inch): 24.109375

Type Jaw & Jaw

Working Load Limit (Lb.) 5200

Thread Diameter (Inch) 3/4

Body Length (Inch) 6

Closed Length (Inch) 16.609375

Open Length (Inch) 24.109375

Body Material Steel

Fittings Material Steel

Eye Type Oval

$32.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Cargo Control - Turnbuckles Type: Jaw & Jaw Working Load Limit (Lb.): 5200

Item #: 19454164
Brand: US Cargo Control
Model #: JJTBGV34X18

Features and Benefits

Jaw and jaw types have a pin-secured jaw on both ends. This design is ideal for preventing slip in anchor points that cannot fit a standard eye connector.

Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.

Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.

Product Specifications

Turnbuckles; Type: Jaw & Jaw ; Working Load Limit (Lb.): 5200 ; Thread Diameter (Inch): 3/4 ; Body Length (Inch): 18 ; Closed Length (Inch): 28.609375 ; Open Length (Inch): 48.109375

Type Jaw & Jaw

Working Load Limit (Lb.) 5200

Thread Diameter (Inch) 3/4

Body Length (Inch) 18

Closed Length (Inch) 28.609375

Open Length (Inch) 48.109375

Body Material Steel

Fittings Material Steel

Eye Type Oval

$49.04

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

.2426 ST FL RHC REAMER

Item #: MW205000002426
Brand: Monster Tool Company
Model #: 500-0002426

Product Specifications
Cutting Diameter (DC)	0.2426″
Coating	Bright
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \| Aluminum / Non-Ferrous Materials \|
Cutting Edge Material	Solid Tungsten Carbide
Usable Length (LU)	1″
Measurement Type	Inch
Cutting Edge Length (L)	1″
Series/List #	500
Connection Diameter Machine Side (DCONMS)	0.2426″
Decimal Equivalent	0.2426″
Flute Count (NOF)	4
End Shape	45° Chamfered End
Overall Length (OAL)	‎3-1/4″
Cutting Diameter Tolerance	‎+0.0002 / -0.0000
Neck Length (LN)	3/4″
Single / Double End	Single End
Cutting Direction (HAND)	Right Hand
Length Group	Regular
Grade	C-2 Sub-Micron

$64.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

‎.100-2FL-SE-REG-AlTiN

Item #: MW21250100390B
Brand: Monster Tool Company
Model #: 250-100390B

Product Specifications
Cutting Diameter (DC)	0.1″
Applicable Material	\| Stainless Steel \| Cast Iron \|
Connection Diameter Machine Side (DCONMS)	1/8″
Application	\| Slotting \| Profiling \| Plunging \|
Depth of Cut Maximum (APMX)	0.3″
Grade	C-2 Sub-Micron
Overall Length (OAL)	‎1-1/2″
Length Group	Regular
Cutting Edge Material	Solid Tungsten Carbide
Decimal Equivalent	0.1″
Coating	AlTiN
Series/List #	250
Flute Count (NOF)	2
Cutting Direction (HAND)	Right Hand
Flute Helix Angle (FHA)	30 Degrees
Single / Double End	Single End
End Shape	Square
Center Cutting	Yes

$21.33

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

‎.100-2FL-SE-REG-BALL

Item #: MW21250320100
Brand: Monster Tool Company
Model #: 250-320100

Product Specifications
Cutting Diameter (DC)	0.1″
Application	\| Profiling \| Plunging \| Profile Cutting \| Radiusing \| Radius Slotting \|
Connection Diameter Machine Side (DCONMS)	1/8″
Grade	C-2 Sub-Micron
Depth of Cut Maximum (APMX)	0.3″
Length Group	Regular
Overall Length (OAL)	‎1-1/2″
End Shape	Ballnose
Cutting Edge Material	Carbide
Decimal Equivalent	0.1″
Coating	Bright
Series/List #	250
Flute Count (NOF)	2
Cutting Direction (HAND)	Right Hand
Flute Helix Angle (FHA)	30 Degrees
Center Cutting	Yes
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Aluminum / Non-Ferrous Materials \|
Single / Double End	Single End

$23.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

.4786 ST FL RHC REAMER

Item #: MW205000004786
Brand: Monster Tool Company
Model #: 500-0004786

Product Specifications
Cutting Diameter (DC)	0.4786″
Coating	Bright
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \| Aluminum / Non-Ferrous Materials \|
Cutting Edge Material	Solid Tungsten Carbide
Usable Length (LU)	‎1-1/2″
Measurement Type	Inch
Cutting Edge Length (L)	‎1-1/2″
Series/List #	500
Connection Diameter Machine Side (DCONMS)	0.4786″
Decimal Equivalent	0.4786″
Flute Count (NOF)	6
End Shape	45° Chamfered End
Overall Length (OAL)	4″
Cutting Diameter Tolerance	‎+0.0003 / -0.0000
Neck Length (LN)	7/8″
Single / Double End	Single End
Cutting Direction (HAND)	Right Hand
Length Group	Regular
Grade	C-2 Sub-Micron

$151.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

.1312 ST FL RHC REAMER

Item #: MW205000001312
Brand: Monster Tool Company
Model #: 500-0001312

Product Specifications
Cutting Diameter (DC)	0.1312″
Coating	Bright
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \| Aluminum / Non-Ferrous Materials \|
Cutting Edge Material	Solid Tungsten Carbide
Usable Length (LU)	3/4″
Measurement Type	Inch
Cutting Edge Length (L)	3/4″
Series/List #	500
Connection Diameter Machine Side (DCONMS)	0.1312″
Decimal Equivalent	0.1312″
Flute Count (NOF)	4
End Shape	45° Chamfered End
Overall Length (OAL)	‎2-1/2″
Cutting Diameter Tolerance	‎+0.0002 / -0.0000
Neck Length (LN)	5/8″
Single / Double End	Single End
Cutting Direction (HAND)	Right Hand
Length Group	Regular
Grade	C-2 Sub-Micron

$46.57

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

.4787 ST FL RHC REAMER

Item #: MW205000004787
Brand: Monster Tool Company
Model #: 500-0004787

Product Specifications
Cutting Diameter (DC)	0.4787″
Coating	Bright
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \| Aluminum / Non-Ferrous Materials \|
Cutting Edge Material	Solid Tungsten Carbide
Usable Length (LU)	‎1-1/2″
Measurement Type	Inch
Cutting Edge Length (L)	‎1-1/2″
Series/List #	500
Connection Diameter Machine Side (DCONMS)	0.4787″
Decimal Equivalent	0.4787″
Flute Count (NOF)	6
End Shape	45° Chamfered End
Overall Length (OAL)	4″
Cutting Diameter Tolerance	‎+0.0003 / -0.0000
Neck Length (LN)	7/8″
Single / Double End	Single End
Cutting Direction (HAND)	Right Hand
Length Group	Regular
Grade	C-2 Sub-Micron

$151.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Type	Jaw & Jaw
Working Load Limit (Lb.)	10000
Thread Diameter (Inch)	1
Take Up (Inch)	12
Body Length (Inch)	6-3/32
Closed Length (Inch)	27-11/64
Open Length (Inch)	39-3/16
Body Neck Length (Inch)	12-3/16
Body Material	Galvanized Steel
Fittings Material	Steel

Material	Solid Carbide
Tolerance (Decimal Inch)	+0.00002/-0.00002
Blank Number Wire Size	#7
Inner Diameter (Decimal Inch)	2.4166
Calibrated	No
Traceability Certification Included	No
Standards	B47.1 Gage Standards; ASME B89.1.6
Go/No Go	Master

Mill Diameter (Inch)	3/8
Corner Radius (Decimal Inch)	0.0600
Coating/Finish	Aplus
End Mill Material	Solid Carbide
Number Of Flutes	5
Single Or Double End	Single
Overall Length (Inch)	3
Length of Cut (Inch)	1-1/4
Cutting Direction	Right Hand
Mill Diameter (Decimal Inch)	0.3750
Flute Direction	Right Hand
Overall Length (Decimal Inch)	3.0000
Chipbreaker	Yes
End Type	Corner Radius
Length Of Cut (Decimal Inch - 4 Decimals)	1.2500
Extended Reach	No
Shank Type	Round
Centercutting	Yes
Variable Index	Yes
Variable Helix	No
Shank Diameter (Decimal Inch)	0.3750
Shank Diameter (Inch)	3/8
Series	End Mills for Steels - 5 Flute - Corner Radius - Chipbreaker Rougher - Variable Pitch

Gauge Type	Pressure Dual Scale
Scale Type	Dual
Accuracy (%)	1.00%
Dial Type	Analog
Thread Type	NPT
Bourdon Tube Material	Stainless Steel
Type of Liquid Filler	No-Fill
Mount Type	Bottom
Wetted Parts Material	Stainless Steel
Dial Diameter (Inch)	2-1/2
Minimum Pressure (psi)	0.00
Maximum Pressure (Psi - 2 Decimals)	30.00
Minimum Hg	0
Maximum Hg	30
Liquid Filled	No
Thread Size	1/4 in NPT
Gauge Connection Size	0.25
Minimum Working Temperature (Deg F)	-4
Maximum Working Temperature (F)	150.000

Type	Turnbuckle Body
Working Load Limit (Lb.)	15200
Thread Diameter (Inch)	1-1/4
Take Up (Inch)	18
Body Material	Forged Steel
Body Finish/Coating	Galvanized