4" Thick, Round Cross Section, Durometer 70

Item #: 16964082
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

Product Specifications
Cross Section Shape	Round
Material	Nitrile
Dash Number	431
System of Measurement	Inch
Durometer	70
Durometer (Shore A)	70A
Inside Diameter (Inch)	5-1/4
Inside Diameter (Decimal Inch)	5.2250
Outside Diameter (Inch)	5-3/4
Outside Diameter (Decimal Inch)	5.7750
Thickness (Inch)	1/4
Thickness (Decimal Inch)	0.2750
Maximum Temperature (F)	250.000
Minimum Temperature (F)	-40.000

Product Specifications

Cross Section Shape Round

Material Nitrile

Dash Number 431

System of Measurement Inch

Durometer 70

Durometer (Shore A) 70A

Inside Diameter (Inch) 5-1/4

Inside Diameter (Decimal Inch) 5.2250

Outside Diameter (Inch) 5-3/4

Outside Diameter (Decimal Inch) 5.7750

Thickness (Inch) 1/4

Thickness (Decimal Inch) 0.2750

Maximum Temperature (F) 250.000

Minimum Temperature (F) -40.000

$11.57

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 13/16" OD Viton O-Ring - 3/32" Thick, Square Cross Section, Durometer 75

Item #: 96991468
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Square cross-section shapes offer good high pressure seals, but are best used in static applications. They can be used as a direct replacement for a round O-ring.

Viton is a highly corrosion-resistant material used against petroleum fluids, diester lubricants, silicone fluids, phosphate esters, solvents and acids except for fuming nitric acids. It is especially good for hard vacuum services and low gas permeability. Not for use with acetates, ketones, methyl alcohol, brake fluids, hot water or steam.

Product Specifications
Cross Section Shape	Square
Material	Viton
Dash Number	114
System of Measurement	Inch
Durometer	75
Durometer (Shore A)	75A
Inside Diameter (Inch)	3/8
Inside Diameter (Decimal Inch)	0.6120
Outside Diameter (Inch)	13/16
Outside Diameter (Decimal Inch)	0.8180
Thickness (Inch)	3/32
Thickness (Decimal Inch)	0.1030
Maximum Temperature (F)	400.000

Product Specifications

Cross Section Shape Square

Material Viton

Dash Number 114

System of Measurement Inch

Durometer 75

Durometer (Shore A) 75A

Inside Diameter (Inch) 3/8

Inside Diameter (Decimal Inch) 0.6120

Outside Diameter (Inch) 13/16

Outside Diameter (Decimal Inch) 0.8180

Thickness (Inch) 3/32

Thickness (Decimal Inch) 0.1030

Maximum Temperature (F) 400.000

$14.92

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 16-1/2" ID x 25.6mm OD Nitrile O-Ring - 2.4mm Thick, Round Cross Section, Durometer 70

Item #: 16955726
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

Product Specifications
Cross Section Shape	Round
Material	Nitrile
System of Measurement	Metric
Durometer	70
Durometer (Shore A)	70A
Inside Diameter (Inch)	16-1/2
Outside Diameter (mm)	25.60
Thickness (mm)	2.40
Maximum Temperature (F)	250.000
Minimum Temperature (F)	-40.000

Product Specifications

Cross Section Shape Round

Material Nitrile

System of Measurement Metric

Durometer 70

Durometer (Shore A) 70A

Inside Diameter (Inch) 16-1/2

Outside Diameter (mm) 25.60

Thickness (mm) 2.40

Maximum Temperature (F) 250.000

Minimum Temperature (F) -40.000

$8.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 49mm OD Nitrile O-Ring - 5mm Thick, Round Cross Section, Durometer 70

Item #: 16964884
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

Product Specifications
Cross Section Shape	Round
Material	Nitrile
System of Measurement	Metric
Durometer	70
Durometer (Shore A)	70A
Outside Diameter (mm)	49.00
Thickness (mm)	5.00
Maximum Temperature (F)	250.000
Minimum Temperature (F)	-40.000

Product Specifications

Cross Section Shape Round

Material Nitrile

System of Measurement Metric

Durometer 70

Durometer (Shore A) 70A

Outside Diameter (mm) 49.00

Thickness (mm) 5.00

Maximum Temperature (F) 250.000

Minimum Temperature (F) -40.000

$10.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

KIPP - 3/8-16, Zinc Threaded Stud Adjustable Clamping Handle - 90mm OAL, 61.5mm High

Item #: 50044205
Brand: KIPP
Model #: K0116.3A43X25
Exact Tooling IR#: 04

Product Specifications
Connection Type	Threaded Stud
Thread Size	3/8-16
Overall Length (mm)	90.00
Handle Material	Zinc
Components Finish/Coating	Black Oxide
Handle Finish/Coating	Powder Coated
Components Material	Steel
Handle Type	Adjustable Handle
Handle Radius Length (Decimal Inch)	3.1102
Handle Arm Style	Ball End
Body Height (Decimal Inch)	1.4567
Body Diameter (mm)	22.00
Base Height (Decimal Inch)	0.3937
Base Diameter (Decimal Inch)	0.6299
Handle Arm Angle	20 Angle
Body Height (mm)	37.00
Body Diameter (Decimal Inch)	0.8661
Base Height (mm)	10.00
Base Diameter (mm)	16.00
Thread Length (Decimal Inch)	0.9843
Overall Height (mm)	61.50
Overall Height (Decimal Inch)	2.4213
Thread Length (mm)	25.00
Handle Radius Length (mm)	79.00
Handle Color	Silver

$13.25

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 290.7mm OD Nitrile O-Ring - 5.7mm Thick, Round Cross Section, Durometer 70

Item #: 96989967
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

Product Specifications
Cross Section Shape	Round
Material	Nitrile
System of Measurement	Metric
Durometer	70
Durometer (Shore A)	70A
Outside Diameter (mm)	290.70
Thickness (mm)	5.70
Maximum Temperature (F)	250.000
Minimum Temperature (F)	-40.000

Product Specifications

Cross Section Shape Round

Material Nitrile

System of Measurement Metric

Durometer 70

Durometer (Shore A) 70A

Outside Diameter (mm) 290.70

Thickness (mm) 5.70

Maximum Temperature (F) 250.000

Minimum Temperature (F) -40.000

$12.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

KIPP - #10-24, Aluminum Threaded Stud Adjustable Clamping Handle - 59mm OAL, 17mm High

Item #: 50068675
Brand: KIPP
Model #: K0005.05111A020
Exact Tooling IR#: 04

Product Specifications
Connection Type	Threaded Stud
Thread Size	#10-24
Overall Length (mm)	59.00
Handle Material	Aluminum
Components Finish/Coating	Black Oxide (Washer); Natural (Hinge Pin/Threaded Stud/Washer)
Handle Finish/Coating	Powder Coated
Components Material	Fiberglass-Reinforced Plastic (Washer); Stainless Steel
Handle Type	Adjustable Cam Lever
Handle Radius Length (Decimal Inch)	2.0591
Handle Arm Style	Modern Design / Teardrop End
Body Height (Decimal Inch)	0.6693
Base Diameter (Decimal Inch)	0.6102
Handle Arm Angle	Angled
Body Height (mm)	17.00
Base Diameter (mm)	15.50
Thread Length (Decimal Inch)	0.7874
Overall Height (mm)	17.00
Overall Height (Decimal Inch)	0.6693
Thread Length (mm)	20.00
Handle Radius Length (mm)	52.30
Handle Color	Black

$25.70

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Caplugs - Push-In Finishing Plugfor 3/4 SAE Thread - 0.681" ID, 0.95 OD, 0.29" Deep, Low-Density Polyethylene, Black

Item #: 33431727
Brand: Caplugs
Model #: 544001AB
Exact Tooling IR#: 04

Product Specifications
Style	Push-In
Inside Diameter (Decimal Inch)	0.6810
Outside Diameter (Decimal Inch)	0.9500
Depth (Decimal Inch)	0.2900
Compatible Thread Size (Inch)	3/4 SAE
Color	Black
Material	Low-Density Polyethylene

$617.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 3-1/8" OD Teflon O-Ring - 1/16" Thick, Round Cross Section, Durometer 55

Item #: 90715889
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

Product Specifications
Cross Section Shape	Round
Material	Teflon
Dash Number	041
System of Measurement	Inch
Durometer	55
Durometer (Shore A)	55D
Inside Diameter (Inch)	3
Inside Diameter (Decimal Inch)	2.9890
Outside Diameter (Inch)	3-1/8
Outside Diameter (Decimal Inch)	3.1290
Thickness (Inch)	1/16
Thickness (Decimal Inch)	0.0700
Maximum Temperature (F)	500.000

Product Specifications

Cross Section Shape Round

Material Teflon

Dash Number 041

System of Measurement Inch

Durometer 55

Durometer (Shore A) 55D

Inside Diameter (Inch) 3

Inside Diameter (Decimal Inch) 2.9890

Outside Diameter (Inch) 3-1/8

Outside Diameter (Decimal Inch) 3.1290

Thickness (Inch) 1/16

Thickness (Decimal Inch) 0.0700

Maximum Temperature (F) 500.000

$24.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Caplugs - 0.345" ID, Round Head, Static Dissipative Electrical Connector Cap - 0.585" OD, 17/32" Long, Low-Density Polyethylene, Black

Item #: 33441429
Brand: Caplugs
Model #: ZAS13811BY1
Exact Tooling IR#: 04

Product Specifications
Type	Electrical Connector Cap
Style	Round Head;Static Dissipative
Inside Diameter (Decimal Inch)	0.3450
Outside Diameter (Decimal Inch)	0.5850
Length (Inch)	17/32
Material	Low-Density Polyethylene
Color	Black

$327.01

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 310.7mm OD Nitrile O-Ring - 5.7mm Thick, Round Cross Section, Durometer 70

Item #: 96990353
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

Product Specifications
Cross Section Shape	Round
Material	Nitrile
System of Measurement	Metric
Durometer	70
Durometer (Shore A)	70A
Outside Diameter (mm)	310.70
Thickness (mm)	5.70
Maximum Temperature (F)	250.000
Minimum Temperature (F)	-40.000

Product Specifications

Cross Section Shape Round

Material Nitrile

System of Measurement Metric

Durometer 70

Durometer (Shore A) 70A

Outside Diameter (mm) 310.70

Thickness (mm) 5.70

Maximum Temperature (F) 250.000

Minimum Temperature (F) -40.000

$13.30

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 5" ID x 77mm OD Nitrile O-Ring - 2mm Thick, Round Cross Section, Durometer 70

Item #: 96996707
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

Product Specifications
Cross Section Shape	Round
Material	Nitrile
System of Measurement	Metric
Durometer	70
Durometer (Shore A)	70A
Inside Diameter (Inch)	5
Outside Diameter (mm)	77.00
Thickness (mm)	2.00
Maximum Temperature (F)	250.000
Minimum Temperature (F)	-40.000

Product Specifications

Cross Section Shape Round

Material Nitrile

System of Measurement Metric

Durometer 70

Durometer (Shore A) 70A

Inside Diameter (Inch) 5

Outside Diameter (mm) 77.00

Thickness (mm) 2.00

Maximum Temperature (F) 250.000

Minimum Temperature (F) -40.000

$15.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 3/4" OD Viton O-Ring - 1/16" Thick, Round Cross Section, Durometer 75

Item #: 11253572
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

Viton is a highly corrosion-resistant material used against petroleum fluids, diester lubricants, silicone fluids, phosphate esters, solvents and acids except for fuming nitric acids. It is especially good for hard vacuum services and low gas permeability. Not for use with acetates, ketones, methyl alcohol, brake fluids, hot water or steam.

Product Specifications
Cross Section Shape	Round
Material	Viton
Dash Number	016
System of Measurement	Inch
Durometer	75
Durometer (Shore A)	75A
Inside Diameter (Inch)	3/8
Inside Diameter (Decimal Inch)	0.6140
Outside Diameter (Inch)	3/4
Outside Diameter (Decimal Inch)	0.7540
Thickness (Inch)	1/16
Thickness (Decimal Inch)	0.0700
Maximum Temperature (F)	400.000

Product Specifications

Cross Section Shape Round

Material Viton

Dash Number 016

System of Measurement Inch

Durometer 75

Durometer (Shore A) 75A

Inside Diameter (Inch) 3/8

Inside Diameter (Decimal Inch) 0.6140

Outside Diameter (Inch) 3/4

Outside Diameter (Decimal Inch) 0.7540

Thickness (Inch) 1/16

Thickness (Decimal Inch) 0.0700

Maximum Temperature (F) 400.000

$195.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 56mm ID, Viton O-Ring - 1.5mm Thick, Round Cross Section

Item #: 47408653
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Round cross-section shapes can be used in both static and dynamic applications. They are used as a mechanical seal or gasket and are seated in a groove and compressed during assembly between two or more parts.

Viton is a highly corrosion-resistant material used against petroleum fluids, diester lubricants, silicone fluids, phosphate esters, solvents and acids except for fuming nitric acids. It is especially good for hard vacuum services and low gas permeability. Not for use with acetates, ketones, methyl alcohol, brake fluids, hot water or steam.

Product Specifications
Cross Section Shape	Round
Material	Viton
System of Measurement	Metric
Durometer (Shore A)	75A
Inside Diameter (mm)	56.00
Thickness (mm)	1.50
Maximum Temperature (F)	400.000
Minimum Temperature (F)	-15
Number of Pieces	5

Product Specifications

Cross Section Shape Round

Material Viton

System of Measurement Metric

Durometer (Shore A) 75A

Inside Diameter (mm) 56.00

Thickness (mm) 1.50

Maximum Temperature (F) 400.000

Minimum Temperature (F) -15

Number of Pieces 5

$10.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Caplugs - Round Head Cap - 5.18" OD, 1-3/8" Long, Vinyl, Blue

Item #: 33463951
Brand: Caplugs
Model #: AD09A17A
Exact Tooling IR#: 04

Product Specifications
Type	Cap
Style	Round Head
Outside Diameter (Decimal Inch)	5.1800
Length (Inch)	1-3/8
Material	Vinyl
Color	Blue

$719.23

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Caplugs - 2.38" ID, Round Head, Static Dissipative Electrical Connector Cap - 2.6" OD, 11/16" Long, Low-Density Polyethylene, Black

Item #: 33439548
Brand: Caplugs
Model #: ZAS13877BQ1
Exact Tooling IR#: 04

Product Specifications
Type	Electrical Connector Cap
Style	Round Head;Static Dissipative
Inside Diameter (Decimal Inch)	2.3800
Outside Diameter (Decimal Inch)	2.6000
Length (Inch)	11/16
Material	Low-Density Polyethylene
Color	Black

$440.73

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

KIPP - M8, Zinc Threaded Stud Adjustable Clamping Handle - 91mm OAL, 58.5mm High

Item #: 50087121
Brand: KIPP
Model #: K0122.3083X15
Exact Tooling IR#: 04

Product Specifications
Connection Type	Threaded Stud
Thread Size	M8
Overall Length (mm)	91.00
Handle Material	Zinc
Components Finish/Coating	Black Oxide
Handle Finish/Coating	Powder Coated
Components Material	Steel
Handle Type	Adjustable Handle
Handle Radius Length (Decimal Inch)	3.1496
Handle Arm Style	Modern Design / Teardrop End
Body Height (Decimal Inch)	1.4567
Body Diameter (mm)	22.00
Base Height (Decimal Inch)	0.3937
Base Diameter (Decimal Inch)	0.6299
Handle Arm Angle	Angled
Body Height (mm)	37.00
Body Diameter (Decimal Inch)	0.8661
Base Height (mm)	10.00
Base Diameter (mm)	16.00
Thread Length (Decimal Inch)	0.5906
Overall Height (mm)	58.50
Overall Height (Decimal Inch)	2.3032
Thread Length (mm)	15.00
Handle Radius Length (mm)	80.00
Handle Color	Silver

$10.78

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Thread Forming Tap: M8x1.25 Metric, 6HX Class of Fit, Bottoming Chamfer, High-Speed Steel-E-PM, TiCN Finish

Item #: 55401343
Brand: Walter-Prototyp
Model #: 7958090

Product Specifications

Thread Size (mm) M8x1.25

Thread Standard Metric

Chamfer Bottoming

Chamfered Threads 1.5-2P

Material High-Speed Steel-E-PM

Coating/Finish TiCN

Coolant Through Yes

Class Of Fit 6HX

Thread Limit H9

Overall Length (Decimal Inch) 3.5433

Overall Length (mm) 90.0000

Thread Direction Right Hand

Thread Length (Inch) 0.4724

Thread Length (mm) 12.00

Shank Diameter (Decimal Inch) 0.3150

Shank Diameter (mm) 8.0000

Square Length (Decimal Inch) 0.3543

Square Length (mm) 9.00

Application Threading

Series TC420

Tapping Depth (Decimal Inch) 1.3780

Tapping Depth (mm) 35.00

Square Size (Decimal Inch) 0.2441

Square Size (mm) 6.20

Number Of Flutes 5

UNSPSC Code 23241600

$149.49

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

FlexC 65 Quick-Change Collet 52mm Round Smooth

Item #: 52392628
Brand: Forkhardt Hardinge
Model #: C0650017520000

Product Specifications

Collet System Quick Change

Collet Series Flex C

Size (mm) 52

Minimum Collet Capacity (Decimal Inch) 2.0272

Maximum Collet Capacity (Decimal Inch) 2.0672

Material Heat Treated Alloy Steel

TIR (Decimal Inch) 0.000400

Maximum Grip (Decimal Inch) 2.0672

Minimum Grip (Decimal Inch) 2.0272

Thickness (Inch) 2-1/64

Number Of Pieces 1

Variable Diameter Reamer Type None

UNSPSC Code 27112808

$349.57

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

KIPP - M10, Zinc Threaded Stud Adjustable Clamping Handle - 108mm OAL, 72mm High

Item #: 50044346
Brand: KIPP
Model #: K0116.4103X60
Exact Tooling IR#: 04

Product Specifications
Connection Type	Threaded Stud
Thread Size	M10
Overall Length (mm)	108.00
Handle Material	Zinc
Components Finish/Coating	Black Oxide
Handle Finish/Coating	Powder Coated
Components Material	Steel
Handle Type	Adjustable Handle
Handle Radius Length (Decimal Inch)	3.7402
Handle Arm Style	Ball End
Body Height (Decimal Inch)	1.6732
Body Diameter (mm)	26.00
Base Height (Decimal Inch)	0.3937
Base Diameter (Decimal Inch)	0.7480
Handle Arm Angle	20 Angle
Body Height (mm)	42.50
Body Diameter (Decimal Inch)	1.0236
Base Height (mm)	10.00
Base Diameter (mm)	19.00
Thread Length (Decimal Inch)	2.3622
Overall Height (mm)	72.00
Overall Height (Decimal Inch)	2.8347
Thread Length (mm)	60.00
Handle Radius Length (mm)	95.00
Handle Color	Silver

$14.55

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Thread Size (mm)	M8x1.25
Thread Standard	Metric
Chamfer	Bottoming
Chamfered Threads	1.5-2P
Material	High-Speed Steel-E-PM
Coating/Finish	TiCN
Coolant Through	Yes
Class Of Fit	6HX
Thread Limit	H9
Overall Length (Decimal Inch)	3.5433
Overall Length (mm)	90.0000
Thread Direction	Right Hand
Thread Length (Inch)	0.4724
Thread Length (mm)	12.00
Shank Diameter (Decimal Inch)	0.3150
Shank Diameter (mm)	8.0000
Square Length (Decimal Inch)	0.3543
Square Length (mm)	9.00
Application	Threading
Series	TC420
Tapping Depth (Decimal Inch)	1.3780
Tapping Depth (mm)	35.00
Square Size (Decimal Inch)	0.2441
Square Size (mm)	6.20
Number Of Flutes	5
UNSPSC Code	23241600

Collet System	Quick Change
Collet Series	Flex C
Size (mm)	52
Minimum Collet Capacity (Decimal Inch)	2.0272
Maximum Collet Capacity (Decimal Inch)	2.0672
Material	Heat Treated Alloy Steel
TIR (Decimal Inch)	0.000400
Maximum Grip (Decimal Inch)	2.0672
Minimum Grip (Decimal Inch)	2.0272
Thickness (Inch)	2-1/64
Number Of Pieces	1
Variable Diameter Reamer Type	None
UNSPSC Code	27112808