Fleet Maintenance > Tire Wheel & Towing Equipment (ET04) - (2593 Products)
Corner Radius End Mill: 1/2" Dia, 1-1/4" LOC, 0.0300" Radius, 5 Flute, Solid Carbide
Item #: 16455032
Brand: Seco
Model #: 10008600
Product Specifications
Mill Diameter (Inch) | 1/2 |
Mill Diameter (Decimal Inch) | 0.5000 |
Number Of Flutes | 5 |
Length of Cut (Inch) | 1-1/4 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Coating/Finish | HTA |
Overall Length (Inch) | 3 |
Flute Direction | Right Hand |
Corner Radius (Decimal Inch) | 0.0300 |
Variable Index | Yes |
Variable Helix | Yes |
Cutting Direction | Right Hand |
Overall Length (Decimal Inch) | 3.0000 |
End Type | Corner Radius |
Length Of Cut (Decimal Inch - 4 Decimals) | 1.2500 |
Length Type | Standard |
Flute Type | Spiral |
Shank Type | Straight-Cylindrical |
Shank Diameter (Decimal Inch) | 0.5000 |
Shank Diameter (Inch) | 1/2 |
UNSPSC Code | 27112803 |
Series | STS540 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 16.50 mm Dia, 36.00 mm LOC, 3 Flute, 0.20 mm Chamfer Width, Solid Carbide
Item #: 05884408
Brand: WNT
Model #: 5359916600
Product Specifications
Mill Diameter (mm) | 16.50 |
Number Of Flutes | 3 |
Length of Cut (mm) | 36.00 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Coating/Finish | PCD |
Centercutting | No |
Flute Direction | Right Hand |
Variable Index | No |
Variable Helix | No |
Cutting Direction | Right Hand |
Chamfer Width (mm) | 0.20 |
Overall Length (mm) | 92.00 |
Coolant Through | No |
Chipbreaker | No |
Chamfer Angle | 45.000 |
Length Type | Short |
Flute Type | Spiral |
Extended Reach | No |
Shank Type | Weldon Flat |
Shank Diameter (mm) | 18.00 |
Neck Diameter (mm) | 15.500 |
UNSPSC Code | 23241614 |
Series | 53599 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 1/4" Dia, 3/8" LOC, 0.0100" Radius, 4 Flute, Solid Carbide
Item #: 19251529
Brand: Accupro
Model #: 14556370
Product Specifications
Mill Diameter (Inch) | 1/4 |
Mill Diameter (Decimal Inch) | 0.2500 |
Number Of Flutes | 4 |
Length of Cut (Inch) | 3/8 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Coating/Finish | AlTiN+ |
Overall Length (Inch) | 2 |
Centercutting | Yes |
Flute Direction | Right Hand |
Corner Radius (Decimal Inch) | 0.0100 |
Variable Index | No |
Variable Helix | No |
Cutting Direction | Right Hand |
Coolant Through | No |
Overall Length (Decimal Inch) | 2.0000 |
Chipbreaker | No |
End Type | Corner Radius |
Length Of Cut (Decimal Inch - 4 Decimals) | 0.3750 |
Length Type | Stub |
Flute Type | Spiral |
Extended Reach | No |
Shank Type | Straight-Cylindrical |
Shank Diameter (Inch) | 1/4 |
Corner Radius Tolerance | ±0.00100 in |
Mill Diameter Tolerance | +0.000000/-0.002000 in |
Shank Diameter Tolerance | +0.0001/-0.0004 in |
UNSPSC Code | 27112803 |
Material Grade | Micrograin |
Series | 6/44 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 0.0930" Dia, 0.279" LOC, 0.0100" Radius, 3 Flute, Solid Carbide
Item #: 75272286
Brand: Walter-Prototyp
Model #: 8414910
Product Specifications
Mill Diameter (Decimal Inch) | 0.0930 |
Number Of Flutes | 3 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Chipbreaker | No |
Coating/Finish | nACRo |
Overall Length (Inch) | 1-1/2 |
Centercutting | Yes |
Flute Direction | Right Hand |
Corner Radius (Decimal Inch) | 0.0100 |
Cutting Direction | Right Hand |
Coolant Through | No |
End Type | Corner Radius |
Length Of Cut (Decimal Inch - 4 Decimals) | 0.2790 |
Extended Reach | No |
Shank Type | Straight-Cylindrical |
Material Removal Type | Roughing & Finishing |
Shank Diameter (Decimal Inch) | 0.8700 |
Reach Length (Decimal Inch) | 0.8701 |
Shank Diameter Tolerance | h6 |
Primary Workpiece Material | Steel |
UNSPSC Code | 27112803 |
Primary Workpiece Material Code | P |
Secondary Workpiece Material | Stainless Steel; Cast Iron; Superalloys & Titanium |
Secondary Workpiece Material Code | S; K; M |
Series | MA230.A-3-R |
Proprietary Coating Designation | WJ30EN |
Manufacturers Catalog Number | MA230.2.36A3S025J-WJ30EN |
Mill Diameter (Decimal Inch) | 0.0930 |
Number Of Flutes | 3 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Chipbreaker | No |
Coating/Finish | nACRo |
Overall Length (Inch) | 1-1/2 |
Centercutting | Yes |
Flute Direction | Right Hand |
Corner Radius (Decimal Inch) | 0.0100 |
Cutting Direction | Right Hand |
Coolant Through | No |
End Type | Corner Radius |
Length Of Cut (Decimal Inch - 4 Decimals) | 0.2790 |
Extended Reach | No |
Shank Type | Straight-Cylindrical |
Material Removal Type | Roughing & Finishing |
Shank Diameter (Decimal Inch) | 0.8700 |
Reach Length (Decimal Inch) | 0.8701 |
Shank Diameter Tolerance | h6 |
Primary Workpiece Material | Steel |
UNSPSC Code | 27112803 |
Primary Workpiece Material Code | P |
Secondary Workpiece Material | Stainless Steel; Cast Iron; Superalloys & Titanium |
Secondary Workpiece Material Code | S; K; M |
Series | MA230.A-3-R |
Proprietary Coating Designation | WJ30EN |
Manufacturers Catalog Number | MA230.2.36A3S025J-WJ30EN |
MSC Part # | 75272286 |
Mfr Part # | 8414910 |
Country of Origin Country of Origin is subject to change | UNITED STATES |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 10.00 mm Dia, 20.00 mm LOC, UT Coated, Corner Radius End, Centercutting Series CXLRS
Item #: 09887811
Brand: US Union Tool
Model #: 2365104
Product Specifications
Mill Diameter (mm) | 10.00 |
Number Of Flutes | 5 |
Length of Cut (mm) | 20.00 |
End Mill Material | Solid Carbide |
Coating/Finish | UT |
Centercutting | Yes |
Flute Direction | Right Hand |
Cutting Direction | Right Hand |
Corner Radius (mm) | 1.50 |
Overall Length (mm) | 80 |
Chipbreaker | No |
End Type | Corner Radius |
Length Of Cut (Decimal Inch - 4 Decimals) | 0.6250 |
Length Type | Long |
Extended Reach | Yes |
Shank Diameter (mm) | 4.00 |
Mill Diameter Tolerance | -0.03 |
Shank Diameter Tolerance | -0.005 |
UNSPSC Code | 27112803 |
Material Grade | Super MG |
Series | CXLRS |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 6.50 mm Dia, 21.00 mm LOC, 3 Flute, 0.20 mm Chamfer Width, Solid Carbide
Item #: 05919782
Brand: WNT
Model #: 5359906600
Product Specifications
Mill Diameter (mm) | 6.50 |
Number Of Flutes | 3 |
Length of Cut (mm) | 21.00 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Coating/Finish | PCD |
Centercutting | No |
Flute Direction | Right Hand |
Variable Index | No |
Variable Helix | No |
Cutting Direction | Right Hand |
Chamfer Width (mm) | 0.20 |
Overall Length (mm) | 63.00 |
Coolant Through | No |
Chipbreaker | No |
Chamfer Angle | 45.000 |
Length Type | Short |
Flute Type | Spiral |
Extended Reach | No |
Shank Type | Weldon Flat |
Shank Diameter (mm) | 8.00 |
Neck Diameter (mm) | 6.100 |
UNSPSC Code | 23241614 |
Series | 53599 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 0.30 mm Dia, 0.60 mm LOC, 0.05 mm Radius, 2 Flute, Solid Carbide
Item #: 05970371
Brand: WNT
Model #: 5360330305
Product Specifications
Mill Diameter (mm) | 0.30 |
Number Of Flutes | 2 |
Length of Cut (mm) | 0.6000 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Coating/Finish | DPX62U |
Centercutting | No |
Flute Direction | Right Hand |
Variable Index | No |
Variable Helix | Yes |
Cutting Direction | Right Hand |
Corner Radius (mm) | 0.05 |
Overall Length (mm) | 48.0000 |
Coolant Through | No |
Chipbreaker | No |
End Type | Corner Radius |
Flute Type | Variable |
Extended Reach | No |
Shank Type | Straight-Cylindrical |
Shank Diameter (mm) | 4.0000 |
Neck Diameter (mm) | 0.270 |
UNSPSC Code | 27112803 |
Series | 53603 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 5/8" Dia, 3" LOC, 0.0600" Radius, 4 Flute, Solid Carbide
Item #: 19525799
Brand: Titan USA
Model #: TC25238
Product Specifications
Mill Diameter (Inch) | 5/8 |
Mill Diameter (Decimal Inch) | 0.6250 |
Number Of Flutes | 4 |
Length of Cut (Inch) | 3 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Coating/Finish | ALCRO-MAX |
Overall Length (Inch) | 6 |
Centercutting | No |
Flute Direction | Right Hand |
Corner Radius (Decimal Inch) | 0.0600 |
Variable Index | No |
Variable Helix | No |
Cutting Direction | Right Hand |
Coolant Through | No |
Pitch | Normal |
Overall Length (Decimal Inch) | 6.0000 |
Chipbreaker | No |
End Type | Corner Radius |
Length Of Cut (Decimal Inch - 4 Decimals) | 3.0000 |
Length Type | Extra Long |
Flute Type | Spiral |
Extended Reach | No |
Shank Type | Straight-Cylindrical |
Material Removal Type | Roughing & Finishing |
Shank Diameter (Decimal Inch) | 0.6250 |
Shank Diameter (Inch) | 5/8 |
Reach Length (Decimal Inch) | 3.0000 |
Reach Length (Inch) | 3 |
Corner Radius Tolerance | -0.0010 to 0.0010 in |
Mill Diameter Tolerance | -0.0020/0.0000 in |
Shank Diameter Tolerance | h6 |
Primary Workpiece Material | Stainless Steel; Cast Iron; Superalloys & Titanium |
UNSPSC Code | 27112803 |
Primary Workpiece Material Code | S; K; M |
Series | TC |
Material Application | High-Temperature Alloy; Ferrous Metal; Stainless Steel; Alloy Steel; Inconel; Titanium Alloy |
Coating Classification | PVD |
For Use With. | Toolholders |
Helix Style | High |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 0.3150" Dia, 0.7000" LOC, 4 Flute, Solid Carbide
Item #: 05107511
Brand: Internal Tool
Model #: 41-3152-C
Product Specifications
Mill Diameter (Decimal Inch) | 0.3150 |
Number Of Flutes | 4 |
End Mill Material | Solid Carbide |
Length of Cut (Decimal Inch) | 0.7000 |
Shank Diameter (Inch) | 3/8 |
Shank Diameter (Decimal Inch) | 0.3750 |
Overall Length (Decimal Inch) | 2.5000 |
Overall Length (Inch) | 2-1/2 |
Single Or Double End | Single |
Coating/Finish Family | AlTiN |
Centercutting | Yes |
Cutting Direction | Right Hand |
Flute Direction | Right Hand |
Extended Reach | No |
Coolant Through | No |
Helix Angle | 30 |
Primary Workpiece Material | Aluminum & Non-Ferrous; High-Temp Alloy; Stainless Steel; Cast Iron; Steel; Hardened Materials |
Primary Workpiece Material Code | P; S; H; K; M; N |
Coating/Finish | AlTiN |
Variable Helix | No |
Variable Index | No |
Chipbreaker | No |
Flute Type | Spiral |
Shank Type | Straight |
Material Grade | Micrograin |
Length Type | Regular |
Mill Diameter Tolerance | +0.0000/-0.0020 in |
Series | 41 |
System Of Measurement | Decimal Inch |
UNSPSC Code | 27112803 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 3/4" Dia, 3-1/4" LOC, 0.1200" Radius, 5 Flute, Solid Carbide
Item #: 09148941
Brand: Walter-Prototyp
Model #: 8417748
Product Specifications
Mill Diameter (Inch) | 3/4 |
Number Of Flutes | 5 |
Length of Cut (Inch) | 3-1/4 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Coating/Finish | nACRo |
Overall Length (Inch) | 6 |
Centercutting | Yes |
Flute Direction | Right Hand |
Corner Radius (Decimal Inch) | 0.1200 |
Cutting Direction | Right Hand |
Coolant Through | No |
Chipbreaker | No |
Extended Reach | Yes |
Shank Type | Straight-Cylindrical |
Material Removal Type | Roughing & Finishing |
Shank Diameter (Inch) | 3/4 |
Reach Length (Decimal Inch) | 4.3071 |
Shank Diameter Tolerance | h6 |
Primary Workpiece Material | Superalloys & Titanium |
UNSPSC Code | 27112803 |
Primary Workpiece Material Code | S |
Secondary Workpiece Material | Stainless Steel; Steel |
Secondary Workpiece Material Code | P; M |
Series | MA377.A-5-R |
Proprietary Coating Designation | WJ30EN |
Manufacturers Catalog Number | MA377.19.1A5L305K-WJ30EN |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 8.00 mm Dia, 17.00 mm LOC, 3 Flute, 0.40 mm Chamfer Width, Solid Carbide
Item #: 05782115
Brand: WNT
Model #: 5357908100
Product Specifications
Mill Diameter (mm) | 8.00 |
Number Of Flutes | 3 |
Length of Cut (mm) | 17.00 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Coating/Finish | PCD |
Centercutting | No |
Flute Direction | Right Hand |
Variable Index | No |
Variable Helix | No |
Cutting Direction | Right Hand |
Chamfer Width (mm) | 0.40 |
Overall Length (mm) | 64.00 |
Coolant Through | No |
Chipbreaker | No |
Chamfer Angle | 45.000 |
Length Type | Short |
Flute Type | Spiral |
Extended Reach | No |
Shank Type | Weldon Flat |
Shank Diameter (mm) | 8.00 |
Neck Diameter (mm) | 7.700 |
UNSPSC Code | 23241614 |
Series | 53579 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 1.20 mm Dia, 1.20 mm LOC, 2 Flute, 0.12 mm Chamfer Width, Solid Carbide
Item #: 09764663
Brand: WNT
Model #: 50900121
Product Specifications
Mill Diameter (mm) | 1.20 |
Number Of Flutes | 2 |
Length of Cut (mm) | 1.20 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Coating/Finish | Ti1001 |
Centercutting | No |
Flute Direction | Right Hand |
Variable Index | No |
Variable Helix | Yes |
Cutting Direction | Right Hand |
Chamfer Width (mm) | 0.12 |
Overall Length (mm) | 55.00 |
Coolant Through | No |
Chipbreaker | No |
Chamfer Angle | 45.000 |
Length Type | Long |
Flute Type | Variable |
Extended Reach | No |
Shank Type | Straight-Cylindrical |
Shank Diameter (mm) | 3.00 |
Neck Diameter (mm) | 1.150 |
UNSPSC Code | 23241614 |
Series | 50900 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 10.00 mm Dia, 8.00 mm LOC, 3.00 mm Radius, 2 Flute, Solid Carbide
Item #: 05997929
Brand: WNT
Model #: 52730100
Product Specifications
Mill Diameter (mm) | 10.00 |
Number Of Flutes | 2 |
Length of Cut (mm) | 8.0000 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Coating/Finish | Ti1000 |
Centercutting | No |
Flute Direction | Right Hand |
Variable Index | No |
Variable Helix | Yes |
Cutting Direction | Right Hand |
Corner Radius (mm) | 3.00 |
Overall Length (mm) | 72.0000 |
Coolant Through | No |
Chipbreaker | No |
End Type | Corner Radius |
Flute Type | Variable |
Extended Reach | No |
Shank Type | Straight-Cylindrical |
Shank Diameter (mm) | 10.0000 |
Neck Diameter (mm) | 9.600 |
UNSPSC Code | 27112803 |
Series | 52730 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 6.50 mm Dia, 17.00 mm LOC, 2 Flute, 0.10 mm Chamfer Width, Solid Carbide
Item #: 05066659
Brand: WNT
Model #: 5362006600
Product Specifications
Mill Diameter (mm) | 6.50 |
Number Of Flutes | 2 |
Length of Cut (mm) | 17.00 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Coating/Finish | Bright/Uncoated |
Centercutting | No |
Flute Direction | Right Hand |
Variable Index | No |
Variable Helix | Yes |
Cutting Direction | Right Hand |
Chamfer Width (mm) | 0.10 |
Overall Length (mm) | 64.00 |
Coolant Through | No |
Chipbreaker | No |
Chamfer Angle | 45.000 |
Length Type | Short |
Flute Type | Variable |
Extended Reach | No |
Shank Type | Weldon Flat |
Shank Diameter (mm) | 8.00 |
Neck Diameter (mm) | 6.200 |
UNSPSC Code | 23241614 |
Series | 53620 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 4.00 mm Dia, 4.50 mm LOC, 0.20 mm Radius, 4 Flute, Solid Carbide
Item #: 05966593
Brand: WNT
Model #: 5360334002
Product Specifications
Mill Diameter (mm) | 4.00 |
Number Of Flutes | 4 |
Length of Cut (mm) | 4.5000 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Coating/Finish | DPX62U |
Centercutting | No |
Flute Direction | Right Hand |
Variable Index | No |
Variable Helix | Yes |
Cutting Direction | Right Hand |
Corner Radius (mm) | 0.20 |
Overall Length (mm) | 60.0000 |
Coolant Through | No |
Chipbreaker | No |
End Type | Corner Radius |
Flute Type | Variable |
Extended Reach | No |
Shank Type | Straight-Cylindrical |
Shank Diameter (mm) | 6.0000 |
Neck Diameter (mm) | 3.900 |
UNSPSC Code | 27112803 |
Series | 53603 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 5/16" Dia, 1-1/2" LOC, 2 Flute, Solid Carbide
Item #: 29769197
Brand: Accupro
Model #: 14788383
Product Specifications
Mill Diameter (Decimal Inch) | 0.3130 |
Mill Diameter (Inch) | 5/16 |
Number Of Flutes | 2 |
End Mill Material | Solid Carbide |
Length of Cut (Decimal Inch) | 1.5000 |
Length of Cut (Inch) | 1-1/2 |
Shank Diameter (Inch) | 5/16 |
Shank Diameter (Decimal Inch) | 0.3130 |
Overall Length (Inch) | 6 |
Single Or Double End | Single |
Coating/Finish Family | AlTiN+ |
Centercutting | Yes |
Flute Direction | Right Hand |
Extended Reach | No |
Coolant Through | No |
Helix Angle | 40 |
Coating/Finish | AlTiN+ |
Variable Helix | No |
Variable Index | No |
Chipbreaker | No |
Flute Type | Spiral |
Shank Type | Straight |
Series | ASQSC2-ATP-CC-40H |
System Of Measurement | Fractional Inch |
UNSPSC Code | 27112803 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 3/16" Dia, 5/8" LOC, 4 Flute, Solid Carbide
Item #: 19250893
Brand: Accupro
Model #: 14556369
Product Specifications
Mill Diameter (Decimal Inch) | 0.1875 |
Mill Diameter (Inch) | 3/16 |
Number Of Flutes | 4 |
End Mill Material | Solid Carbide |
Length of Cut (Decimal Inch) | 0.6250 |
Length of Cut (Inch) | 5/8 |
Shank Diameter (Inch) | 3/16 |
Shank Diameter (Decimal Inch) | 0.1875 |
Overall Length (Decimal Inch) | 2.0000 |
Overall Length (Inch) | 2 |
Single Or Double End | Single |
Coating/Finish Family | AlTiN+ |
Centercutting | Yes |
Cutting Direction | Right Hand |
Flute Direction | Right Hand |
Extended Reach | No |
Coolant Through | No |
Helix Angle | 40 |
Coating/Finish | AlTiN+ |
Variable Helix | No |
Variable Index | No |
Chipbreaker | No |
Flute Type | Spiral |
Shank Type | Straight |
Material Grade | Micrograin |
Length Type | Regular |
Length Of Cut Range (Decimal Inch) | 0.6000 - 0.7000 |
Mill Diameter Tolerance | +0.0000 to -0.0020 in |
Shank Diameter Tolerance | -0.0001/-0.0004 in |
Series | ASQSC4-ATP-CC-40H |
System Of Measurement | Fractional Inch |
UNSPSC Code | 27112803 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 1/2" Dia, 5/8" LOC, 0.0600" Radius, 4 Flute, Solid Carbide
Item #: 09203423
Brand: Walter-Prototyp
Model #: 8417509
Product Specifications
Mill Diameter (Inch) | 1/2 |
Number Of Flutes | 4 |
Length of Cut (Inch) | 5/8 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Coating/Finish | nACo |
Overall Length (Inch) | 4 |
Centercutting | Yes |
Flute Direction | Right Hand |
Corner Radius (Decimal Inch) | 0.0600 |
Cutting Direction | Right Hand |
Coolant Through | No |
Chipbreaker | No |
Extended Reach | Yes |
Shank Type | Straight-Cylindrical |
Material Removal Type | Roughing & Finishing |
Shank Diameter (Inch) | 1/2 |
Reach Length (Decimal Inch) | 2.5039 |
Shank Diameter Tolerance | h6 |
Primary Workpiece Material | Superalloys & Titanium |
UNSPSC Code | 27112803 |
Primary Workpiece Material Code | S |
Secondary Workpiece Material | Stainless Steel; Steel |
Secondary Workpiece Material Code | P; M |
Series | MA377.A-4-R-C |
Proprietary Coating Designation | WJ30EM |
Manufacturers Catalog Number | MA377.12.7A4D152E-WJ30EM |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 6.00 mm Dia, 6.00 mm LOC, 2.00 mm Radius, 2 Flute, Solid Carbide
Item #: 05939624
Brand: WNT
Model #: 52734061
Product Specifications
Mill Diameter (mm) | 6.00 |
Number Of Flutes | 2 |
Length of Cut (mm) | 6.0000 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Coating/Finish | Ti1000 |
Centercutting | No |
Flute Direction | Right Hand |
Variable Index | No |
Variable Helix | Yes |
Cutting Direction | Right Hand |
Corner Radius (mm) | 2.00 |
Overall Length (mm) | 100.0000 |
Coolant Through | No |
Chipbreaker | No |
End Type | Corner Radius |
Flute Type | Variable |
Extended Reach | No |
Shank Type | Straight-Cylindrical |
Shank Diameter (mm) | 8.0000 |
Neck Diameter (mm) | 5.600 |
UNSPSC Code | 27112803 |
Series | 52734 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 3.50 mm Dia, 7.00 mm LOC, 3 Flute, 0.10 mm Chamfer Width, Solid Carbide
Item #: 09564238
Brand: WNT
Model #: 5060903500
Product Specifications
Mill Diameter (mm) | 3.50 |
Number Of Flutes | 3 |
Length of Cut (mm) | 7.00 |
Single Or Double End | Single |
End Mill Material | Solid Carbide |
Coating/Finish | Ti1000 |
Centercutting | No |
Flute Direction | Right Hand |
Variable Index | No |
Variable Helix | Yes |
Cutting Direction | Right Hand |
Chamfer Width (mm) | 0.10 |
Overall Length (mm) | 45.00 |
Coolant Through | No |
Chipbreaker | No |
Chamfer Angle | 45.000 |
Length Type | Extra-Short |
Flute Type | Variable |
Extended Reach | No |
Shank Type | Weldon Flat |
Shank Diameter (mm) | 6.00 |
UNSPSC Code | 23241614 |
Series | 50609 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It