CAT40 5/16 x 3.15 - Shrink Fit Tool Holder

Item #: GM94C40313159
Manufacturer: Parlec
Mfg #: C40-31SF31

Technical Specifications:
*Bore Diameter: 5/16 *Brand Name: Parlec *Gage Length: 3.150 *Model Number: C40-31SF315-9 *Shank: CAT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 3.0000

$268.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/16" CAT 40 Shrink Fit Toolholder - 3.15" Gauge Length

Item #: GM30031315D
Manufacturer: Briney
Mfg #: V40SF-031-

Technical Specifications:
*Bearing Surface: 1.024 *Bore Diameter: 5/16 *Brand Name: Briney *Gage Length: 3.150 *Outside Diameter: .984 *Shank: CAT40 *Standard: DIN *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 3.5000

$270.22

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT30 3/4"-3" - Shrink Fit Holder

Item #: TE1267750
Manufacturer: Techniks
Mfg #: 67750

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 19.1mm *Gage Length: 3 *Outside Diameter: 1.81 *Shank: 3/4 *Standard: ISO 1940 *Type: Shrink Fit BT Holder *USA-ANSI Tool Shank Range: 3/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1031

$247.79

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK 50E 1/4"-3.54" - Shrink Fit Holder

Item #: TE1239018E
Manufacturer: Techniks
Mfg #: 39018-E

Technical Specifications:
*Bore Diameter: 1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 6.4mm *Gage Length: 3.54 *Outside Diameter: 1.97 *Shank: 1/4 *Standard: ISO 1940 *Type: Shrink Fit HSK Holder *USA-ANSI Tool Shank Range: 1/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - 1.0000

$236.57

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/16" Strght SH 3/4" Dia. Shrink Extension 4.33 Long

Item #: GM265051698
Manufacturer: Bilz
Mfg #: 5051698

Technical Specifications:
*Bearing Surface: 25mm *Bore Diameter: 3/16" *Brand Name: Bilz *Gage Length: 2.28 *Outside Diameter: 3/4" *Shank: Straight *Type: Shrink Fit Extension

Description:

Shipping Info:
*Actual Weight - 2.5000

$209.04

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4 -1/4X6.30"GL SHRINK EXTENSION

Item #: HA717834Z014Z1
Manufacturer: Haimer USA LLC
Mfg #: 78.3/4Z0.1

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .5500

$250.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4" CAT 40 Shrink Fit Toolholder - 4.72" Gauge Length

Item #: GM30075472D
Manufacturer: Briney
Mfg #: V40SF-075-

Technical Specifications:
*Bearing Surface: 1.654 *Bore Diameter: 3/4 *Brand Name: Briney *Gage Length: 4.724 *Outside Diameter: 1.575 *Shank: CAT40 *Standard: DIN *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 4.5000

$336.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1"-6" - Shrink Fit Holder with Coolblast

Item #: TE1229070B
Manufacturer: Techniks
Mfg #: 29070B

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Techniks *European-DIN Tool Shank Range: 25.4mm *Gage Length: 6 *Outside Diameter: 3.88 *Shank: 1 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .6593

$394.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40 1/4 x 6.30 - Shrink Fit Tool Holder

Item #: GM94BT40256309
Manufacturer: Parlec
Mfg #: BT40-25SF6

Technical Specifications:
*Bore Diameter: 1/4 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: BT40-25SF630-9 *Shank: BT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 5.0000

$316.11

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4-1/2X7.87"GL SHRINK EXTENSION

Item #: HA717734Z212Z
Manufacturer: Haimer USA LLC
Mfg #: 77.3/4Z2.1

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .5500

$286.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 14mm x 130mm Shrink Fit Chuck

Item #: HA7150844144
Manufacturer: Haimer USA LLC
Mfg #: 50.844.14.

Technical Specifications:
*Bore Diameter: 14mm *Brand Name: Haimer USA LLC *Gage Length: 130mm *Model Number: 50.844.14.4 *Outside Diameter: 34mm *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *Highest Possible Clamping Force *< 3-micron T.I.R. *All functional surfaces precision ground

Shipping Info:
*Actual Weight - 8.2500

$591.43

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1/4 x 3.54 - Shrink Fit Tool Holder

Item #: GM94C50253159
Manufacturer: Parlec
Mfg #: C50-25SF31

Technical Specifications:
*Bore Diameter: 1/4 *Brand Name: Parlec *Gage Length: 3.150 *Model Number: C50-25SF315-9 *Shank: CAT50 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 8.0000

$327.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

ER32 SRK 1/8X3.500 SHRINK FIT HLDR

Item #: EH4500701
Manufacturer: Iscar
Mfg #: 4500701

Technical Specifications:
*Brand Name: Iscar

Description:

Shipping Info:
*Actual Weight - .6060

$185.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/4" CAT 40 Shrink Fit Toolholder - 2.75" Gauge Length

Item #: GM3025275
Manufacturer: Briney
Mfg #: V40SF-025-

Technical Specifications:
*Bearing Surface: .750 *Bore Diameter: 1/4 *Brand Name: Briney *Gage Length: 2.750 *Outside Diameter: 1.000 *Shank: CAT40 *Standard: ANSI *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 2.5000

$270.22

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

ER32 SRK 1/2X1.500 JET2 SHRINK FIT

Item #: EH4500907
Manufacturer: Iscar
Mfg #: 4500907

Technical Specifications:
*Brand Name: Iscar

Description:

Shipping Info:
*Actual Weight - .5070

$136.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4" CAT 50 Shrink Fit Toolholder - 7.0" Gauge Length

Item #: GM3075700
Manufacturer: Briney
Mfg #: V50SF-075-

Technical Specifications:
*Bearing Surface: 1.250 *Bore Diameter: 3/4 *Brand Name: Briney *Gage Length: 7.000 *Outside Diameter: 1.500 *Shank: CAT50 *Standard: ANSI *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 12.0000

$496.09

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

10mm CAT 40 Shrink Fit Toolholder - 160mm Gauge Length

Item #: GM3010M160D
Manufacturer: Briney
Mfg #: V40SF-10M-

Technical Specifications:
*Bearing Surface: 32mm *Bore Diameter: 10mm *Brand Name: Briney *Gage Length: 6.299 *Outside Diameter: 30mm *Shank: CAT40 *Standard: DIN *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 4.0000

$369.65

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CF12-4-35

Item #: TP348910053
Manufacturer: OSG USA, Inc.
Mfg #: 8910053

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - .4100 *Dimensions - Height: 1.15 Length: 3.25 Width: 1.30

$424.23

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK-E50 1/8" Bore Dia. x 3.15 Gage Length Shrink Fit Toolholder

Item #: GM269079264
Manufacturer: Bilz
Mfg #: 9079264

Technical Specifications:
*Bearing Surface: 1.42 *Bore Diameter: 1/8" *Brand Name: Bilz *Gage Length: 3.15 *Outside Diameter: 1.06 *Shank: HSK-E50 *Type: Shrink Fit Toolholder

Description:

Shipping Info:
*Actual Weight - 1.5000

$312.03

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK 63A 3/8" x 85 - Shrink Fit Holder

Item #: TE1293117
Manufacturer: Techniks
Mfg #: 93117

Technical Specifications:
*Bore Diameter: 3/8 *Brand Name: Techniks *European-DIN Tool Shank Range: 9.5mm *Gage Length: 85mm *Outside Diameter: 2.48 *Shank: 3/8 *Standard: ISO 1940 *Type: Shrink Fit HSK Holder *USA-ANSI Tool Shank Range: 3/8

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1375

$289.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It