14mm Opening - "Y" Drive - Open End - Pre-Set Torque Head

Item #: KL45TCQYOM14A
Manufacturer: CDI
Mfg #: 9936165

Technical Specifications:
•Brand Name: CDI •Class: Wrench •Description: Drive Head for Pre-Set Torque Wrench •Drive: Y-(0.560) •Metric: 14 •Type: Open End

Description:

Shipping Info:
•Actual Weight - .0002

$79.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 9/16" Box End Torque Wrench Head - H4 Tang

Item #: KP4219525
Manufacturer: Proto
Mfg #: JH4-18B

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH4-250, JH4-150PS, JH4-50FPS •Head Height: 7/16 •Length: 3-5/32 •Maximum Output: 900 •Model Number: JH4-18B •Size: 9/16 •Width: 27/32

Description:
•The Proto® TorquePlus™ Design, a high performance drive configuration which allows for quick and easy wrench engagement with the fastener flats, not the corners. •12 point box end allows for fine indexing, helping to improve speed and access. •Fits 4, 6 and 12 point fasteners. •Indexed to 7.5° to help keep shank clear of obstructions by allowing the user to flip the wrench over to continue turning the fastener. •Countersunk on both sides to allow for easy application to the fastener.

Shipping Info:
•Actual Weight - .1100 •Dimensions - Height: .500 Length: 3.20 Width: .900

$80.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Replacement Sq Drive for TM-392 & TM-492

Item #: KL45TM392RSD
Manufacturer: CDI
Mfg #: 9261335

Technical Specifications:
•Brand Name: CDI •Class: Wrench •Type: Torque Multiplier - Replacement Square

Description:

Shipping Info:
•Actual Weight - .5000

$324.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 17mm Open End Torque Wrench Head - H5 Tang

Item #: KP4219775
Manufacturer: Proto
Mfg #: JH5-17M

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH5-100F, JH5-6006C, JH5-150FPS, JH5-200FPS •Head Height: 5/8 •Length: 3-7/8 •Maximum Output: 1235 •Model Number: JH5-17M •Size: 10mm •Width: 1-7/16

Description:
•Open end is angled to 15° to help keep shank clear of obstructions helping to improve access.

Shipping Info:
•Actual Weight - .2400 •Dimensions - Height: .600 Length: 3.90 Width: 1.50

$85.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 1/4" Drive Dial Torque Wrench 2-10 Nm, 18-90 in-lbs

Item #: KP4221020
Manufacturer: Proto
Mfg #: J6169NMF

Technical Specifications:
•Brand Name: Proto •Finish: Full Polish •Length: 10 •Maximum Output: 90 •Model Number: J6169NMF

Description:
•2-10 Nm thru 50-250 Nm / 18-90 in-lbs thru 35-175 ft-lbs •Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale. •Industrial all steel or aluminum torque transfer components. •High alloy torsion drive design " accuracy not effected by hand position. •Dual scale (Metric/English) with clockwise and counterclockwise operation " fewer wrenches needed to complete job. •Memory needles are standard on all wrenches except electric light models. •Easy-to-read, high contrast scale. •Laser marked serial number for traceability. •N.I.S.T. (National Institute of Standards and Technology) traceable CW certification supplied with each wrench.

Shipping Info:
•Actual Weight - 1.9600 •Dimensions - Height: 3.20 Length: 11.1 Width: 5.50

$307.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

7/16" Opening - "J" Drive - Open End - Pre-Set Torque Head

Item #: KL45TCQJO14A
Manufacturer: CDI
Mfg #: TCQJO14A

Technical Specifications:
•Brand Name: CDI •Class: Wrench •Description: Drive Head for Pre-Set Torque Wrench •Drive: J-(0.425) •Size: 7/16 •Type: Open End

Description:
•Open End-SAE Pre-Set Torque Heads

Shipping Info:
•Actual Weight - .0884

$101.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® Torque Multiplier 3200 ft-lbs

Item #: KP4221060
Manufacturer: Proto
Mfg #: J6232

Technical Specifications:
•Brand Name: Proto •Finish: Full Polish •Length: 19-19/32 •Model Number: J6232

Description:
•Maximum rated input: 173 ft-lbs (235 Nm).•Maximum rated output: 3200 ft-lbs (4338 Nm). •Standard torque accuracy is +/- 5% of reading. •Reaction system: tubular reaction bar. •Gear system: two stage planetary. •Angle of turn protractor: 5° increments. •Anti-backlash device: self-contained, 3 position.

Shipping Info:
•Actual Weight - 22.5700 •Dimensions - Height: 5.30 Length: 16.1 Width: 7.50

$3,804.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/4" Drive - "J" - Interchangead Head Ratchet

Item #: KL45TCQJD8A72
Manufacturer: CDI
Mfg #: 9956668

Technical Specifications:
•Brand Name: CDI •Drive: 1/4 •Style: Interchangeable Head •Type: Torque

Description:
•Interchangeable heads permit ratcheting, fixed, or open end torquing capability with adjustable torque wrench bodies •A push of the locking pin provides quick-change action, with a wide range of head styles to choose from •Black oxide finish

Shipping Info:
•Actual Weight - .1677

$133.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

22mm Opening - "Y" Drive - Standard Box End - Pre-Set Torque Head

Item #: KL45TCQYXM22A
Manufacturer: CDI
Mfg #: 9936967

Technical Specifications:
•Brand Name: CDI •Class: Wrench •Description: Drive Head for Pre-Set Torque Wrench •Drive: Y-(0.560) •Metric: 22 •Type: Box End

Description:
•12-Point Box End Heads Metric

Shipping Info:
•Actual Weight - .0002

$108.46

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 19mm Open End Torque Wrench Head - H7 Tang

Item #: KP4220060
Manufacturer: Proto
Mfg #: JH7-19M

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH7-250F, JH7-6014C •Head Height: 13/16 •Length: 5-1/2 •Maximum Output: 1650 •Model Number: JH7-19M •Size: 10mm •Width: 1-19/32

Description:
•Open end is angled to 15° to help keep shank clear of obstructions helping to improve access.

Shipping Info:
•Actual Weight - .4200 •Dimensions - Height: .800 Length: 5.50 Width: 1.60

$82.21

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

7/16" Opening - "J" Drive - Standard Box End - Pre-Set Torque Head

Item #: KL45TCQJX14A
Manufacturer: CDI
Mfg #: 9934710

Technical Specifications:
•Brand Name: CDI •Class: Wrench •Description: Drive Head for Pre-Set Torque Wrench •Drive: J-(0.425) •Size: 7/16 •Type: Box End

Description:
•12-Pt. Box End Heads SAE

Shipping Info:
•Actual Weight - .0664

$185.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 1/2" Drive Electronic Torque Tester 25-250 ft-lbs

Item #: KP4220200
Manufacturer: Proto
Mfg #: J6476

Technical Specifications:
•Brand Name: Proto •Head Height: 4-1/2 •Length: 6 •Maximum Output: 3000 •Model Number: J6476 •Width: 6

Description:
•Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required. •Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions. •Broad accuracy range extends from 10% to 100% of full scale. •Three units of measure are available ft-lb, in-lb, and Nm. •Three operating modes: Track Mode, Peak Hold and First Peak (for use with Click-style Torque wrenches). •Fast sampling rate helps maintain high accuracy during torque applications. •Each tester is built with a male square drive and also comes supplied with a female-to-female square drive adapter. •Powered by a standard 9V battery, providing up to 50 hours run time. •N.I.S.T. (National Institute of Standards and Technology) traceable certification supplied with each tester. •Optional all-steel stand (J6470S) provides a strong support with minimal footprint. •Testers meet or exceed requirements set forth in ASME B107.29

Shipping Info:
•Actual Weight - 6.1600 •Dimensions - Height: 7.50 Length: 8.50 Width: 8.30

$1,833.44

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

25mm Opening - "J" Drive - Open End - Pre-Set Torque Head

Item #: KL45TCQJOM25A
Manufacturer: CDI
Mfg #: 9934307

Technical Specifications:
•Brand Name: CDI •Class: Wrench •Description: Drive Head for Pre-Set Torque Wrench •Drive: J-(0.425) •Metric: 25 •Type: Open End

Description:

Shipping Info:
•Actual Weight - .0002

$144.14

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 3/4" Open End Torque Wrench Head - H7 Tang

Item #: KP4219985
Manufacturer: Proto
Mfg #: JH7-24

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH7-250F, JH7-6014C •Head Height: 13/16 •Length: 5-1/2 •Maximum Output: 1500 •Model Number: JH7-24 •Size: 3/4 •Width: 1-19/32

Description:
•Open end is angled to 15° to help keep shank clear of obstructions helping to improve access.

Shipping Info:
•Actual Weight - .4200 •Dimensions - Height: .800 Length: 5.50 Width: 1.60

$80.35

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 17mm Box End Torque Wrench Head - H5 Tang

Item #: KP4219670
Manufacturer: Proto
Mfg #: JH5-17MB

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH5-100F, JH5-6006C, JH5-150FPS, JH5-200FPS •Head Height: 5/8 •Length: 3-7/8 •Maximum Output: 2400 •Model Number: JH5-17MB •Size: 10mm •Width: 1

Description:
•The Proto® TorquePlus™ Design, a high performance drive configuration which allows for quick and easy wrench engagement with the fastener flats, not the corners. •12 point box end allows for fine indexing, helping to improve speed and access. •Fits 4, 6 and 12 point fasteners. •Indexed to 7.5° to help keep shank clear of obstructions by allowing the user to flip the wrench over to continue turning the fastener. •Countersunk on both sides to allow for easy application to the fastener.

Shipping Info:
•Actual Weight - .2100 •Dimensions - Height: .600 Length: 3.90 Width: 1.00

$83.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 1/2" Box End Torque Wrench Head - H5 Tang

Item #: KP4219605
Manufacturer: Proto
Mfg #: JH5-16B

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH5-100F, JH5-6006C, JH5-150FPS, JH5-200FPS •Head Height: 5/8 •Length: 3-3/4 •Maximum Output: 900 •Model Number: JH5-16B •Size: 1/2 •Width: 25/32

Description:
•The Proto® TorquePlus™ Design, a high performance drive configuration which allows for quick and easy wrench engagement with the fastener flats, not the corners. •12 point box end allows for fine indexing, helping to improve speed and access. •Fits 4, 6 and 12 point fasteners. •Indexed to 7.5° to help keep shank clear of obstructions by allowing the user to flip the wrench over to continue turning the fastener. •Countersunk on both sides to allow for easy application to the fastener.

Shipping Info:
•Actual Weight - .1500 •Dimensions - Height: .600 Length: 3.80 Width: .800

$80.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 15/16" Open End Torque Wrench Head - H7 Tang

Item #: KP4220000
Manufacturer: Proto
Mfg #: JH7-30

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH7-250F, JH7-6014C •Head Height: 13/16 •Length: 5-5/8 •Maximum Output: 2970 •Model Number: JH7-30 •Size: 15/16 •Width: 1-31/32

Description:
•Open end is angled to 15° to help keep shank clear of obstructions helping to improve access.

Shipping Info:
•Actual Weight - .5300 •Dimensions - Height: .800 Length: 5.70 Width: 2.00

$89.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

13/16" Opening - "J" Drive - Open End - Pre-Set Torque Head

Item #: KL45TCQJO26A
Manufacturer: CDI
Mfg #: TCQJO26A

Technical Specifications:
•Brand Name: CDI •Class: Wrench •Description: Drive Head for Pre-Set Torque Wrench •Drive: J-(0.425) •Size: 13/16 •Type: Open End

Description:
•Open End-SAE Pre-Set Torque Heads

Shipping Info:
•Actual Weight - .2251

$121.89

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 1/2" Drive Ratcheting Head Micrometer Torque Wrench 16-80 ft-lbs

Item #: KP4220790
Manufacturer: Proto
Mfg #: J6008CXCER

Technical Specifications:
•Brand Name: Proto •Description: Yes •Finish: Full Polish •Length: 15-1/32 •Model Number: J6008CXCERT

Description:
•Calibrated to +/- 4% in clockwise direction and +/- 6% in counter clockwise direction. •Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity. •Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). CERT Version Only. •Manufactured to meet precision/highly accurate applications such as military and aerospace.

Shipping Info:
•Actual Weight - 3.1500 •Dimensions - Height: 2.50 Length: 19.3 Width: 3.00

$343.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto® 11/16" Box End Torque Wrench Head - H5 Tang

Item #: KP4219620
Manufacturer: Proto
Mfg #: JH5-22B

Technical Specifications:
•Brand Name: Proto •Finish: Black Oxide •For Use With: JH5-100F, JH5-6006C, JH5-150FPS, JH5-200FPS •Head Height: 5/8 •Length: 3-7/8 •Maximum Output: 2400 •Model Number: JH5-22B •Size: 11/16 •Width: 1

Description:
•The Proto® TorquePlus™ Design, a high performance drive configuration which allows for quick and easy wrench engagement with the fastener flats, not the corners. •12 point box end allows for fine indexing, helping to improve speed and access. •Fits 4, 6 and 12 point fasteners. •Indexed to 7.5° to help keep shank clear of obstructions by allowing the user to flip the wrench over to continue turning the fastener. •Countersunk on both sides to allow for easy application to the fastener.

Shipping Info:
•Actual Weight - .2100 •Dimensions - Height: .600 Length: 3.90 Width: 1.00

$85.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It