Taper Line - Air Cylinder Self-Aligning Rod Coupler - For 1-1/2 - 12 Air Cylinders, Use with Hydraulic & Pneumatic Cylinders

Item #: 37902574
Brand: Taper Line
Model #: TLAC 112-12
Exact Tooling IR#: 04

Product Specifications
Type	Self-Aligning Rod Coupler
For Use With	Hydraulic & Pneumatic Cylinders
Thread Size	1-1/2-12

$443.65

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Motors - 3/4 hp, TEFC Enclosure, No Thermal Protection, 1,725 RPM, 575 Volt, 60 Hz, Three Phase Standard Efficient Motor - Size 56 Frame, C-Face Mount, 1 Speed, Ball Bearings, 1.1 Full Load Amps, B Class Insulation, CW Lead End

Item #: 81423162
Brand: US Motors
Model #: EE586-5
Exact Tooling IR#: 04

Product Specifications
Motor Type	Three Phase Standard Efficient
Type of Enclosure	TEFC
Horsepower	3/4
Thermal Protection Rating	None
Name Plate RPMs	1725
Voltage	575
Frequency Hz	60
Frame Size	56
Mount Type	C-Face
Number of Speeds	1
Bearing Type	Ball
Applications	Special Application
Full Load Amperage	1.1
Insulation Class	B
Frame Material	Steel
Overall Length (Decimal Inch)	11.8500
Full Load Efficiency Rating	81.9
Service Factor Rating	1.15
Motor Rotation	CW Lead End
PSC Code	6105

$321.21

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Motors - 1.5 hp, ODP Enclosure, No Thermal Protection, 1,725 RPM, 208-230/460 Volt, 60 Hz, Three Phase Standard Efficient Motor - Size 56 Frame, C-Face/Base Mount, 1 Speed, Ball Bearings, 4.7-4.4/2.2 Full Load Amps, B Class Insulation, Reversible

Item #: 53654125
Brand: US Motors
Model #: EE930B
Exact Tooling IR#: 04

Product Specifications
Motor Type	Three Phase Standard Efficient
Type of Enclosure	ODP
Horsepower	1-1/2
Thermal Protection Rating	None
Name Plate RPMs	1725
Voltage	208-230/460
Frequency Hz	60
Frame Size	56
Mount Type	C-Face/Base
Number of Speeds	1
Bearing Type	Ball
Applications	Special Application
Full Load Amperage	4.7-4.4/2.2
Insulation Class	B
Frame Material	Steel
Overall Length (Decimal Inch)	12.6200
Full Load Efficiency Rating	85.4
Service Factor Rating	1.15
Motor Rotation	Reversible
PSC Code	6105

$321.21

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Motors - 1.5 hp, ODP Enclosure, Auto Thermal Protection, 3,450 RPM, 115/230 Volt, 60 Hz, Industrial Electric AC/DC Motor - Size 56 Frame, Square Flange Mount, 1 Speed, Ball Bearings, 14.4/7.2 Full Load Amps, B Class Insulation, CCW Drive End

Item #: 87959623
Brand: US Motors
Model #: JS1502-1
Exact Tooling IR#: 04

Product Specifications
Type of Enclosure	ODP
Horsepower	1-1/2
Thermal Protection Rating	Auto
Name Plate RPMs	3450
Voltage	115/230
Frequency Hz	60
Frame Size	56
Mount Type	Square Flange
Number of Speeds	1
Bearing Type	Ball
Full Load Amperage	14.4/7.2
Insulation Class	B
Full Load Efficiency Rating	80.10
Motor Run Capacitor Micro Farid	25.00
Motor Run Capacitor Volts	0
Service Factor Rating	1.50
Motor Rotation	CCW Drive End
PSC Code	6105

$275.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Thomson Industries - 119.4mm L x 60mm W x 35mm H, 40mm Transverse Hole Spcg, 40mm Lateral Hole Spcg, Narrow Long Ball Carriage - 16mm Overhang, M8 Hole, 42" High Assembly

Item #: 35523703
Brand: Thomson Industries
Model #: 511H30D0
Exact Tooling IR#: 04

Product Specifications
Type	Narrow Long Ball Carriage
Block Length (mm)	119.40
Block Width (mm)	60.00
Block Height (mm)	35.00
Transverse Hole Spacing (mm)	40.00
Lateral Hole Spacing (mm)	40.00
Hole Size	M8
Assembly Height (mm)	42.00
Block Overhang (mm)	16.00

$354.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Thomson Industries - 119.4mm L x 90mm W x 35.9mm H, 52mm Transverse Hole Spcg, 72mm Lateral Hole Spcg, Standard Long Ball Carriage - 31mm Overhang, M10 Hole, 42" High Assembly

Item #: 35523588
Brand: Thomson Industries
Model #: 511H30B0
Exact Tooling IR#: 04

Product Specifications
Type	Standard Long Ball Carriage
Block Length (mm)	119.40
Block Width (mm)	90.00
Block Height (mm)	35.90
Transverse Hole Spacing (mm)	52.00
Lateral Hole Spacing (mm)	72.00
Hole Size	M10
Assembly Height (mm)	42.00
Block Overhang (mm)	31.00

$354.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Parker - 1" Stroke x 4" Bore Single Acting Air Cylinder - 3/8 Port, 3/4-16 Rod Thread, -10 to 200°F

Item #: 85492726
Brand: Parker
Model #: 4.00NLPR91.00
Exact Tooling IR#: 04

Product Specifications
Type	Single Acting
Bore Size (Inch)	4
Bore Size (Decimal Inch)	4.00
Rod Diameter (Decimal Inch)	1.000
Stroke Length (Inch)	1
Mounting Style	Head or Cap
Port Size	3/8
Port Type	NPT
Length (Decimal Inch)	2.969
Material	Steel/Aluminum
Seal Material	Buna-N
Rod Thread Size	3/4-16
Style	Female

$448.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

US Motors - 1/3 hp, ODP Enclosure, Auto Thermal Protection, 825 RPM, 208-230 Volt, 60 Hz, Industrial Electric AC/DC Motor - Size 48 Frame, Hub Mount, 3 Speed, Sleeve Bearings, 2.1 Full Load Amps, B Class Insulation, CCW Lead End

Item #: 87957270
Brand: US Motors
Model #: 8061
Exact Tooling IR#: 04

Product Specifications
Type of Enclosure	ODP
Horsepower	1/3
Thermal Protection Rating	Auto
Name Plate RPMs	825
Voltage	208-230
Frequency Hz	60
Frame Size	48
Mount Type	Hub
Number of Speeds	3
Bearing Type	Sleeve
Full Load Amperage	2.1
Insulation Class	B
Full Load Efficiency Rating	64.70
Motor Run Capacitor Micro Farid	20.00
Motor Run Capacitor Volts	0
Service Factor Rating	1.00
Motor Rotation	CCW Lead End
PSC Code	6105

$259.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Boston Gear - 10 Pitch, 6" Pitch Diam, 60 Tooth Worm Gear - 3/4" Bore Diam, 14.5° Pressure Angle, Bronze

Item #: 36683357
Brand: Boston Gear
Model #: GB1064
Exact Tooling IR#: 04

Product Specifications
Type	Worm Gear
Number of Teeth	60
Pitch Diameter (Decimal Inch)	6.0000
Bore Diameter (Decimal Inch)	0.7500
Material	Bronze
Pressure Angle	14.5
PSC Code	3020

$549.14

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Gardner Spring - 186 Piece, Stainless Steel Precision Extension Spring Assortment - 93 Sizes

Item #: 01854132
Brand: Gardner Spring
Model #: M37S
Exact Tooling IR#: 04

Product Specifications
Type	Precision Extension
Number of Pieces	186
Number of Sizes	93
Material	Stainless Steel

$324.83

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Thomson Industries - 1" Shaft Diam, 0.69" Base Width, Steel Shaft, Steel Rail, Round Shaft Assemblies - #10 Bolt, 24" Long

Item #: 36694271
Brand: Thomson Industries
Model #: LSRA16L24
Exact Tooling IR#: 04

Product Specifications
Shaft Diameter (Inch)	1
Overall Length (Inch)	24
Base Width (Decimal Inch)	0.6900
Rail Material	Steel
Shaft Material	Steel
Base to Shaft Center Height (Decimal Inch)	1.000
Bolt Size	#10
Length Between Mounting Hole Centers (Inch)	3
Base Center To End Width (Decimal Inch)	0.345

$418.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SKF - 50mm Bore Diam, 110mm Outside Diam, 27mm Wide Cylindrical Roller Bearing - 110,000 N Dynamic Capacity, 112,000 Lbs. Static Capacity

Item #: 43341734
Brand: SKF
Model #: NJ 310 ECM/C3
Exact Tooling IR#: 04

Product Specifications
Type.	Cylindrical
Bore Diameter (mm)	50.000
Static Load Capacity	112000
Dynamic Load Capacity (N)	110000
Outside Diameter (mm)	110.0000
Width (mm)	27.00

$584.65

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SKF - 50mm Bore Diam, 110mm Outside Diam, 27mm Wide Cylindrical Roller Bearing - 110,000 N Dynamic Capacity, 112,000 Lbs. Static Capacity

Item #: 43341726
Brand: SKF
Model #: NJ 310 ECM
Exact Tooling IR#: 04

Product Specifications
Type.	Cylindrical
Bore Diameter (mm)	50.000
Static Load Capacity	112000
Dynamic Load Capacity (N)	110000
Outside Diameter (mm)	110.0000
Width (mm)	27.00

$518.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Emuge - 16mm Diam, 48mm LOC, 2 Flute Solid Carbide Roughing & Finishing End Mill - TiAlN Finish, 108mm OAL, 16mm Shank Diam, Weldon Shank, 38° Helix, Centercutting, Extra Long Length

Item #: 47929310
Brand: Emuge
Model #: 2515A.016
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.

Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.

Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.

Product Specifications
Mill Diameter (mm)	16.00
End Type	Square
Chamfer Length (mm)	0.20
Number of Flutes	2
Material	Solid Carbide
Finish/Coating	TiAlN
Length of Cut (mm)	48.0000
Shank Diameter (mm)	16
Overall Length (mm)	108
Centercutting	Center Cutting
Extended Reach	ExtendedReach
Shank Type	Weldon
Helix Angle	38
Single or Double End	Single
Length Type	Extra Long
Cutting Direction	Right Hand
Flute Direction	Right Hand
Mill Diameter Tolerance (mm)	-0.07
Series/List	2515A

Product Specifications

Mill Diameter (mm) 16.00

End Type Square

Chamfer Length (mm) 0.20

Number of Flutes 2

Material Solid Carbide

Finish/Coating TiAlN

Length of Cut (mm) 48.0000

Shank Diameter (mm) 16

Overall Length (mm) 108

Centercutting Center Cutting

Extended Reach ExtendedReach

Shank Type Weldon

Helix Angle 38

Single or Double End Single

Length Type Extra Long

Cutting Direction Right Hand

Flute Direction Right Hand

Mill Diameter Tolerance (mm) -0.07

Series/List 2515A

$385.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 4" Blade Diam x 1/4" Blade Thickness, 1-1/4" Hole, 32 Teeth, Cobalt Side Chip Saw - Staggered Tooth, Arbor Connection, Right Hand Cut, TiN, with Keyway

Item #: 73084170
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.

Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.

Product Specifications
Blade Diameter (Inch)	4
Blade Diameter (Decimal Inch)	4.00
Blade Thickness (Inch)	1/4
Blade Thickness (Decimal Inch)	0.2500
Arbor Hole Diameter (Inch)	1-1/4
Tooth Configuration	Staggered
Material	Cobalt
Finish/Coating	TiN
Number of Teeth	32
Keyway	Yes
Material Grade	M42
Connection Type	Arbor
Cutting Direction	Right Hand

Product Specifications

Blade Diameter (Inch) 4

Blade Diameter (Decimal Inch) 4.00

Blade Thickness (Inch) 1/4

Blade Thickness (Decimal Inch) 0.2500

Arbor Hole Diameter (Inch) 1-1/4

Tooth Configuration Staggered

Material Cobalt

Finish/Coating TiN

Number of Teeth 32

Keyway Yes

Material Grade M42

Connection Type Arbor

Cutting Direction Right Hand

$434.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 20mm, 26mm LOC, 20mm Shank Diam, 126mm OAL, 4 Flute, Solid Carbide Square End Mill - Single End, Nano-A Finish, Spiral Flute, 36/38° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 3885

Item #: 58562711
Brand: Guhring
Model #: 9038850200000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Nano-A is a multi-layer coating that combines TiAlN and AlTiN coatings in a micro-layer structure that is harder and more wear resistant. It is used at high speeds on alloy steels, stainless steels and aerospace materials. nano-A is a proprietary coating exclusive to Guhring, Inc.

Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.

Product Specifications
Mill Diameter (mm)	20.00
Mill Diameter (Decimal Inch)	0.7874
Number of Flutes	4
Length of Cut (mm)	26.00
Length of Cut (Decimal Inch)	1.0236
Material	Solid Carbide
Finish/Coating	Nano-A
Shank Diameter (mm)	20.00
Single or Double End	Single
Overall Length (mm)	126.00
Center Cutting	Center Cutting
Flute Direction	Right Hand
Cutting Direction	Right Hand
Helix Angle	36.00/38.00
Flute Type	Spiral
Length Type	Long
Material Grade	Ultra Fine Grain
Reach Length (mm)	76.00
Chipbreaker	No
Extended Reach	Yes
Series/List	3885

Product Specifications

Mill Diameter (mm) 20.00

Mill Diameter (Decimal Inch) 0.7874

Number of Flutes 4

Length of Cut (mm) 26.00

Length of Cut (Decimal Inch) 1.0236

Material Solid Carbide

Finish/Coating Nano-A

Shank Diameter (mm) 20.00

Single or Double End Single

Overall Length (mm) 126.00

Center Cutting Center Cutting

Flute Direction Right Hand

Cutting Direction Right Hand

Helix Angle 36.00/38.00

Flute Type Spiral

Length Type Long

Material Grade Ultra Fine Grain

Reach Length (mm) 76.00

Chipbreaker No

Extended Reach Yes

Series/List 3885

$393.98

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 3/4", 5" LOC, 3/4" Shank Diam, 8" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 37° Helix, Centercutting, Right Hand Cut, Right Hand Flute

Item #: 43027663
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.

Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.

Product Specifications
Mill Diameter (Inch)	3/4
Mill Diameter (Decimal Inch)	0.7500
Number of Flutes	3
Length of Cut (Inch)	5
Length of Cut (Decimal Inch)	5.0000
Material	Solid Carbide
Finish/Coating	Uncoated
Shank Diameter (Inch)	3/4
Single or Double End	Single
Overall Length (Inch)	8
Center Cutting	Center Cutting
Flute Direction	Right Hand
Cutting Direction	Right Hand
Helix Angle	37.00
Flute Type	Spiral
Mill Diameter Tolerance (Decimal Inch)	+0.000/-0.005
Material Grade	Micrograin
Chipbreaker	No
Extended Reach	No
Shank Diameter Tolerance (Decimal Inch)	+0.0001/-0.0004

Product Specifications

Mill Diameter (Inch) 3/4

Mill Diameter (Decimal Inch) 0.7500

Number of Flutes 3

Length of Cut (Inch) 5

Length of Cut (Decimal Inch) 5.0000

Material Solid Carbide

Finish/Coating Uncoated

Shank Diameter (Inch) 3/4

Single or Double End Single

Overall Length (Inch) 8

Center Cutting Center Cutting

Flute Direction Right Hand

Cutting Direction Right Hand

Helix Angle 37.00

Flute Type Spiral

Mill Diameter Tolerance (Decimal Inch) +0.000/-0.005

Material Grade Micrograin

Chipbreaker No

Extended Reach No

Shank Diameter Tolerance (Decimal Inch) +0.0001/-0.0004

$305.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Emuge - 16mm Diam, 48mm LOC, 2 Flute Solid Carbide Roughing & Finishing End Mill - TiAlN Finish, 108mm OAL, 16mm Shank Diam, Cylindrical Shank, 38° Helix, Centercutting, Extra Long Length

Item #: 47937396
Brand: Emuge
Model #: 2514A.016
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.

Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.

Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.

Product Specifications
Mill Diameter (mm)	16.00
End Type	Square
Chamfer Length (mm)	0.20
Number of Flutes	2
Material	Solid Carbide
Finish/Coating	TiAlN
Length of Cut (mm)	48.0000
Shank Diameter (mm)	16
Overall Length (mm)	108
Centercutting	Center Cutting
Extended Reach	ExtendedReach
Shank Type	Cylindrical
Helix Angle	38
Single or Double End	Single
Length Type	Extra Long
Cutting Direction	Right Hand
Flute Direction	Right Hand
Mill Diameter Tolerance (mm)	-0.07
Series/List	2514A

Product Specifications

Mill Diameter (mm) 16.00

End Type Square

Chamfer Length (mm) 0.20

Number of Flutes 2

Material Solid Carbide

Finish/Coating TiAlN

Length of Cut (mm) 48.0000

Shank Diameter (mm) 16

Overall Length (mm) 108

Centercutting Center Cutting

Extended Reach ExtendedReach

Shank Type Cylindrical

Helix Angle 38

Single or Double End Single

Length Type Extra Long

Cutting Direction Right Hand

Flute Direction Right Hand

Mill Diameter Tolerance (mm) -0.07

Series/List 2514A

$385.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Weldon - 1-1/4" Diam, 2" LOC, 6 Flute Cobalt Roughing & Finishing Square End Mill - Uncoated, 4-1/2" OAL, 1-1/4" Shank Diam, Weldon Shank, 30° Helix, Non-Centercutting

Item #: 81753741
Brand: Weldon
Model #: KPA40-8
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.

Uncoated tools do not feature supportive treatments on the cutting edge. They are used at reduced speeds for general applications on nonferrous metals.

Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.

Product Specifications
Mill Diameter (Inch)	1-1/4
Mill Diameter (Decimal Inch)	1.2500
End Type	Square
Number of Flutes	6
Material	Cobalt
Finish/Coating	Uncoated
Length of Cut (Inch)	2
Length of Cut (Decimal Inch)	2.0000
Shank Diameter (Inch)	1-1/4
Overall Length (Inch)	4-1/2
Centercutting	Non-Center Cutting
Extended Reach	NonExtendedReach
Shank Type	Weldon Shank
Helix Angle	30
Material Grade	M42
Single or Double End	Single
Cutting Direction	Right Hand
Flute Direction	Right Hand
Mill Diameter Tolerance (Decimal Inch)	+0.003/-0.003

Product Specifications

Mill Diameter (Inch) 1-1/4

Mill Diameter (Decimal Inch) 1.2500

End Type Square

Number of Flutes 6

Material Cobalt

Finish/Coating Uncoated

Length of Cut (Inch) 2

Length of Cut (Decimal Inch) 2.0000

Shank Diameter (Inch) 1-1/4

Overall Length (Inch) 4-1/2

Centercutting Non-Center Cutting

Extended Reach NonExtendedReach

Shank Type Weldon Shank

Helix Angle 30

Material Grade M42

Single or Double End Single

Cutting Direction Right Hand

Flute Direction Right Hand

Mill Diameter Tolerance (Decimal Inch) +0.003/-0.003

$239.74

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 6" Diam x 1/4" Width of Cut, 28 Teeth, Cobalt Side Milling Cutter - Straight Teeth, Uncoated

Item #: 72956162
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Straight tooth cutters are used for general purpose applications and where a deeper cut is not required. They have more teeth than staggered cutters for a finer finish on the workpiece.

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.

Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.

Product Specifications
Cutter Diameter (Inch)	6
Cutting Width (Inch)	1/4
Cutting Width (Decimal Inch)	0.2500
Tooth Configuration	Straight
Material	Cobalt
Finish/Coating	Uncoated
Arbor Hole Diameter (Inch)	1-1/4
Number of Teeth	28
Material Application	Ferrous Metals; Non-Ferrous Metals; Non-Metals

Product Specifications

Cutter Diameter (Inch) 6

Cutting Width (Inch) 1/4

Cutting Width (Decimal Inch) 0.2500

Tooth Configuration Straight

Material Cobalt

Finish/Coating Uncoated

Arbor Hole Diameter (Inch) 1-1/4

Number of Teeth 28

Material Application Ferrous Metals; Non-Ferrous Metals; Non-Metals

$434.20

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It