Motion Control & Fluid Power > Shock Absorbers & Springs (ET04) - (42556 Products)
Brand: Made in USA / Part #: E-032-250-1500S
Item #: 04075834
Brand: Made in USA
Model #: E-032-250-1500S
Product Specifications
| Outside Diameter (Inch) | 1/4 |
| Outside Diameter (Decimal Inch - 4 Decimals) | 0.2500 |
| Spring Rate | 5.4000 |
| Material | Stainless Steel |
| Overall Length (Decimal Inch) | 1.5000 |
| Overall Length (Inch) | 1-1/2 |
| Initial Tension (Lb.) | 1.1700 |
| Maximum Extended Length (Decimal Inch) | 5.5700 |
| Free Length (Inch) | 1-1/2 |
| Number Of Pieces | 10 |
| Maximum Work Load (Lb.) | 5.2100 |
| Wire Size (Decimal Inch) | 0.0320 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Associated Spring Raymond / Part #: C1234-148-5250M
Item #: 16051138
Brand: Associated Spring Raymond
Model #: C1234-148-5250M
Product Specifications
| End Type | Ground |
| Material | Music Wire |
| Outside Diameter (Decimal Inch - 4 Decimals) | 1.2340 |
| Solid Height (Decimal Inch) | 2.4850 |
| Free Length (Inch) | 5-1/4 |
| Free Length (Decimal Inch) | 5.2500 |
| Spring Rate | 38.4940 |
| Wire Size (Decimal Inch) | 0.1480 |
| Maximum Work Load (Lb.) | 94.3560 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.04″ Dia. × 1-1/2″ OAL, 140 Degrees, Carbide, Uncoated, Miniature Drills - Spotting Drills
Item #: GE90815840
Brand: Harvey Tool
Model #: 815840
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 0.04″ |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 0.04″ |
| Flute Length | 0.06″ |
| Point Angle (SIG) | 140 Degrees |
| Measurement Type | Inch |
| Angle | 140 Degrees |
| Length Group | 1.5D |
| Protruding Length (LPR) | 0.06″ |
| Cutting Direction (HAND) | Right Hand |
| Flute Count (NOF) | 2 |
| Cutting Length | 0.06″ |
| Overall Length (OAL) | 1-1/2″ |
| Body Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Length Chip Flute (LCF) | 0.06″ |
| Shank Type | Round |
| Single / Double End | Single End |
| Coating | Uncoated |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7.6 mm Dia. × 8 mm Shank × 61 mm Usable Length × 110 mm OAL, 8xD, 140 Degree, AlTiN, 2 Flute, Coolant Through, HP Patriot Solid Carbide Drill
Item #: AV41928000626
Brand: Keo
Model #: 928-000-626
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 7.6 mm |
| Functional Length (LF) | 72 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 7.6 mm |
| Measurement Type | Metric |
| Length Group | 8xD |
| Usable Length (LU) | 61 mm |
| Coating | TiAlN |
| Overall Length (OAL) | 110 mm |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Flute Count (NOF) | 2 |
| Coolant Supply Property (CSP) | Coolant Thru |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 140 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
TDX270F32-5
Item #: TG256718401
Brand: Tungaloy
Model #: 6718401
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 27 mm |
| Functional Length (LF) | 159 mm |
| Usable Length (LU) | 135.7 mm |
| Overall Length (OAL) | 218.7 mm |
| Application | | General Drilling | |
| Flange Diameter (DF) | 40 mm |
| Connection Diameter Machine Side (DCONMS) | 32 mm |
| Point Length (PL) | 0.73 mm |
| Tool Type | Indexable Insert Drills |
| Measurement Type | Metric |
| Shank Length (LS) | 59 mm |
| Master Insert Identification (MIID) | XPMT08T308R-DJ |
| Length Chip Flute (LCF) | 139.7 mm |
| Body Material | Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
YBB1190R01 IN2005
Item #: IC045100297
Brand: Ingersoll
Model #: 5100297
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.469″ |
| Measurement Type | Inch |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Non Ferrous Metals | Hi Temp Alloys | |
| Point Angle (SIG) | 140 Degrees |
| Grade | IN2005 |
| Coating | TiAlN |
| Insert Seat Size Code (SSC) | 11 |
| Body Material | Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Made in USA / Part #: E-047-375-2000
Item #: 06814487
Brand: Made in USA
Model #: E-047-375-2000
Product Specifications
| Outside Diameter (Inch) | 3/8 |
| Outside Diameter (Decimal Inch - 4 Decimals) | 0.3750 |
| Spring Rate | 7.7600 |
| Overall Length (Inch) | 2 |
| Initial Tension (Lb.) | 2.2500 |
| Maximum Extended Length (Decimal Inch) | 3.3000 |
| Free Length (Inch) | 2 |
| Maximum Work Load (Lb.) | 12.4200 |
| Wire Size (Decimal Inch) | 0.0470 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.02″ Dia. × 1-1/2″ OAL, 140 Degrees, Carbide, AlTiN, Miniature Drills - Spotting Drills
Item #: GE90815820C3
Brand: Harvey Tool
Model #: 815820-C3
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 0.02″ |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 0.02″ |
| Flute Length | 0.03″ |
| Point Angle (SIG) | 140 Degrees |
| Measurement Type | Inch |
| Angle | 140 Degrees |
| Length Group | 1.5D |
| Protruding Length (LPR) | 0.03″ |
| Cutting Direction (HAND) | Right Hand |
| Flute Count (NOF) | 2 |
| Cutting Length | 0.03″ |
| Overall Length (OAL) | 1-1/2″ |
| Body Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Length Chip Flute (LCF) | 0.03″ |
| Shank Type | Round |
| Single / Double End | Single End |
| Coating | AlTiN |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8X5/32X3 3FL ZPLUS_SQ
Item #: HS1081566
Brand: Helical Solutions
Model #: 81566
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Neck Diameter (DN) | 0.118″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Neck Length (LN) | 0.844″ |
| Depth of Cut Maximum (APMX) | 0.1562″ |
| Length Group | 1D |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.125″ |
| Coating | ZPLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 2″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 4171539
Item #: 94062254
Brand: Widia
Model #: 4171539
Product Specifications
| Insert Style | SNMG |
| Insert Shape Code | S |
| Insert Size Code | 642 |
| Insert Shape | Square |
| Coating/Finish | TiCN; TiN; ZrCN; Al2O3 |
| Manufacturer Grade | WP25CT |
| Corner Radius (Decimal Inch) | 0.0315 |
| Insert Material | Carbide |
| Hole Diameter (Decimal Inch) | 0.3122 |
| Maximum Depth of Cut (Decimal Inch) | 0.3750 |
| Inscribed Circle (Decimal Inch) | 0.7500 |
| Insert Holding Method | Clamp |
| Insert Hand | Neutral |
| Insert Thickness (Decimal Inch) | 0.2500 |
| Clearance Code | N |
| Tolerance Code | M |
| Included Angle | 90.00 |
| Relief Angle | 0.000 |
| Series | SNMG |
| Coating Process | MTCVD |
| Rake | Negative |
| Wiper Edge | No |
| Insert Length (Decimal Inch) | 0.7500 |
| Number Of Cutting Edges | 8 |
| Primary Workpiece Material | Steel |
| Primary Workpiece Material Code | P |
| Secondary Workpiece Material | Cast Iron |
| Secondary Workpiece Material Code | K |
| Ansi Code | SNMG642RH |
| Iso Code | SNMG190608RH |
| Manufacturers Catalog Number | SNMG642RH |
| Cutting Direction | Neutral |
| Coating Classification | Multi-Layered CVD |
| Chip Breaker | RH |
| Style | SNMG |
| Width (Decimal Inch - 4 Decimals) | 0.7500 |
| Multi-Use Tool | Yes |
| Full Radius | No |
| Multi-Use Application | External Turning; Internal Turning |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8X5/32X3 3FL_ZPLUS
Item #: HS1081376
Brand: Helical Solutions
Model #: 81376
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Neck Diameter (DN) | 0.118″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Neck Length (LN) | 0.469″ |
| Depth of Cut Maximum (APMX) | 0.1562″ |
| Length Group | 1D |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.125″ |
| Coating | ZPLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 2.375″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3 1/4″ Bore Diameter × 3 1/2″ Hone Length × 13.5″ Overall Length, 600 Grit, Aluminum Oxide - Standard Duty Flex-Hone
Item #: MJ73GB314600AO
Brand: Brush Research
Model #: GB314600AO
| Product Specifications | |
|---|---|
| Type | Standard Duty Flex-Hone |
| Hone Length | 3 1/2″ |
| Abrasive Material | Aluminum Oxide |
| Overall Length | 13.5″ |
| Grit | 600 |
| Specification | Non-ferrous Materials |
| Bore Diameter | 3 1/4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3 1/4″ Bore Diameter × 3 1/2″ Hone Length × 13.5″ Overall Length, 600 Grit, Boron Carbide - Standard Duty Flex-Hone
Item #: MJ73GB314600BC
Brand: Brush Research
Model #: GB314600BC
| Product Specifications | |
|---|---|
| Type | Standard Duty Flex-Hone |
| Hone Length | 3 1/2″ |
| Abrasive Material | Boron Carbide |
| Overall Length | 13.5″ |
| Grit | 600 |
| Specification | Tough Ferrous Materials |
| Bore Diameter | 3 1/4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3 1/4″ Bore Diameter × 3 1/2″ Hone Length × 13.5″ Overall Length, 60 Grit, Zirconia Alumina #1525 - Standard Duty Flex-Hone
Item #: MJ73GB31460Z25
Brand: Brush Research
Model #: GB31460Z25
| Product Specifications | |
|---|---|
| Type | Standard Duty Flex-Hone |
| Hone Length | 3 1/2″ |
| Abrasive Material | Zirconia Alumina #1525 |
| Overall Length | 13.5″ |
| Grit | 60 |
| Specification | Ferrous Materials - Maximum Life |
| Bore Diameter | 3 1/4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Chamfer End Mill; 16 mm Dia. × 32 mm LOC × 16 mm Shank Dia. × 92 mm OAL ; 2 FL ; Carbide ; GLT ; Series 2549K
Item #: ER452549K016
Brand: EMUGE-FRANKEN
Model #: 2549K.016
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 16 mm |
| End Shape | Chamfer |
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| Application | | Soft Materials Roughing | |
| Depth of Cut Maximum (APMX) | 32 mm |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 92 mm |
| Decimal Equivalent | 0.6299″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Metric |
| Coating | GLT |
| Series/List # | 2549K |
| Flute Count (NOF) | 2 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8X5/32X3 4FL 0.010CR
Item #: HS1081685
Brand: Helical Solutions
Model #: 81685
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Corner Radius (RE) | 0.01″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Neck Diameter (DN) | 0.118″ |
| Depth of Cut Maximum (APMX) | 0.1562″ |
| Neck Length (LN) | 0.594″ |
| Overall Length (OAL) | 3″ |
| Length Group | 1D |
| Coating | APLUS |
| Decimal Equivalent | 0.125″ |
| Flute Count (NOF) | 4 |
| Measurement Type | Inch |
| Applicable Material | | Steel | |
| Shank Length (LS) | 2.25″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8X5/8X2 1/2 5FL APLUS
Item #: HS1081702
Brand: Helical Solutions
Model #: 81702
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Length Group | 5D |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Decimal Equivalent | 0.125″ |
| Overall Length (OAL) | 2-1/2″ |
| Measurement Type | Inch |
| Coating | APLUS |
| Shank Length (LS) | 1.875″ |
| Flute Count (NOF) | 5 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 4167117
Item #: 95156352
Brand: Widia
Model #: 4167117
Product Specifications
| Insert Style | TNMG |
| Insert Shape Code | T |
| Insert Size Code | 431 |
| Insert Shape | Triangle |
| Coating/Finish | TiCN; TiN; Al2O3 |
| Manufacturer Grade | TN20P |
| Corner Radius (Decimal Inch) | 0.0157 |
| Insert Material | Carbide |
| Hole Diameter (Decimal Inch) | 0.2031 |
| Maximum Depth of Cut (Decimal Inch) | 0.4331 |
| Inscribed Circle (Decimal Inch) | 0.5000 |
| Insert Holding Method | Clamp |
| Insert Hand | Neutral |
| Insert Thickness (Decimal Inch) | 0.1875 |
| Clearance Code | N |
| Tolerance Code | M |
| Included Angle | 60.00 |
| Relief Angle | 0.000 |
| Series | TNMG |
| Coating Process | MTCVD |
| Rake | Negative |
| Wiper Edge | No |
| Insert Length (Decimal Inch) | 0.8661 |
| Number Of Cutting Edges | 6 |
| Secondary Workpiece Material | Cast Iron; Steel |
| Secondary Workpiece Material Code | P; K |
| Ansi Code | TNMG4316P |
| Iso Code | TNMG2204046P |
| Manufacturers Catalog Number | TNMG4316P |
| Cutting Direction | Neutral |
| Coating Classification | Multi-Layered CVD |
| Chip Breaker | 6P |
| Style | TNMG |
| Width (Decimal Inch - 4 Decimals) | 0.5000 |
| Multi-Use Tool | Yes |
| Full Radius | No |
| Multi-Use Application | External Turning; Internal Turning |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4″ Diameter × 3/8″ Shank Diameter × 3/4″ Trim Length, 0.040″ Abrasive Impregnated Bristle, Ceramic, AEB (Abrasive End Brush)
Item #: MJ74AEB343480
Brand: Brush Research
Model #: AEB343480
| Product Specifications | |
|---|---|
| Diameter | 3/4″ |
| Bristle Diameter | 0.040″ |
| Shank Diameter | 3/8″ |
| Trim Length | 3/4″ |
| Material | Ceramic |
| Maximum RPM | 10,000 |
| Bristle Type | Abrasive Impregnated |
| Grit | 80 |
| Style | AEB (Abrasive End Brush) |
| Overall Length | 5″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8X5/32X3 3FL_SQ EM
Item #: HS1081467
Brand: Helical Solutions
Model #: 81467
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Neck Diameter (DN) | 0.118″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Neck Length (LN) | 0.844″ |
| Depth of Cut Maximum (APMX) | 0.1562″ |
| Length Group | 1D |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.125″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 2″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It