Lighting & Electrical > Wire Management (ET04) - (3167 Products)
Hubbell Wiring Device-Kellems - 0.5 to 0.62" General Straight Strain Relief Cord Grip
Item #: 31184625
Brand: Hubbell Wiring Device-Kellems
Model #: SHC1039CR
Product Specifications
Shape
Straight
Conduit Type
General
Maximum Cable Capacity (Decimal Inch)
0.6200
Minimum Cable Capacity (Decimal Inch)
1/2
Thread Size
1 NPT
Material
Nylon
Ingress Protection Rating
IP66 When Used w/Optional Metal Clad O-Ring
Overall Length (Decimal Inch)
1.8800
Thread Type
NPT
Standards Met
UL Listed to Type 4, 4X, 12 and 13; CSA Certified
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 1″ Dia. × 3″ LOC × 1″ Shank Dia. × 6″ OAL, 4 FL, Carbide, AlTiN
Item #: TA15TC18664
Brand: Titan USA
Model #: TC18664
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Usable Length (LU) | 3″ |
| Depth of Cut Maximum (APMX) | 3″ |
| Corner Radius (RE) | 1/2″ |
| Overall Length (OAL) | 6″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiAlN |
| Center Cutting | Yes |
| Flute Count (NOF) | 4 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Chucking Reamer; 13/32″ Dia. × 0.3105″ Shank Dia. × 7″ OAL, 6 Flutes, HSS, Uncoated
Item #: TA15TR96685
Brand: Titan USA
Model #: TR96685
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 13/32″ |
| Coating | Uncoated |
| Usable Length (LU) | 1-3/4″ |
| Cutting Edge Material | HSS |
| Cutting Edge Length (L) | 1-3/4″ |
| Measurement Type | Inch |
| Connection Diameter Machine Side (DCONMS) | 0.3105″ |
| Tool Type | Reamer |
| Flute Count (NOF) | 6 |
| Decimal Equivalent | 0.4063″ |
| Overall Length (OAL) | 7″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 1/16″ Dia. × 0.186″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, AlTiN
Item #: TA15TC58821
Brand: Titan USA
Model #: TC58821
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 1/2″ |
| Depth of Cut Maximum (APMX) | 0.186″ |
| Corner Radius (RE) | 0.031″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.0625″ |
| Coating | TiAlN |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.3439 ST FL RHC REAMER
Item #: MW205000003439
Brand: Monster Tool Company
Model #: 500-0003439
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.3439″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/4″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/4″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.3439″ |
| Decimal Equivalent | 0.3439″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3-1/2″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.3440 ST FL RHC REAMER
Item #: MW205000003440
Brand: Monster Tool Company
Model #: 500-0003440
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.344″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/4″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/4″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.344″ |
| Decimal Equivalent | 0.344″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3-1/2″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4-2FL-SE-EXT-X/LG 1-1/2x6
Item #: MW21216001084
Brand: Monster Tool Company
Model #: 216-001084
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Applicable Material | | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 6″ |
| Length Group | Extended Extra Long |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.75″ |
| Coating | Bright |
| Series/List # | 216 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Checkers - On Floor Cable Covers Cover Material: Polyurethane Number of Channels: 1
Item #: 31804214
Brand: Checkers
Model #: FL1X4-OProduct Specifications
Cover Material
Polyurethane
Number of Channels
1
Color
Orange
Overall Length (Feet)
36
Maximum Compatible Cable Diameter (Inch)
4
Overall Width (Inch)
10-3/4
Overall Height (Inch)
1-1/2
Channel Width (Inch)
10-3/4
Channel Height (Inch)
1-1/2
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/16-60° 4FL DE CARB CNSK w/ DRILL PT
Item #: MW18334304050
Brand: Monster Tool Company
Model #: 334-304050
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 2-1/8″ |
| Angle | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Series/List # | 334 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 60 Degrees |
| End Shape | Drill Point |
| Coating | Bright |
| Single / Double End | Double End |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.3125″ |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium |
| Application | Countersinking |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2-4FL FUSION-MED 1-1/2x4 w/.030R AlTiCrN
Item #: MW21284000676
Brand: Monster Tool Company
Model #: 284-000676
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Radius (RE) | 0.03″ |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 4″ |
| Length Group | Medium |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.5″ |
| Coating | AlTiCrN |
| Series/List # | 284 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | Variable |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2-4FL FUSION-MED 1-1/2x4 w/.045R
Item #: MW21284000677
Brand: Monster Tool Company
Model #: 284-000677
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Radius (RE) | 0.045″ |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 4″ |
| Length Group | Medium |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.5″ |
| Coating | Bright |
| Series/List # | 284 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | Variable |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/32 CARB STUB DRILL
Item #: MW23460102188
Brand: Monster Tool Company
Model #: 460-102188
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 7/32″ |
| Cutting Edge Material | Solid Tungsten Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 7/32″ |
| Tool Type | Drill |
| Decimal Equivalent | 0.2188″ |
| Grade | C-2 Sub-Micron |
| Length Group | Short/Stub |
| Point Shape | Drill Point |
| Coating | Bright |
| Measurement Type | Inch |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Series/List # | 460 |
| Application | | Drilling | |
| Length Chip Flute (LCF) | 1-1/4″ |
| Connection Diameter Machine Side (DCONMS) | 7/32″ |
| Overall Length (OAL) | 2-3/8″ |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 135 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 1-1/4″ |
| Single / Double End | Single End |
| Flute Helix Angle (FHA) | 15 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/32 CARB STUB DRILL TiN
Item #: MW23460102188A
Brand: Monster Tool Company
Model #: 460-102188A
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 7/32″ |
| Cutting Edge Material | Solid Tungsten Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 7/32″ |
| Tool Type | Drill |
| Decimal Equivalent | 0.2188″ |
| Grade | C-2 Sub-Micron |
| Length Group | Short/Stub |
| Point Shape | Drill Point |
| Coating | TiN |
| Measurement Type | Inch |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Series/List # | 460 |
| Application | | Drilling | |
| Length Chip Flute (LCF) | 1-1/4″ |
| Connection Diameter Machine Side (DCONMS) | 7/32″ |
| Overall Length (OAL) | 2-3/8″ |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 135 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 1-1/4″ |
| Single / Double End | Single End |
| Flute Helix Angle (FHA) | 15 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/16-2FL-SE-REG w/.045R AlTiN
Item #: MW21204602989
Brand: Monster Tool Company
Model #: 204-602989
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/16″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 7/16″ |
| Corner Radius (RE) | 0.045″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 2-3/4″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.4375″ |
| Coating | AlTiN |
| Series/List # | 204 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/16-2FL-SE-REG w/.045R TiCN
Item #: MW21204602988
Brand: Monster Tool Company
Model #: 204-602988
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/16″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 7/16″ |
| Corner Radius (RE) | 0.045″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 2-3/4″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.4375″ |
| Coating | TiCN |
| Series/List # | 204 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/16-2FL-SE-REG w/.045R TiN
Item #: MW21204602987
Brand: Monster Tool Company
Model #: 204-602987
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/16″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 7/16″ |
| Corner Radius (RE) | 0.045″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 2-3/4″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.4375″ |
| Coating | TiN |
| Series/List # | 204 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.332″ Dia. × 0.332″ Shank Dia. × 3″ OAL × 1-3/8″ LCF, 140 Degrees, 2 Flute, TiAlN, Solid Carbide Drills
Item #: TA15TC79617
Brand: Titan USA
Model #: TC79617
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 0.332″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 0.332″ |
| Measurement Type | Inch |
| Coating | TiAlN |
| Usable Length (LU) | 1-3/8″ |
| Connection Diameter Machine Side (DCONMS) | 0.332″ |
| Length Chip Flute (LCF) | 1-3/8″ |
| Point Angle (SIG) | 140 Degrees |
| Overall Length (OAL) | 3″ |
| Functional Length (LF) | 1-3/8″ |
| Flute Count (NOF) | 2 |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.332″ Dia. × 0.332″ Shank Dia. × 3″ OAL × 1-3/8″ LCF, 140 Degrees, 2 Flute, Uncoated, Solid Carbide Drills
Item #: TA15TC19617
Brand: Titan USA
Model #: TC19617
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 0.332″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 0.332″ |
| Measurement Type | Inch |
| Coating | Uncoated |
| Usable Length (LU) | 1-3/8″ |
| Connection Diameter Machine Side (DCONMS) | 0.332″ |
| Length Chip Flute (LCF) | 1-3/8″ |
| Point Angle (SIG) | 140 Degrees |
| Overall Length (OAL) | 3″ |
| Functional Length (LF) | 1-3/8″ |
| Flute Count (NOF) | 2 |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.332″ Dia. × 0.332″ Shank Dia. × 4″ OAL × 2-1/2″ LCF, 118 Degrees, 2 Flute, TiAlN, Solid Carbide Drills
Item #: TA15TC79117
Brand: Titan USA
Model #: TC79117
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 0.332″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 0.332″ |
| Measurement Type | Inch |
| Coating | TiAlN |
| Usable Length (LU) | 2-1/2″ |
| Connection Diameter Machine Side (DCONMS) | 0.332″ |
| Length Chip Flute (LCF) | 2-1/2″ |
| Point Angle (SIG) | 118 Degrees |
| Overall Length (OAL) | 4″ |
| Functional Length (LF) | 2-1/2″ |
| Flute Count (NOF) | 2 |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.332″ Dia. × 0.332″ Shank Dia. × 4″ OAL × 2-1/2″ LCF, 118 Degrees, 2 Flute, Uncoated, Solid Carbide Drills
Item #: TA15TC19117
Brand: Titan USA
Model #: TC19117
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 0.332″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 0.332″ |
| Measurement Type | Inch |
| Coating | Uncoated |
| Usable Length (LU) | 2-1/2″ |
| Connection Diameter Machine Side (DCONMS) | 0.332″ |
| Length Chip Flute (LCF) | 2-1/2″ |
| Point Angle (SIG) | 118 Degrees |
| Overall Length (OAL) | 4″ |
| Functional Length (LF) | 2-1/2″ |
| Flute Count (NOF) | 2 |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It