4 - Air Hardening Flat Stock

Item #: LY562405
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: A-2 *Thick: 3/8 *Width: 1-1/4

Description:
*A-2 Air Hardening Ground Flat Stock 36" Length *Made from fine grain, electric furnace air-hardening, 5 chrome tool steel *Has excellent wear and abrasion resistance properties *Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections. *Low sulphur content makes it non-freemachining. *HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately. *Tolerance Thickness ±.001" Width +.000/.005" *Larger Sizes A-2 available thru 1" thickness *Oversize tolerances available thru 2" thickness *Many other types of gage stock available *Modified Nutec 42 *A-6 Diecrat *D-2 Aristocrat *S-7 *C-1018 Marshallcrat low carbon

Shipping Info:
*Actual Weight - 4.8400

$128.16

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

24 x 1/8 x 3 - Low Carbon Flat Stock

Item #: LY8000206
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 24 *Material: Low Carbon *Thick: 1/8 *Width: 3

Description:
*Low-Carbon 24" Length Ground Flat Stock *A fine-grained, vacuum-degassed carbon steel *Easily machined, has excellent weldability and responds uniformly to case hardening *Manganese content provides greater strength and hardness compared to many other carbon steels *Often used in its natural state for such applications as backup plate, stripper plates, punch pads and machine parts *Used for jigs, fixtures, cams and patterns *Hardening: CARBURIZING: For maximum depth of hardening, 1/21", hold in carburizing salt at 1700?F for 3 hours. CASE HARDENING: Hold in sodium cyanide salt bath at 1500?F for 30 minutes. Maximum case is .006"

Shipping Info:
*Actual Weight - 2.5800

$67.30

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/16 x 2-1/2 x 24 - 498 Low Carbon Precision Ground Flat Stock

Item #: LY8054956
Manufacturer: Starrett
Mfg #: 54956

Technical Specifications:
*Brand Name: Starrett *Length: 24 *Material: LC *Thick: 5/16 *Width: 2-1/2

Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost * Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc. *This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher. *Furnished in 24" (610mm) lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 5.3100

$207.94

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 3/32 x 3 - Oil Hardening Flat Stock

Item #: LY5100608
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 3/32 *Width: 3

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 2.9420

$96.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 7/8 x 1 - Oil Hardening Flat Stock

Item #: LY5005602
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: O-1 *Thick: 7/8 *Width: 1

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 4.5700

$106.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 3/64 x 1-1/2 - Oil Hardening Flat Stock

Item #: LY5100305
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 3/64 *Width: 1-1/2

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - .7300

$65.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4 x 4 x 18 - Oversize Air Hardening Flat Stock

Item #: LY4657218
Manufacturer: Starrett
Mfg #: 57218

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: A-2 *Thick: 3/4 *Width: 4

Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance *Oversize: +.010"/.015" thickness tolerance *Maintains close dimensional accuracy throughout the heat treating process *The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life. *Up to 50% more pieces per sharpening can be produced than with oil hardening steel *High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material *Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof *Full-length identification eliminates confusion with other steels *Furnished in 18" and 36" lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 15.3000

$571.26

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 1/8 x 6 - Oversize Air Hardening Flat Stock

Item #: LY70816
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: A-2 *Thick: 1/8 *Width: 6

Description:
*Oversize A-2 Air Hardening Ground Flat Stock

Shipping Info:
*Actual Weight - 4.2600

$118.37

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 3/4 x 3-1/2 - Oil Hardening Flat Stock

Item #: LY4054483
Manufacturer: Starrett
Mfg #: 54483

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 3/4 *Width: 3-1/2

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 27.0700

$615.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

24 x 1/4 x 5 - Low Carbon Flat Stock

Item #: LY8000668
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 24 *Material: Low Carbon *Thick: 1/4 *Width: 5

Description:
*Low-Carbon 24" Length Ground Flat Stock *A fine-grained, vacuum-degassed carbon steel *Easily machined, has excellent weldability and responds uniformly to case hardening *Manganese content provides greater strength and hardness compared to many other carbon steels *Often used in its natural state for such applications as backup plate, stripper plates, punch pads and machine parts *Used for jigs, fixtures, cams and patterns *Hardening: CARBURIZING: For maximum depth of hardening, 1/21", hold in carburizing salt at 1700?F for 3 hours. CASE HARDENING: Hold in sodium cyanide salt bath at 1500?F for 30 minutes. Maximum case is .006"

Shipping Info:
*Actual Weight - 8.6000

$154.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1-1/2 x 1-1/2 - Oil Hardening Flat Stock

Item #: LY5113201
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1-1/2 *Width: 1-1/2

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 23.3800

$358.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 3/8 x 3/4 - Air Hardening Flat Stock

Item #: LY552403
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: A-2 *Thick: 3/8 *Width: 3/4

Description:
*A-2 Air Hardening Ground Flat Stock 18" Length *Made from fine grain, electric furnace air-hardening, 5 chrome tool steel *Has excellent wear and abrasion resistance properties *Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections. *Low sulphur content makes it non-freemachining. *HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately. *Tolerance Thickness ±.001" Width +.000/.005" *Larger Sizes A-2 available thru 1" thickness *Oversize tolerances available thru 2" thickness *Many other types of gage stock available *Modified Nutec 42 *A-6 Diecrat *D-2 Aristocrat *S-7 *C-1018 Marshallcrat low carbon

Shipping Info:
*Actual Weight - 1.4500

$53.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1/2 x 4 - Oil Hardening Flat Stock

Item #: LY5103211
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1/2 *Width: 4

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 20.7200

$292.90

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 3/8 x 1/2 - Oversize Air Hardening Flat Stock

Item #: LY702402
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: A-2 *Thick: 3/8 *Width: 1/2

Description:
*Oversize A-2 Air Hardening Ground Flat Stock

Shipping Info:
*Actual Weight - 1.0200

$46.61

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1/4 x 2-1/2 - Air Hardening Flat Stock

Item #: LY561612
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: A-2 *Thick: 1/4 *Width: 2-1/2

Description:
*A-2 Air Hardening Ground Flat Stock 36" Length *Made from fine grain, electric furnace air-hardening, 5 chrome tool steel *Has excellent wear and abrasion resistance properties *Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections. *Low sulphur content makes it non-freemachining. *HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately. *Tolerance Thickness ±.001" Width +.000/.005" *Larger Sizes A-2 available thru 1" thickness *Oversize tolerances available thru 2" thickness *Many other types of gage stock available *Modified Nutec 42 *A-6 Diecrat *D-2 Aristocrat *S-7 *C-1018 Marshallcrat low carbon

Shipping Info:
*Actual Weight - 6.4500

$150.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1/8 x 5/8 - Oil Hardening Flat Stock

Item #: LY5100803
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1/8 *Width: 5/8

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - .8500 *Dimensions - Height: .160 Length: 37.2 Width: 1.50

$31.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 9/16 x 1 - Oil Hardening Flat Stock

Item #: LY5003603
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: O-1 *Thick: 9/16 *Width: 1

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 2.8960

$73.61

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 3/64 x 3/4 - Oil Hardening Flat Stock

Item #: LY5100302
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 3/64 *Width: 3/4

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - .3600

$39.83

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

24 x 1/4 x 6 - Low Carbon Flat Stock

Item #: LY8000168
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 24 *Material: Low Carbon *Thick: 1/4 *Width: 6

Description:
*Low-Carbon 24" Length Ground Flat Stock *A fine-grained, vacuum-degassed carbon steel *Easily machined, has excellent weldability and responds uniformly to case hardening *Manganese content provides greater strength and hardness compared to many other carbon steels *Often used in its natural state for such applications as backup plate, stripper plates, punch pads and machine parts *Used for jigs, fixtures, cams and patterns *Hardening: CARBURIZING: For maximum depth of hardening, 1/21", hold in carburizing salt at 1700?F for 3 hours. CASE HARDENING: Hold in sodium cyanide salt bath at 1500?F for 30 minutes. Maximum case is .006"

Shipping Info:
*Actual Weight - 10.3200

$184.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

24 x 3/8 x 1-1/4 - Low Carbon Flat Stock

Item #: LY8000137
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 24 *Material: Low Carbon *Thick: 3/8 *Width: 1-1/4

Description:
*Low-Carbon 24" Length Ground Flat Stock *A fine-grained, vacuum-degassed carbon steel *Easily machined, has excellent weldability and responds uniformly to case hardening *Manganese content provides greater strength and hardness compared to many other carbon steels *Often used in its natural state for such applications as backup plate, stripper plates, punch pads and machine parts *Used for jigs, fixtures, cams and patterns *Hardening: CARBURIZING: For maximum depth of hardening, 1/21", hold in carburizing salt at 1700?F for 3 hours. CASE HARDENING: Hold in sodium cyanide salt bath at 1500?F for 30 minutes. Maximum case is .006"

Shipping Info:
*Actual Weight - 3.2300

$73.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It