Proto - 8mm x 9mm Standard Open End Wrench - 5-1/8" OAL, Double End, Satin Finish, 15° Head Angle

Item #: 85217743
Brand: Proto
Model #: J30809
Exact Tooling IR#: 04

Features and Benefits

Open end wrenches are used for tightening or loosening fasteners. They are designed with an offset opening and are available in both single or double end options.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Satin finishes offer slip resistant grips and are corrosion-resistant.

Double end wrenches are designed with two working ends which may be the same or different sizes.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Open End Wrench
Style	Standard
Size (mm)	8 x 9
Finish/Coating	Satin
Head Type	Double End
Overall Length (Inch)	5-1/8
Head Angle	15
Warranty	Mfr's Lifetime Warranty
Material	Steel
PSC Code	5120

Product Specifications

Wrench Type Open End Wrench

Style Standard

Size (mm) 8 x 9

Finish/Coating Satin

Head Type Double End

Overall Length (Inch) 5-1/8

Head Angle 15

Warranty Mfr's Lifetime Warranty

Material Steel

PSC Code 5120

$14.82

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Paramount - 16 Piece, 1/4 to 1-1/4", Combination Wrench Set - Inch System of Measurement, Satin Chrome Finish, Comes in Canvas Roll

Item #: 62492921
Brand: Paramount
Model #: PAR-PRFS16-1
Exact Tooling IR#: 04

Product Specifications
Tool Type	Combination Wrench
System of Measurement	Inch
Size Range (Inch)	1/4 - 1-1/4
Number of Pieces	16
Finish/Coating	Satin Chrome
Fractional Size	1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-1/4
Container Type	Canvas Roll
PSC Code	5120

$90.55

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - 7/8" Box End Torque Wrench Interchangeable Head - 0.88" Capacity, Use with CDI Torque Wrenches 200NMIMH, 150MFIMHSS, 250NFIMHSS, 100T-I, 200T-I

Item #: 73760977
Brand: CDI
Model #: TCQYX28A
Exact Tooling IR#: 04

Product Specifications
Head Type	Box End
Size (Inch)	7/8
Maximum Torque (Ft/Lb)	160
Capacity (Decimal Inch)	0.88
For Use With	CDI Torque Wrenches 200NMIMH, 150MFIMHSS, 250NFIMHSS, 100T-I, 200T-I
PSC Code	5120

$166.20

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.0808; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1

Item #: 03309853
Brand: GSG
Model #: GSG-CR-2.0808C

Product Specifications

Material Solid Carbide

Tolerance (Decimal Inch) 0.00000/-0.00004

Blank Number Wire Size #7

Inner Diameter (Decimal Inch) 2.0808

Calibrated Yes

Traceability Certification Included NIST

Go/No Go Go

Standards B47.1 Gage Standards; ASME B89.1.6

UNSPSC Code 41111619

$2,550.80

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 5/8" 12 Point 3/8" Drive Chrome Box End Torque Adapters - 29/32" Head Diam x 25/64" Head Thickness, 2-55/64" OAL

Item #: 96743885
Brand: Proto
Model #: J5120
Exact Tooling IR#: 04

Product Specifications
Style	Box End Torque Adapters
System of Measurement	Inch
Drive Size (Inch)	3/8
Size (Inch)	5/8
Finish/Coating	Chrome
Number of Points	12
Overall Length (Inch)	2-55/64
ASME Spec	AS954E S3.8.1
Head Diameter (Inch)	29/32
Head Thickness (Inch)	25/64
Warranty	Mfr's Limited Lifetime Warranty
PSC Code	5120

$27.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - 9/16" Flare Nut Torque Wrench Interchangeable Head - Use with CDI Torque Wrenches 50NMIMH, 100NIMIMH, 75MFIMHSS, 5T-I, 10T-I, 10ST-I, 50T-I

Item #: 82680620
Brand: CDI
Model #: TCQJRXS18A
Exact Tooling IR#: 04

Product Specifications
Head Type	Flare Nut
Size (Inch)	9/16
For Use With	CDI Torque Wrenches 50NMIMH, 100NIMIMH, 75MFIMHSS, 5T-I, 10T-I, 10ST-I, 50T-I
PSC Code	5120

$159.29

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Extension Springs; End Type: Hook; Outside Diameter (Decimal Inch

Item #: 03237641
Brand: Associated Spring Raymond
Model #: MH10001156000S

Product Specifications

End Type Hook

Outside Diameter (Decimal Inch - 4 Decimals) 1.0000

Spring Rate 8.3300

Material Stainless Steel

Overall Length (Decimal Inch) 6.2300

Initial Tension (Lb.) 4.08

Maximum Extended Length (Decimal Inch) 10.9700

Free Length (Inch) 6

Inside Hook Length (Fractional Inch) 6

Standards AMS 5688; ASTM A313

Finish/Coating Uncoated

Wire Size (Decimal Inch) 0.1150

UNSPSC Code 31161907

$12.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 10" Aluminum Nonsparking Pipe Wrench - 2-1/2" Pipe Capacity

Item #: 05054226
Brand: Ampco
Model #: W-211AL
Exact Tooling IR#: 04

Product Specifications
Type	NonSparking
Maximum Pipe Capacity (Inch)	2-1/2
Overall Length (Inch)	10
Material	Aluminum
Finish/Coating	None
PSC Code	5120

$373.44

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 15 Piece, 7 to 21mm, 12 Point, Combination Wrench Set - Metric System of Measurement, Satin Finish, Comes in Nylon Roll

Item #: 85223022
Brand: Proto
Model #: J1200F-MASD
Exact Tooling IR#: 04

Product Specifications
Tool Type	Combination Wrench
System of Measurement	Metric
Size Range (mm)	7.0 - 21.0
Number of Pieces	15
Finish/Coating	Satin
Metric Size	7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21
Number of Points	12
Container Type	Nylon Roll
PSC Code	5120

$323.78

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - 1-5/8" Open End Torque Wrench Interchangeable Head - Use with CDI Torque Wrenches 350NMIMH, 300T-I

Item #: 73763401
Brand: CDI
Model #: TCQXO52A
Exact Tooling IR#: 04

Product Specifications
Head Type	Open End
Size (Inch)	1-5/8
For Use With	CDI Torque Wrenches 350NMIMH, 300T-I
PSC Code	5120

$276.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

GearWrench - 12 Piece, 8mm to 19mm, Combination Wrench Set - Metric Measurement Standard, Chrome Finish, Comes in Tray

Item #: 59722280
Brand: GearWrench
Model #: 9412
Exact Tooling IR#: 04

Product Specifications
Tool Type	Combination Wrench
System of Measurement	Metric
Size Range (mm)	8.0 - 19.0
Number of Pieces	12
Finish/Coating	Chrome
Metric Size	8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19
Warranty	Mfr's Lifetime Warranty
Container Type	Tray
Additional Information	12 Metric Combination Ratchet Wrenches
PSC Code	5120

$133.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Sturtevant Richmont - 1/2" Drive Preset Clicker - 30 Ft/Lb to 204 N/m Torque, 18-1/4" OAL

Item #: 78328655
Brand: Sturtevant Richmont
Model #: 810056
Exact Tooling IR#: 04

Product Specifications
Type	Preset
Drive Size (Inch)	1/2
Maximum Torque (In/Lb)	1800.0
Maximum Torque (Ft/Lb)	150.00
Maximum Torque (Nm)	204.000
Minimum Torque (Ft/Lb)	30.00
Overall Length (Inch)	18-1/4
Tool Type	Preset Clicker
PSC Code	5120

$284.80

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 2-3/4" 12 Point Striking Box Wrench - Single End, 4" Head Diam x 1-1/2" Head Thickness, 13-1/2" OAL, Steel

Item #: 85246114
Brand: Proto
Model #: J2644SW
Exact Tooling IR#: 04

Features and Benefits

Striking box wrenches are short, thick and designed to loosen or tighten large fasteners by the striking of a hammer. The hammer hits the wrench on the flat or anvil area for this operation.

Non-ratcheting wrenches must disengage and re-engage from the fastener to loosen or tighten.

Single end wrenches are designed with one working end.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Striking
Style	Nonratcheting
Size (Inch)	2-3/4
Number of Points	12
Head Type	Single End
Additional Information	Offset
Overall Length (Inch)	13-1/2
Material	Steel
Head Diameter (Inch)	4
Head Thickness (Inch)	1-1/2
PSC Code	5120

Product Specifications

Wrench Type Striking

Style Nonratcheting

Size (Inch) 2-3/4

Number of Points 12

Head Type Single End

Additional Information Offset

Overall Length (Inch) 13-1/2

Material Steel

Head Diameter (Inch) 4

Head Thickness (Inch) 1-1/2

PSC Code 5120

$202.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 9/16" 12 Point 3/8" Drive Chrome Box End Torque Adapters - 13/16" Head Diam x 23/64" Head Thickness, 2-13/16" OAL

Item #: 93071934
Brand: Proto
Model #: J5118
Exact Tooling IR#: 04

Product Specifications
Style	Box End Torque Adapters
System of Measurement	Inch
Drive Size (Inch)	3/8
Size (Inch)	9/16
Finish/Coating	Chrome
Number of Points	12
Overall Length (Inch)	2-13/16
ASME Spec	AS954E S3.8.1
Head Diameter (Inch)	13/16
Head Thickness (Inch)	23/64
Warranty	Mfr's Limited Lifetime Warranty
PSC Code	5120

$25.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 2-3/16" 12 Point Tethered Striking Box Wrench - Single End, 13-1/2" OAL, Steel, Black Finish

Item #: 61645214
Brand: Proto
Model #: J2635SW-TT
Exact Tooling IR#: 04

Features and Benefits

Striking box wrenches are short, thick and designed to loosen or tighten large fasteners by the striking of a hammer. The hammer hits the wrench on the flat or anvil area for this operation.

Non-ratcheting wrenches must disengage and re-engage from the fastener to loosen or tighten.

Tethered wrenches are designed with a tethering system to prevent the user from dropping the wrench when using them at height.

Single end wrenches are designed with one working end.

Black finishes are oil-based and are non-reflective, corrosion-resistant and visually distinctive.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Striking
Style	Nonratcheting
Style	Tethered
Size (Inch)	2-3/16
Number of Points	12
Head Type	Single End
Finish/Coating	Black
Overall Length (Inch)	13-1/2
Material	Steel
PSC Code	5120

Product Specifications

Wrench Type Striking

Style Nonratcheting

Style Tethered

Size (Inch) 2-3/16

Number of Points 12

Head Type Single End

Finish/Coating Black

Overall Length (Inch) 13-1/2

Material Steel

PSC Code 5120

$157.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Paramount - 15/16" x 1" Standard Open End Wrench - 11-17/32" OAL, Double End, Full Polish Finish, 15° Head Angle

Item #: 70838313
Brand: Paramount
Model #: PAR-PRONSL3032S
Exact Tooling IR#: 04

Features and Benefits

Open end wrenches are used for tightening or loosening fasteners. They are designed with an offset opening and are available in both single or double end options.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Full polish finishes are easy to clean and corrosion-resistant.

Double end wrenches are designed with two working ends which may be the same or different sizes.

Chrome vanadium steel is a strong corrosion-resistant alloy that is stronger than standard steel.

Product Specifications
Wrench Type	Open End Wrench
Style	Standard
Size (Inch)	15/16 x 1
Finish/Coating	Full Polish
Head Type	Double End
Overall Length (Inch)	11-17/32
Head Angle	15
ASME Spec	B107.100
Warranty	Mfr's Lifetime Warranty
Material	Chrome Vanadium Steel
Additional Information	Nonslip Design
PSC Code	5120

Product Specifications

Wrench Type Open End Wrench

Style Standard

Size (Inch) 15/16 x 1

Finish/Coating Full Polish

Head Type Double End

Overall Length (Inch) 11-17/32

Head Angle 15

ASME Spec B107.100

Warranty Mfr's Lifetime Warranty

Material Chrome Vanadium Steel

Additional Information Nonslip Design

PSC Code 5120

$12.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 11/32" Stubby Open End Wrench - 3-3/4" OAL, Double End, Satin Finish, 15° & 75° Head Angle

Item #: 85242758
Brand: Proto
Model #: J3322
Exact Tooling IR#: 04

Features and Benefits

Open end wrenches are used for tightening or loosening fasteners. They are designed with an offset opening and are available in both single or double end options.

Stubby wrenches are used for accessing tight areas where regular-sized wrenches cannot fit. They are smaller in overall length versus a standard open end wrench.

Satin finishes offer slip resistant grips and are corrosion-resistant.

Double end wrenches are designed with two working ends which may be the same or different sizes.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Open End Wrench
Style	Stubby
Size (Inch)	11/32
Finish/Coating	Satin
Head Type	Double End
Overall Length (Inch)	3-3/4
Head Angle	15, 75
Warranty	Mfr's Lifetime Warranty
Material	Steel
PSC Code	5120

Product Specifications

Wrench Type Open End Wrench

Style Stubby

Size (Inch) 11/32

Finish/Coating Satin

Head Type Double End

Overall Length (Inch) 3-3/4

Head Angle 15, 75

Warranty Mfr's Lifetime Warranty

Material Steel

PSC Code 5120

$12.13

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Turning Insert: SNMG434RM MP7035, Carbide

Item #: 04137766
Brand: Mitsubishi
Model #: 644421

Product Specifications

ANSI Insert Code SNMG434

ISO Insert Code SNMG120416

Relief Angle 0

Insert Style SNMG

Corner Radius (mm) 1.60

Corner Radius (Inch) 1/16

Corner Radius (Decimal Inch) 0.0625

Included Angle 90

Manufacturer Grade MP7035

Coating/Finish PVD

Insert Hand Neutral

Insert Thickness (Inch) 3/16

Insert Thickness 4.76

Insert Thickness (Decimal Inch) 0.1875

Inscribed Circle (Decimal Inch) 0.5000

Inscribed Circle (Inch) 1/2

Inscribed Circle (mm) 12.70

Insert Material Carbide

Insert Shape S - Square

Chip Breaker Operation Medium Machining; Roughing

Grade Characteristics Stainless Steel (M) - High Toughness

Side Clearance Negative

Number Of Cutting Edges 8

Insert Shape Code S

Clearance Code N

Tolerance Code M

Primary Workpiece Material Code M

Chip Breaker RM

ANSI Size Code 434

ISO Size Code 120416

UNSPSC Code 23242105

Insert Size Code 4

$14.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Facom - 46mm Standard Service Open End Wrench - 15-9/16" OAL, Single End, Black Finish, 15° Head Angle

Item #: 63013908
Brand: Facom
Model #: 45.46
Exact Tooling IR#: 04

Features and Benefits

Service wrenches are used for confined spaces and difficult-to-reach fasteners.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Black finishes are oil-based and are non-reflective, corrosion-resistant and visually distinctive.

Single end wrenches are designed with one working end.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Service
Style	Standard
Size (mm)	46
Finish/Coating	Black
Head Type	Single End
Overall Length (Inch)	15-9/16
Head Angle	15
Head Thickness (Inch)	5/8
Warranty	Mfr's Limited Lifetime Warranty
Material	Steel
Head Width (Inch)	3-49/64
PSC Code	5120

Product Specifications

Wrench Type Service

Style Standard

Size (mm) 46

Finish/Coating Black

Head Type Single End

Overall Length (Inch) 15-9/16

Head Angle 15

Head Thickness (Inch) 5/8

Warranty Mfr's Limited Lifetime Warranty

Material Steel

Head Width (Inch) 3-49/64

PSC Code 5120

$60.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

GearWrench - 9 Piece, 5/16" to 3/4", 12 Point Ratcheting Box Wrench Set - Inch Measurement Standard, Full Polish Finish, Comes in Molded Case

Item #: 86567906
Brand: GearWrench
Model #: 85998
Exact Tooling IR#: 04

Product Specifications
Tool Type	Ratcheting Box Wrench
System of Measurement	Inch
Size Range (Inch)	5/16 - 3/4
Number of Pieces	9
Finish/Coating	Full Polish
Sizes Included	5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4
Number of Points	12
Warranty	Mfr's Lifetime Warranty
Container Type	Molded Case
Additional Information	Double Box Ratcheting
PSC Code	5120

$129.25

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Material	Solid Carbide
Tolerance (Decimal Inch)	0.00000/-0.00004
Blank Number Wire Size	#7
Inner Diameter (Decimal Inch)	2.0808
Calibrated	Yes
Traceability Certification Included	NIST
Go/No Go	Go
Standards	B47.1 Gage Standards; ASME B89.1.6
UNSPSC Code	41111619

End Type	Hook
Outside Diameter (Decimal Inch - 4 Decimals)	1.0000
Spring Rate	8.3300
Material	Stainless Steel
Overall Length (Decimal Inch)	6.2300
Initial Tension (Lb.)	4.08
Maximum Extended Length (Decimal Inch)	10.9700
Free Length (Inch)	6
Inside Hook Length (Fractional Inch)	6
Standards	AMS 5688; ASTM A313
Finish/Coating	Uncoated
Wire Size (Decimal Inch)	0.1150
UNSPSC Code	31161907

ANSI Insert Code	SNMG434
ISO Insert Code	SNMG120416
Relief Angle	0
Insert Style	SNMG
Corner Radius (mm)	1.60
Corner Radius (Inch)	1/16
Corner Radius (Decimal Inch)	0.0625
Included Angle	90
Manufacturer Grade	MP7035
Coating/Finish	PVD
Insert Hand	Neutral
Insert Thickness (Inch)	3/16
Insert Thickness	4.76
Insert Thickness (Decimal Inch)	0.1875
Inscribed Circle (Decimal Inch)	0.5000
Inscribed Circle (Inch)	1/2
Inscribed Circle (mm)	12.70
Insert Material	Carbide
Insert Shape	S - Square
Chip Breaker Operation	Medium Machining; Roughing
Grade Characteristics	Stainless Steel (M) - High Toughness
Side Clearance	Negative
Number Of Cutting Edges	8
Insert Shape Code	S
Clearance Code	N
Tolerance Code	M
Primary Workpiece Material Code	M
Chip Breaker	RM
ANSI Size Code	434
ISO Size Code	120416
UNSPSC Code	23242105
Insert Size Code	4