Magafor - 8.7mm Solid Carbide Chucking Reamer

Item #: 95431524
Brand: Magafor
Model #: 88867008700

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Spiral flute reamers are used in blind and through-hole operations. They are used to bridge interrupted cuts.

Product Specifications

Reamer Diameter (mm) 8.70

Reamer Diameter (Decimal Inch) 0.3425

Reamer Material Solid Carbide

Shank Type Straight

Flute Type Spiral

Overall Length (mm) 71.00

Overall Length (Decimal Inch) 2.8000

Flute Length (mm) 25.00

Flute Length (Decimal Inch) 0.9840

Maximum Shank Diameter (mm) 8.00

Maximum Shank Diameter (Decimal Inch) 0.3150

Spiral Direction Right Hand

Cutting Direction Right Hand

Reamer Diameter Tolerance (mm) H7 (Hole)

Through Coolant Yes

Additional Information DIN 8089-C; For Blind Hole

Product Specifications
Reamer Diameter (mm)	8.70
Reamer Diameter (Decimal Inch)	0.3425
Reamer Material	Solid Carbide
Shank Type	Straight
Flute Type	Spiral
Overall Length (mm)	71.00
Overall Length (Decimal Inch)	2.8000
Flute Length (mm)	25.00
Flute Length (Decimal Inch)	0.9840
Maximum Shank Diameter (mm)	8.00
Maximum Shank Diameter (Decimal Inch)	0.3150
Spiral Direction	Right Hand
Cutting Direction	Right Hand
Reamer Diameter Tolerance (mm)	H7 (Hole)
Through Coolant	Yes
Additional Information	DIN 8089-C; For Blind Hole

$184.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Alvord Polk - 55/64" High Speed Steel 8 Flute Chucking Reamer

Item #: 06668123
Brand: Alvord Polk
Model #: 00411

Features and Benefits

High speed steel (HSS) provides good wear resistance and can be used in general purpose applications for both ferrous and nonferrous materials.

Straight flute reamers are the most common and are used in general purpose though-hole applications. They are used for reaming holes without interrupted cuts.

Product Specifications

Reamer Diameter (Decimal Inch) 0.8594

Reamer Diameter (Inch) 55/64

Reamer Material High Speed Steel

Shank Type Straight

Flute Type Straight

Overall Length (Inch) 10

Flute Length (Inch) 2-5/8

Variable Diameter Reamer Type None

Number of Flutes 8

Minimum Shank Diameter (Decimal Inch) 0.7480

Maximum Shank Diameter (Decimal Inch) 0.7495

Over/Under Size Reamer No

Dowel Pin Reamer No

Cutting Direction Right Hand

Reamer Finish/Coating Bright

Product Specifications
Reamer Diameter (Decimal Inch)	0.8594
Reamer Diameter (Inch)	55/64
Reamer Material	High Speed Steel
Shank Type	Straight
Flute Type	Straight
Overall Length (Inch)	10
Flute Length (Inch)	2-5/8
Variable Diameter Reamer Type	None
Number of Flutes	8
Minimum Shank Diameter (Decimal Inch)	0.7480
Maximum Shank Diameter (Decimal Inch)	0.7495
Over/Under Size Reamer	No
Dowel Pin Reamer	No
Cutting Direction	Right Hand
Reamer Finish/Coating	Bright

$131.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Drill Rod & Tool Steels - 72" Long x 1-1/2" Wide x 3/16" Thick O-1 Oil-Hardening Flat Stock

Item #: 15049331
Brand: Drill Rod & Tool Steels
Model #: 47

Product Specifications
Thickness (Inch)	0.1875
Width (Inch)	1.5
Length (Inch)	72
Width Tolerance (Decimal Inch)	+ .005 - .000
Thickness Tolerance (Decimal Inch)	+/- .001
Length Tolerance (Decimal Inch)	+1.00 -0.000
System of Measurement	Inch

$203.07

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 7/8" Bundle Diam, 0.167" Hole, Nylon Clamp

Item #: 05163910
Brand: Made in USA
Model #:

Product Specifications
Material	Nylon
Color	White
Mounting Method	Fastener Mount
Maximum Bundle Diameter (Decimal Inch)	7/8
Maximum Bundle Diameter (Inch)	7/8
Mounting Hole Size (Decimal Inch)	0.1670
Mounting Hole Size (Inch)	0.1670
Color	White
Material	Nylon

$141.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 24" x 12" x 5mm Black Neoprene Sheet

Item #: 64974959
Brand: Made in USA
Model #:

Product Specifications
Material	Neoprene
Thickness (mm)	5.000
Durometer (Shore A)	65 - 75
Width (Inch)	12
Length (Inch)	24
Color	Black
Grade	Premium/High Grade
Tensile Strength	1500
Minimum Temperature (F)	-20.000
Maximum Temperature (F)	170.000

$144.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

GWS - Square End Mills Mill Diameter (Inch): 0.75 Mill Diameter (Decimal Inch): 0.7500

Item #: 15074776
Brand: GWS
Model #: 125650

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.

Product Specifications

Square End Mills; Mill Diameter (Inch): 0.75 ; Mill Diameter (Decimal Inch): 0.7500 ; Number of Flutes: 3 ; Length of Cut (Inch): 2.5 ; Length of Cut (Decimal Inch): 2.5000 ; Material: Solid Carbide

Mill Diameter (Inch) 0.75

Mill Diameter (Decimal Inch) 0.7500

Number of Flutes 3

Length of Cut (Inch) 2.5

Length of Cut (Decimal Inch) 2.5000

Material Solid Carbide

Finish/Coating None

Shank Diameter (Inch) 0.75

Shank Diameter (Decimal Inch) 0.7500

Single or Double End Single

Overall Length (Inch) 5

Overall Length (Decimal Inch) 5.00000

Center Cutting Center Cutting

Flute Direction Right Hand

Cutting Direction Right Hand

Helix Angle 37

Variable Helix No

Flute Type Upcut

Length Type Standard

Maximum Helix Angle 37

Extended Reach No

Series/List 1020

$210.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3M - 54.8m x 72mm x 12.1 mil Black Polyethylene Cloth Duct Tape

Item #: 09613704
Brand: 3M
Model #: 7100139310

Features and Benefits

Polyethylene cloth is strong, durable and used on irregular and rough surfaces in sealing and repair applications. It is not recommended for ductwork.

Product Specifications

Tape Type Duct Tape

Width (mm) 72.00

Length Range 36 yd. - 71.9 yd.

Material Type Polyethylene Cloth

Color/Pattern Black

Thickness (mil) 12.10

Adhesive Material Rubber

Length 54.8m

Series Part Number 8979

Tensile Strength (Lb./Inch) 36.00

Minimum Operating Temperature (F) 0.00

Maximum Operating Temperature (F) 200.00

Product Specifications
Tape Type	Duct Tape
Width (mm)	72.00
Length Range	36 yd. - 71.9 yd.
Material Type	Polyethylene Cloth
Color/Pattern	Black
Thickness (mil)	12.10
Adhesive Material	Rubber
Length	54.8m
Series Part Number	8979
Tensile Strength (Lb./Inch)	36.00
Minimum Operating Temperature (F)	0.00
Maximum Operating Temperature (F)	200.00

$90.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

PRO-SOURCE - Pleated & Panel Air Filters Filter Type: Washable Nominal Height (Inch): 12

Item #: 14273890
Brand: PRO-SOURCE
Model #:

Product Specifications

Pleated & Panel Air Filters; Filter Type: Washable ; Nominal Height (Inch): 12 ; Nominal Width (Inch): 24 ; Nominal Depth (Inch): 2 ; MERV Rating: 5 ; Media Material: Polypropylene

Filter Type Washable

Nominal Height (Inch) 12

Nominal Width (Inch) 24

Nominal Depth (Inch) 2

MERV Rating 5

Media Material Polypropylene

Integrated Frame Yes

Actual Height (Decimal Inch) 11.500

Actual Width (Decimal Inch) 23.500

Actual Depth (Inch) 1.875

Maximum Air Flow (FPM) 300

CFM 1000

Initial Resistance at FPM (Inches w.g.) 0.27 (at 300 FPM)

Final Resistance at FPM (Inches w.g.) .5

Maximum Temperature (F) 250.000

Frame Material Steel

$123.16

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Telemecanique Sensors - NPN, 1mm Detection, Cylinder, Inductive Proximity Sensor - 3 Wires, IP67, 5 to 24 VDC, 29mm Long

Item #: 56840424
Brand: Telemecanique Sensors
Model #: XS1L04NA310
Exact Tooling IR#: 04

Product Specifications
Sensor Type	Inductive
Body Shape	Cylinder
Sensor Operation Output Mode	NO
Output Type	NPN
Connector Type	Cable
Number of Wires	3
Detection Distance (mm)	1.00
Maximum Voltage	5-24 VDC
Ingress Protection Rating	IP67
Maximum Load Capacity (mA)	100
Response Frequency (Hz)	5000
Housing Material	Brass
Resistance Features	Shock Resistant; Vibration Resistant
Overall Length (mm)	29
Standards Met	CSA; IEC 60068-2-27; IEC 60068-2-6; IEC 60529; RoHS Compliant; UL

$212.37

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Telemecanique Sensors - NC/NO, 240 VAC, Roller Lever Actuator, General Purpose Limit Switch - 1, 2, 6, 12, 13, 4X, 6P NEMA Rating, IP66, IP67, IP68 IPR Rating

Item #: 49756810
Brand: Telemecanique Sensors
Model #: XCMD2145L5
Exact Tooling IR#: 04

Product Specifications
Actuator Type	Roller Lever
Voltage	240 VAC
Contact Configuration	NC/NO
Material	Plastic
Amperage	5
Actuator Length (Decimal Inch)	4-1/2
NEMA Rating	1; 2; 6; 12; 13; 4X; 6P
Ingress Protection Rating	IP66; IP67; IP68
Maximum Operating Temperature (F)	158
Minimum Operating Temperature (F)	-13
Overall Width (Decimal Inch)	1.9000
Standards Met	CE; CENELEC EN 50047; CSA; UL Listed

$152.30

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rust-Oleum - 1 Gal High Gloss Navy Gray Water-Based Epoxy - 200 to 350 Sq Ft/Gal Coverage, <250 g/L VOC Content

Item #: 00243063
Brand: Rust-Oleum
Model #: 6086408
Exact Tooling IR#: 04

Product Specifications
Type	Water-Based Epoxy
Color Family	Gray
Color	Navy Gray
Container Size	1 gal
Finish	High Gloss
VOC Content (g/L)	<250
Coverage (Sq. Ft.)	200-350
Coverage (Sq. Ft./Gal.)	200-350
PSC Code	8010

$148.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Surge Industrial - 5 Gal Container Cleaner - Use on Hard Surfaces

Item #: 42545269
Brand: Surge Industrial
Model #: SJF 0005
Exact Tooling IR#: 04

Product Specifications
Type	Cleaner
Container Size (Gal.)	5.00
Material Application	Hard Surfaces
Container Type	Container

$242.21

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Allied Machine and Engineering - 31.8mm Diam, Seat Code 29, 140° Included Angle Spade Drill Insert - TiN Coated, Carbide, Series GEN3SYS XT Pro

Item #: 39432604
Brand: Allied Machine and Engineering
Model #: XTN29-31.80
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, non ferrous materials, plastics, and other tough-to-machine materials.

Titanium nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness-resistance allows the tool to run at higher speeds than uncoated tools.

Product Specifications
Series Name	GEN3SYS XT Pro
Diameter (Decimal Inch)	1.2520
Diameter (mm)	31.80
Series Code/Seat Size	29
Material	Carbide
Coating	TiN
Included Angle Degree	140

Product Specifications

Series Name GEN3SYS XT Pro

Diameter (Decimal Inch) 1.2520

Diameter (mm) 31.80

Series Code/Seat Size 29

Material Carbide

Coating TiN

Included Angle Degree 140

$175.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Tool-Flo - FGNR, Right Hand, Indexable Grooving Tool Holder - APIP 203-4 Insert Compatibility, 1-1/2" Shank Height, 1-1/2" Shank Width, 7" OAL

Item #: 79680757
Brand: Tool-Flo
Model #: 92802414
Exact Tooling IR#: 04

Product Specifications
Toolholder Type	NonFace Grooving
Hand of Holder	Right Hand
Overall Length (Inch)	7
Overall Length (Decimal Inch)	7.0000
Toolholder Style	FGNR
Insert Compatibility	APIP 203-4
Shank Height (Decimal Inch)	1.5000
Shank Height (Inch)	1-1/2
Shank Width/Diameter (Inch)	1-1/2
Shank Width/Diameter (Decimal Inch)	1.5000
Series	Vee Bottom
Through Coolant	Non Coolant Through
Multi-Use Tool	No
Insert Holding Method	Clamp
Manufacturers Catalog Number	FGNR-24-2034
Complete Insert Compatibility	APIP 203-4

$184.71

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Seco - MSBN, Right Hand Cut, 75° Lead Angle, 32mm Shank Height x 32mm Shank Width, Negative Rake Indexable Turning Toolholder - 170mm OAL, SNM..1906.. Insert Compatibility, Series Multi-Option

Item #: 60125580
Brand: Seco
Model #: 20790
Exact Tooling IR#: 04

Product Specifications
Hand of Holder	Right Hand
Toolholder Style	MSBN
Rake	Negative
Rake Angle	-6
Series	Multi-Option
Lead Angle	75
Shank Width (mm)	32.00
Shank Width (Decimal Inch)	1.2598
Shank Height (mm)	32.00
Shank Height (Decimal Inch)	1.2598
Overall Length (mm)	170.00
Overall Length (Decimal Inch)	6.6929
Insert Compatibility	SNM..1906..
Multi-Use Tool	No
Insert Holding Method	Pin & Clamp
Back of Bar to Cutting Edge (mm)	27.00
Back of Bar to Cutting Edge (Decimal Inch)	1.0630
Head Length (mm)	45.00
Head Length (Decimal Inch)	1.7717
Insert Inscribed Circle (Decimal Inch)	0.7500
Toolholder Material	Steel

$198.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Walter-Prototyp - ConeFit 15.88mm 89° Shank Milling Tip Insert Holder & Shank - 0.827" Projection, E12 Neck Thread, 12.7mm Nose Diam, 165.1mm OAL, Steel AK610 Tool Holder

Item #: 36375376
Brand: Walter-Prototyp
Model #: 5634454
Exact Tooling IR#: 04

Product Specifications
Series	ConeFit
Shank Type	89 Degree Shank
Shank Diameter (mm)	15.88
Shank Diameter (Decimal Inch)	0.6250
Projection (Decimal Inch)	0.8270
Neck Thread Size	E12
Nose Diameter (mm)	12.70
Nose Diameter (Decimal Inch)	0.5000
Toolholder Material	Steel
Overall Length (mm)	165.10
Overall Length (Decimal Inch)	6.5000
Through Coolant	Through Coolant
Weldon Flat	No
Shank Shape	Straight
Toolholder Style	AK610

$205.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Seco - PSBNL, Left Hand Cut, 32mm Shank Height x 32mm Shank Width, Negative Rake Indexable Turning Toolholder - 171mm OAL, SNMG Insert Compatibility, Series P-Lever

Item #: 36175487
Brand: Seco
Model #: 91961
Exact Tooling IR#: 04

Product Specifications
Hand of Holder	Left Hand
Toolholder Style	PSBNL
Rake	Negative
Series	P-Lever
Shank Width (mm)	32.00
Shank Height (mm)	32.00
Overall Length (mm)	171.00
Insert Compatibility	SNMG
Multi-Use Tool	Yes

$198.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Seco - MWLN, Left Hand Cut, 95° Lead Angle, 32mm Shank Height x 32mm Shank Width, Negative Rake Indexable Turning Toolholder - 170mm OAL, WN..0804.. Insert Compatibility, Series Multi-Option

Item #: 60182466
Brand: Seco
Model #: 02237
Exact Tooling IR#: 04

Product Specifications
Hand of Holder	Left Hand
Toolholder Style	MWLN
Rake	Negative
Rake Angle	-6
Series	Multi-Option
Lead Angle	95
Shank Width (mm)	32.00
Shank Width (Decimal Inch)	1.2598
Shank Height (mm)	32.00
Shank Height (Decimal Inch)	1.2598
Overall Length (mm)	170.00
Overall Length (Decimal Inch)	6.6929
Insert Compatibility	WN..0804..
Multi-Use Tool	No
Insert Holding Method	Pin & Clamp
Back of Bar to Cutting Edge (mm)	40.00
Back of Bar to Cutting Edge (Decimal Inch)	1.5748
Head Length (mm)	31.00
Head Length (Decimal Inch)	1.2205
Insert Inscribed Circle (Decimal Inch)	0.5000
Toolholder Material	Steel

$198.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Seco - PCBNL, Left Hand Cut, 32mm Shank Height x 32mm Shank Width, Negative Rake Indexable Turning Toolholder - 171mm OAL, CNMG Insert Compatibility, Series P-Lever

Item #: 36175297
Brand: Seco
Model #: 91936
Exact Tooling IR#: 04

Product Specifications
Hand of Holder	Left Hand
Toolholder Style	PCBNL
Rake	Negative
Series	P-Lever
Shank Width (mm)	32.00
Shank Height (mm)	32.00
Overall Length (mm)	171.00
Insert Compatibility	CNMG
Multi-Use Tool	Yes

$198.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Seco - DDHN, Right Hand Cut, 107.5° Lead Angle, 32mm Shank Height x 32mm Shank Width, Negative Rake Indexable Turning Toolholder - 170mm OAL, DN..1506.. Insert Compatibility, Series Dual Clamp

Item #: 60126299
Brand: Seco
Model #: 34188
Exact Tooling IR#: 04

Product Specifications
Hand of Holder	Right Hand
Toolholder Style	DDHN
Rake	Negative
Rake Angle	-6
Series	Dual Clamp
Lead Angle	107.5
Shank Width (mm)	32.00
Shank Width (Decimal Inch)	1.2598
Shank Height (mm)	32.00
Shank Height (Decimal Inch)	1.2598
Overall Length (mm)	170.00
Overall Length (Decimal Inch)	6.6929
Insert Compatibility	DN..1506..
Multi-Use Tool	No
Insert Holding Method	Clamp
Back of Bar to Cutting Edge (mm)	40.00
Back of Bar to Cutting Edge (Decimal Inch)	1.5748
Head Length (mm)	33.00
Head Length (Decimal Inch)	1.2992
Insert Inscribed Circle (Decimal Inch)	0.5000
Toolholder Material	Steel

$198.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Mill Diameter (Inch)	0.75
Mill Diameter (Decimal Inch)	0.7500
Number of Flutes	3
Length of Cut (Inch)	2.5
Length of Cut (Decimal Inch)	2.5000
Material	Solid Carbide
Finish/Coating	None
Shank Diameter (Inch)	0.75
Shank Diameter (Decimal Inch)	0.7500
Single or Double End	Single
Overall Length (Inch)	5
Overall Length (Decimal Inch)	5.00000
Center Cutting	Center Cutting
Flute Direction	Right Hand
Cutting Direction	Right Hand
Helix Angle	37
Variable Helix	No
Flute Type	Upcut
Length Type	Standard
Maximum Helix Angle	37
Extended Reach	No
Series/List	1020

Filter Type	Washable
Nominal Height (Inch)	12
Nominal Width (Inch)	24
Nominal Depth (Inch)	2
MERV Rating	5
Media Material	Polypropylene
Integrated Frame	Yes
Actual Height (Decimal Inch)	11.500
Actual Width (Decimal Inch)	23.500
Actual Depth (Inch)	1.875
Maximum Air Flow (FPM)	300
CFM	1000
Initial Resistance at FPM (Inches w.g.)	0.27 (at 300 FPM)
Final Resistance at FPM (Inches w.g.)	.5
Maximum Temperature (F)	250.000
Frame Material	Steel