DC Motor - Size 56 Frame, Resilient Base Mount, 1 Speed, Ball Bearings, 7.4 Full Load Amps, B Class Insulation, CCW Lead End Rev

Item #: 86224698
Brand: US Motors
Model #: 6330
Exact Tooling IR#: 04

Product Specifications
Type of Enclosure	TEAO
Horsepower	1/2
Thermal Protection Rating	Auto
Name Plate RPMs	1725
Voltage	115
Frequency Hz	60
Frame Size	56
Mount Type	Resilient Base
Number of Speeds	1
Bearing Type	Ball
Full Load Amperage	7.4
Insulation Class	B
Full Load Efficiency Rating	70.10
Motor Run Capacitor Micro Farid	0.00
Motor Run Capacitor Volts	0
Service Factor Rating	1.00
Motor Rotation	CCW Lead End Rev
PSC Code	6105

$285.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Associated Spring Raymond - 28mm Rod Diam, 50.2mm Diam, 16mm Max Stroke, Nitrogen Gas Spring Cylinder - 54mm Body Length, 70mm OAL, 3,103 Lb Full Stroke Spring Force, 360 psi Initial Charge

Item #: 69130011
Brand: Associated Spring Raymond
Model #: X1000-016
Exact Tooling IR#: 04

Product Specifications
Initial Charge Pressure (psi)	360
Initial Charge Pressure (bar)	25
Diameter (mm)	50.20
Body Length (mm)	54
Body Length (Decimal Inch)	2.1260
Diameter (Decimal Inch)	1.9764
Spring Force Initial (N)	9199
Spring Force Initial (lbf)	2068
Spring Force Full Stroke (N)	13803
Spring Force Full Stroke (lbf)	3103
Rod Diameter (mm)	28
Rod Diameter (Decimal Inch)	1.1024
Overall Length (mm)	70
Overall Length (Decimal Inch)	2.7559
Maximum Stroke (mm)	16
Maximum Stroke (Decimal Inch)	0.6299

$287.30

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Norgren - 4.6 CV Rate, 1/2" NPT Inlet 1/2 Basic Valves - 1/2" NPT Inlet, Poppet Valve, Solenoid Actuator

Item #: 87823373
Brand: Norgren
Model #: D1024C-CY1W2
Exact Tooling IR#: 04

Product Specifications
Valve Type	Poppet
CV Rating	4.6
Inlet Size (Inch)	1/2
Number of Ports	3
Configuration	NC
Actuator Type	Solenoid
Color	Black

$588.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Domnick Hunter - Differential Pressure Gauge Kit For Flanged Filters

Item #: 57266207
Brand: Domnick Hunter
Model #: DPG
Exact Tooling IR#: 04

Product Specifications

Differential Pressure Gauge Kit For Flanged Filters -

Type Differential Pressure Gauge Kit for Flanged Filters

For Use With Flanged Filters

$470.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Parker - FRL Lubricator Oil - Use with Lubricators

Item #: 03306982
Brand: Parker
Model #: F442005
Exact Tooling IR#: 04

Product Specifications
Type	Lubricator Oil
For Use With	Lubricators
Description	1 Gallon

$398.51

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Motors - 1 hp, ODP Enclosure, Auto Thermal Protection, 3,450 RPM, 115/230 Volt, 60 Hz, Industrial Electric AC/DC Motor - Size 56 Frame, Square Flange Mount, 1 Speed, Ball Bearings, 13.6/6.8 Full Load Amps, B Class Insulation, CCW Drive End

Item #: 87959615
Brand: US Motors
Model #: JS1002-2V
Exact Tooling IR#: 04

Product Specifications
Type of Enclosure	ODP
Horsepower	1
Thermal Protection Rating	Auto
Name Plate RPMs	3450
Voltage	115/230
Frequency Hz	60
Frame Size	56
Mount Type	Square Flange
Number of Speeds	1
Bearing Type	Ball
Full Load Amperage	13.6/6.8
Insulation Class	B
Full Load Efficiency Rating	77.20
Motor Run Capacitor Micro Farid	0.00
Motor Run Capacitor Volts	0
Service Factor Rating	1.65
Motor Rotation	CCW Drive End
PSC Code	6105

$451.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

THK - 1,000mm OAL x 28mm Overall Width x 26mm Overall Height 4 Way HSR Rail - 80mm Between Holes, 9 x 14 x 12mm Hole Size

Item #: 85296630
Brand: THK
Model #: HSR301000LGKRAI
Exact Tooling IR#: 04

Product Specifications
Type	4-Way Type HSR Rail
Overall Length (mm)	1000.0000
Overall Width (mm)	28.0000
Overall Height (mm)	26.00000
Hole Spacing (mm)	80.00
Hole Size	9.0x14.0x12.0

$595.46

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Motors - 3/4 hp, TEFC Enclosure, No Thermal Protection, 3,450 RPM, 115/230 Volt, 60 Hz, Single Phase Permanent Split Capacitor (PSC) Motor - Size 56C Frame, C-Face Mount, 1 Speed, Ball Bearings, 10.2/5.1 Full Load Amps, B Class Insulation, Reversible

Item #: 76507342
Brand: US Motors
Model #: T34CA1JCR
Exact Tooling IR#: 04

Product Specifications
Motor Type	Single Phase Permanent Split Capacitor (PSC)
Type of Enclosure	TEFC
Horsepower	3/4
Thermal Protection Rating	None
Name Plate RPMs	3450
Voltage	115/230
Frequency Hz	60
Frame Size	56C
Mount Type	C-Face
Number of Speeds	1
Bearing Type	Ball
Applications	General Purpose
Full Load Amperage	10.2/5.1
Insulation Class	B
Overall Length (Decimal Inch)	11.3000
Shaft Diameter x Length (Inch)	5/8 x 2-1/16
Full Load Efficiency Rating	75.6
Service Factor Rating	1
Motor Rotation	Reversible
PSC Code	6105

$501.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - Section 5V, V-Belt - Neoprene Rubber, Narrow Banded, No. 5V2500

Item #: 35393693
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Belt Style	V-Belts
Belt Section	5V
Belt Number	5V2500
Number of Ribs	5.000
Material	Neoprene Rubber
Style	Narrow Banded

$1,341.10

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Motors - 1 hp, ODP Enclosure, Auto Thermal Protection, 3,450 RPM, 115/208-230 Volt, 60 Hz, Industrial Electric AC/DC Motor - Size 56C Frame, C-Face Mount, 1 Speed, Ball Bearings, 12.8/6.7-6.4 Full Load Amps, B Class Insulation, Reversible

Item #: 87958773
Brand: US Motors
Model #: EC1002
Exact Tooling IR#: 04

Product Specifications
Type of Enclosure	ODP
Horsepower	1
Thermal Protection Rating	Auto
Name Plate RPMs	3450
Voltage	115/208-230
Frequency Hz	60
Frame Size	56C
Mount Type	C-Face
Number of Speeds	1
Bearing Type	Ball
Full Load Amperage	12.8/6.7-6.4
Insulation Class	B
Full Load Efficiency Rating	78.50
Motor Run Capacitor Micro Farid	0.00
Motor Run Capacitor Volts	0
Service Factor Rating	1.40
Motor Rotation	Reversible
PSC Code	6105

$344.31

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Lovejoy - 1" Bore Depth, 2,880 In/Lbs. Torque, DD-Type Double Universal Joint - 9/16" Inside x 1-1/8" Outside Diam, 7" OAL

Item #: 35408467
Brand: Lovejoy
Model #: 68514417038
Exact Tooling IR#: 04

Product Specifications
Bore Depth (Inch)	1
Outside Diameter (Inch)	1-1/8
Torque (In/Lb)	2880.00
Type	DD-Type Double Joints
Overall Length (Inch)	7
Inside Diameter (Inch)	9/16

$452.78

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

De-Sta-Co - Air Actuator Pinion - For Use with RR-46

Item #: 68421569
Brand: De-Sta-Co
Model #: RR-4603F
Exact Tooling IR#: 04

Product Specifications
Actuator Accessory Type	Pinion
For Use With	RR-46

$482.16

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SKF - 3" Bore Diam, 112,500 Lb Dynamic Capacity, Spherical Plain Bearing - 4-3/4" OD, 2-5/8" Thick, 337,500 Lb Static Load Capacity

Item #: 86276771
Brand: SKF
Model #: GEZ 300 ES
Exact Tooling IR#: 04

Product Specifications
Type	Spherical Plain
Bore Diameter (Decimal Inch)	3.0000
Dynamic Load Capacity (Pounds)	112500
Static Load Capacity (Pounds)	337500.00
Outside Diameter (Decimal Inch)	4.7500
Thickness (Decimal Inch)	2.6250

$573.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Nachi - 25mm Bore Diam, 47mm OD, Open Angular Contact Radial Ball Bearing - 12mm Wide, 1 Row, Round Bore, 17,300 Nm Static Capacity, 21,000 Nm Dynamic Capacity

Item #: 35435031
Brand: Nachi
Model #: 7005 CYDU P4
Exact Tooling IR#: 04

Features and Benefits

Open Bearing design without seals or shields and are intended to be lubricated in place and periodically maintained

Round bore bearings are designed for mounting on round shafts.

Product Specifications
Type	Angular Contact
Style	Open
Bore Diameter (mm)	25.00
Outside Diameter (mm)	47.00
Width (mm)	12.00
Flange Type	Without Flange
Number of Rows	1
Bore Type	Round
Contact Angle	13
Snap Ring Included	Without Snap Ring
Static Load Capacity (Nm)	17300
Dynamic Load Capacity (Nm)	21000
Bearing Number	7005-DU

Product Specifications

Type Angular Contact

Style Open

Bore Diameter (mm) 25.00

Outside Diameter (mm) 47.00

Width (mm) 12.00

Flange Type Without Flange

Number of Rows 1

Bore Type Round

Contact Angle 13

Snap Ring Included Without Snap Ring

Static Load Capacity (Nm) 17300

Dynamic Load Capacity (Nm) 21000

Bearing Number 7005-DU

$609.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 3/4", 2" LOC, 3/4" Shank Diam, 4-1/2" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, DLC Finish, 35° Helix, Centercutting, Right Hand Cut, Right Hand Flute

Item #: 41659632
Brand: OSG
Model #: 28432000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Diamond-like carbon (DLC) is an extremely hard and durable coating that is similar to diamond. It is commonly used on stainless steel, ceramics, plastics and aluminum alloys.

Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.

Product Specifications
Mill Diameter (Inch)	3/4
Mill Diameter (Decimal Inch)	0.7500
Number of Flutes	3
Length of Cut (Inch)	2
Material	Solid Carbide
Finish/Coating	DLC
Shank Diameter (Inch)	3/4
Single or Double End	Single
Overall Length (Inch)	4-1/2
Center Cutting	Center Cutting
Flute Direction	Right Hand
Cutting Direction	Right Hand
Helix Angle	35
Extended Reach	No

Product Specifications

Mill Diameter (Inch) 3/4

Mill Diameter (Decimal Inch) 0.7500

Number of Flutes 3

Length of Cut (Inch) 2

Material Solid Carbide

Finish/Coating DLC

Shank Diameter (Inch) 3/4

Single or Double End Single

Overall Length (Inch) 4-1/2

Center Cutting Center Cutting

Flute Direction Right Hand

Cutting Direction Right Hand

Helix Angle 35

Extended Reach No

$440.56

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Controx - 4" Blade Diam x 1/16" Blade Thickness, 1" Hole, 36 Teeth, Cobalt Side Chip Saw - Staggered Tooth, Arbor Connection, Right Hand Cut, Uncoated, with Keyway

Item #: 64000391
Brand: Controx
Model #: 244488
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.

Uncoated tools do not feature supportive treatments on the cutting edge. They are used at reduced speeds for general applications on nonferrous metals.

Product Specifications
Blade Diameter (Inch)	4
Blade Diameter (Decimal Inch)	4.00
Blade Thickness (Inch)	1/16
Blade Thickness (Decimal Inch)	0.0625
Arbor Hole Diameter (Inch)	1
Tooth Configuration	Staggered
Material	Cobalt
Finish/Coating	Uncoated
Number of Teeth	36
Keyway	Yes
Material Grade	M35
Rake Angle	15.000
Connection Type	Arbor
Cutting Direction	Right Hand

Product Specifications

Blade Diameter (Inch) 4

Blade Diameter (Decimal Inch) 4.00

Blade Thickness (Inch) 1/16

Blade Thickness (Decimal Inch) 0.0625

Arbor Hole Diameter (Inch) 1

Tooth Configuration Staggered

Material Cobalt

Finish/Coating Uncoated

Number of Teeth 36

Keyway Yes

Material Grade M35

Rake Angle 15.000

Connection Type Arbor

Cutting Direction Right Hand

$273.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 4" Diam x 0.0938" Blade Thickness x 1" Arbor Hole Diam, 80 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, 5° Rake, Concave Ground

Item #: 03515467
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Product Specifications
Material	Solid Carbide
Blade Diameter (Decimal Inch)	4.00
Blade Diameter (Inch)	4
Blade Thickness (Decimal Inch)	0.0938
Arbor Hole Diameter (Inch)	1
Connection Type	Arbor
Number of Teeth	80
Cutting Direction	Right Hand
Features	Concave Ground
Finish/Coating	Uncoated
Material Grade	C2
Blade Diameter Tolerance (Decimal Inch)	+0.005/-0.005
Blade Thickness Tolerance (Decimal Inch)	+0.005/-0.005
Arbor Hole Diameter Tolerance (Decimal Inch)	+0.001/-0.000
Rake Angle	5
Material Application	Metal
Tooth Configuration	Straight

Product Specifications

Material Solid Carbide

Blade Diameter (Decimal Inch) 4.00

Blade Diameter (Inch) 4

Blade Thickness (Decimal Inch) 0.0938

Arbor Hole Diameter (Inch) 1

Connection Type Arbor

Number of Teeth 80

Cutting Direction Right Hand

Features Concave Ground

Finish/Coating Uncoated

Material Grade C2

Blade Diameter Tolerance (Decimal Inch) +0.005/-0.005

Blade Thickness Tolerance (Decimal Inch) +0.005/-0.005

Arbor Hole Diameter Tolerance (Decimal Inch) +0.001/-0.000

Rake Angle 5

Material Application Metal

Tooth Configuration Straight

$523.05

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Emuge - 5/8" Diam, Coarse Pitch, 3/4" LOC, 3 Flute Solid Carbide 45° Corner Chamfer Roughing End Mill - Bright Finish, 3-3/4" OAL, 5/8" Shank Diam, Single End, Extended Reach, 40° Helix

Item #: 30595482
Brand: Emuge
Model #: 2888 Z.0625
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Bright provides a smooth, polished finish on the tool. It increases chip flow in softer materials such as aluminum, wood and plastic.

Product Specifications
Mill Diameter (Inch)	5/8
Number of Flutes	3
Pitch	Coarse
Length of Cut (Inch)	3/4
Shank Diameter (Inch)	5/8
End Type	Corner Chamfer
Material	Solid Carbide
Finish/Coating	Bright
Overall Length (Inch)	3-3/4
Centercutting	NonCenter Cutting
Helix Angle	40.00
Extended Reach	Yes
Coolant Induced	Yes
Chamfer Angle	45
Single or Double End	Single
Cutting Direction	Right Hand
Flute Direction	Right Hand
Length Type	Long
Flute Type	Spiral
Reach Length (Inch)	1-7/8
Series/List	2888 Z
Additional Information	Combination Axial & Radial Coolant Hole Channels

Product Specifications

Mill Diameter (Inch) 5/8

Number of Flutes 3

Pitch Coarse

Length of Cut (Inch) 3/4

Shank Diameter (Inch) 5/8

End Type Corner Chamfer

Material Solid Carbide

Finish/Coating Bright

Overall Length (Inch) 3-3/4

Centercutting NonCenter Cutting

Helix Angle 40.00

Extended Reach Yes

Coolant Induced Yes

Chamfer Angle 45

Single or Double End Single

Cutting Direction Right Hand

Flute Direction Right Hand

Length Type Long

Flute Type Spiral

Reach Length (Inch) 1-7/8

Series/List 2888 Z

Additional Information Combination Axial & Radial Coolant Hole Channels

$443.03

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 25mm, 45mm LOC, 25mm Shank Diam, 121mm OAL, 10 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 45° Helix, Right Hand Cut, Right Hand Flute, Series 3019

Item #: 58538737
Brand: Guhring
Model #: 9030190250000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.

Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.

Product Specifications
Mill Diameter (mm)	25.00
Mill Diameter (Decimal Inch)	0.9843
Number of Flutes	10
Length of Cut (mm)	45.00
Length of Cut (Decimal Inch)	1.7717
Material	Solid Carbide
Finish/Coating	Uncoated
Shank Diameter (mm)	25.00
Single or Double End	Single
Overall Length (mm)	121.00
Center Cutting	NonCenter Cutting
Flute Direction	Right Hand
Cutting Direction	Right Hand
Helix Angle	45.00
Flute Type	Spiral
Length Type	Regular
Material Grade	Ultra Fine Grain
Chipbreaker	No
Extended Reach	No
Series/List	3019

Product Specifications

Mill Diameter (mm) 25.00

Mill Diameter (Decimal Inch) 0.9843

Number of Flutes 10

Length of Cut (mm) 45.00

Length of Cut (Decimal Inch) 1.7717

Material Solid Carbide

Finish/Coating Uncoated

Shank Diameter (mm) 25.00

Single or Double End Single

Overall Length (mm) 121.00

Center Cutting NonCenter Cutting

Flute Direction Right Hand

Cutting Direction Right Hand

Helix Angle 45.00

Flute Type Spiral

Length Type Regular

Material Grade Ultra Fine Grain

Chipbreaker No

Extended Reach No

Series/List 3019

$425.33

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 3/4" Diam, 3" LOC, 4 Flute Solid Carbide Roughing & Finishing Square End Mill - AlTiN Finish, 6" OAL, 3/4" Shank Diam, Straight Shank, 40° Helix, Centercutting, Extra Long Length

Item #: 73902082
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.

Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.

Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.

Product Specifications
Mill Diameter (Inch)	3/4
Mill Diameter (Decimal Inch)	0.7500
End Type	Square
Number of Flutes	4
Material	Solid Carbide
Finish/Coating	AlTiN
Length of Cut (Inch)	3
Length of Cut (Decimal Inch)	3.0000
Shank Diameter (Inch)	3/4
Overall Length (Inch)	6
Centercutting	Center Cutting
Extended Reach	NonExtendedReach
Chipbreaker	Yes
Shank Type	Straight Shank
Helix Angle	40
Material Grade	Micrograin
Single or Double End	Single
Length Type	Extra Long
Cutting Direction	Right Hand
Flute Direction	Right Hand

Product Specifications

Mill Diameter (Inch) 3/4

Mill Diameter (Decimal Inch) 0.7500

End Type Square

Number of Flutes 4

Material Solid Carbide

Finish/Coating AlTiN

Length of Cut (Inch) 3

Length of Cut (Decimal Inch) 3.0000

Shank Diameter (Inch) 3/4

Overall Length (Inch) 6

Centercutting Center Cutting

Extended Reach NonExtendedReach

Chipbreaker Yes

Shank Type Straight Shank

Helix Angle 40

Material Grade Micrograin

Single or Double End Single

Length Type Extra Long

Cutting Direction Right Hand

Flute Direction Right Hand

$409.97

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Type	Differential Pressure Gauge Kit for Flanged Filters
For Use With	Flanged Filters